GUNGNIR 110R
EVA e-PROJECT
User Guide
Accessories
| Item | Name / Q’ty | Used for |
 |
1 to 3 fan splitter cable x1 | Connect fans |
 |
Cable ties x6 | Cable management |
 |
Screw M3 5mm x17 | Motherboard / SSD |
 |
Screw #6-32 6mm x6 | PSU / PCIe Card |
 |
Screw #6-32 6mm x2 | HDD |
Specification
| Fan LED Controller | 1 to 6 ARGB (3 pin) Control Board |
| Pre-Installed Fan | Front: 120 mm ARGB fans x3 Rear: 120 mm ARGB fan x1 |
| Case Dimensions | 430(D) x 215(W) x 450(H) 16.92(D) x 8.46(W) x 17.71(H) inch |
| Motherboard Support | ATX / M-ATX / Mini-ITX |
| Drive Bays | 2x 3.5″ / 2.5″ combo trays 2x 2.5″ SSD trays |
| IO Panel | 1x Power button 1x LED switch button 1x Reset button 1x Mic in jack 1x Audio out jack 2x USB 3.2 Gen1 Type A ports 1x USB 3.2 Gen2 Type C port |
| Fan Support | Top: 120 mm x2 / 140 mm x2 Front: 120mm x 3 / 140mm x 2 Rear: 120 mm x1 |
| Radiator Support | Top: 120 /240 mm Front: 120 / 140 / 240 / 280 / 360 mm Rear: 120 mm |
| Clearance | CPU Cooler Height: Max 170 mm / 6.69 inch Graphics Card Length: Max 340 mm / 13.38 inch PSU Length: Max 250 mm / 9.84 inch |
| Material | Left Side: Tempered glass Right Side: Metal Top: Metal Front: Glass + Metal |
Case Features
Side & Front View
IO Panel
| 1. Power button 2. Reset button 3. Power LED 4. USB 3.2 Gen2 Type C |
5. USB 3.2 Gen1 Type A 6. Mic in 7. Audio out 8. LED switch button |
LED effects:
Short press the LED switch button to change up to 27 modes.
Press and hold the LED switch for 3 seconds the LED flash white light once, and then into the MSI motherboard Mystic Light synchronization mode. Short press once to back to the Hub control mode.
Press and hold the LED switch for 6 seconds to turn off the LED.
SSD & HDD Installation
Opening the Left & Right Side Cover
Motherboard Installation
Cables Connection
Graphics Card Installation
PSU Installation
Specifications
| Accessories | Item Name / Q’ty | Used for |
|---|---|---|
| 1 to 3 fan splitter cable | x1 | Connect fans |
| Cable ties | x6 | Cable management |
| Screw M3 5mm | x17 | Motherboard / SSD |
| Screw #6-32 6mm | x6 | PSU / PCIe Card |
| Screw #6-32 6mm | x2 | HDD |
| Specification | ||
| Fan LED Controller | 1 to 6 ARGB (3 pin) Control Board | |
| Pre-Installed Fan | Front: 120 mm ARGB fans x3 Rear: 120 mm ARGB fan x1 |
|
| Case Dimensions | 430(D) x 215(W) x 450(H) 16.92(D) x 8.46(W) x 17.71(H) inch |
|
| Motherboard Support | ATX / M-ATX / Mini-ITX | |
| Drive Bays | 2x 3.5″ / 2.5″ combo trays 2x 2.5″ SSD trays |
|
| IO Panel | 1x Power button 1x LED switch button 1x Reset button 1x Mic in jack 1x Audio out jack 2x USB 3.2 Gen1 Type A ports 1x USB 3.2 Gen2 Type C port |
|
| Fan Support | Top: 120 mm x2 / 140 mm x2 Front: 120mm x 3 / 140mm x 2 Rear: 120 mm x1 |
|
| Radiator Support | Top: 120 /240 mm Front: 120 / 140 / 240 / 280 / 360 mm Rear: 120 mm |
|
| Clearance | CPU Cooler Height: Max 170 mm / 6.69 inch Graphics Card Length: Max 340 mm / 13.38 inch PSU Length: Max 250 mm / 9.84 inch |
|
| Material | ||
| Left Side | Tempered glass | |
| Right Side | Metal | |
| Top | Metal | |
| Front | Glass + Metal | |
| Case Features | ||
| Side & Front View | ||
| IO Panel | 1. Power button 2. Reset button 3. Power LED 4. USB 3.2 Gen2 Type C 5. USB 3.2 Gen1 Type A 6. Mic in 7. Audio out 8. LED switch button |
|
| LED effects | Short press the LED switch button to change up to 27 modes. Press and hold the LED switch for 3 seconds the LED flash white light once, and then into the MSI motherboard Mystic Light synchronization mode. Short press once to back to the Hub control mode. Press and hold the LED switch for 6 seconds to turn off the LED. |
|
| SSD & HDD Installation | ||
| Opening the Left & Right Side Cover | ||
| Motherboard Installation | ||
| Cables Connection | ||
| Graphics Card Installation | ||
| PSU Installation |
FAQ’s
The accessories included with the MSI Evangelion Case: MPG GUNGNIR 110R EVA e-PROJECT are a fan splitter cable, cable ties, and screws for motherboard, SSD, PSU, PCIe card, and HDD installation.
The fan LED controller is a 1 to 6 ARGB (3 pin) control board.
The case comes with three 120 mm ARGB fans at the front and one 120 mm ARGB fan at the rear.
The dimensions of the MSI Evangelion Case: MPG GUNGNIR 110R EVA e-PROJECT are 430(D) x 215(W) x 450(H) mm or 16.92(D) x 8.46(W) x 17.71(H) inches.
The case supports ATX, M-ATX, and Mini-ITX motherboards.
The case has two 3.5″/2.5″ combo trays and two 2.5″ SSD trays.
The IO panel includes a power button, LED switch button, reset button, mic in jack, audio out jack, two USB 3.2 Gen1 Type A ports, and one USB 3.2 Gen2 Type C port.
The case can accommodate a CPU cooler with a maximum height of 170 mm or 6.69 inches.
The case can accommodate a graphics card with a maximum length of 340 mm or 13.38 inches.
The case can accommodate a PSU with a maximum length of 250 mm or 9.84 inches.
You can change the LED effects of the case by short pressing the LED switch button. There are up to 27 modes available.
Documents / Resources
 |
msi MPG GUNGNIR 110R EVA e-PROJECT Gaming Case [pdf] User Guide MPG GUNGNIR 110R EVA e-PROJECT Gaming Case, EVA e-PROJECT Gaming Case, MPG GUNGNIR 110R, Gaming Case, Case |
