IBO OHI 32-60/180

IBO OHI 32-60/180 3-Stage Heating Circulation Pump User Manual

Model: OHI 32-60/180 | Brand: IBO

1. Pengenalan

Thank you for choosing the IBO OHI 32-60/180 3-Stage Heating Circulation Pump. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new pump. Please read this manual thoroughly before installation and use, and keep it for future reference.

2. Arahan Keselamatan

Penting: Failure to follow these safety instructions may result in electric shock, fire, serious injury, or property damage.

3. Produk Lebihview

The IBO OHI 32-60/180 is a robust 3-stage circulation pump designed for heating systems. Its construction and high-quality materials ensure quiet operation and reliable performance. The pump features a ceramic rotor shaft for durability.

Ciri-ciri Utama:

IBO OHI 32-60/180 Circulation Pump

Figure 1: IBO OHI 32-60/180 Circulation Pump. This image shows the main body of the pump, typically orange in color, with connection points for the heating system pipes.

4. Persediaan dan Pemasangan

Before installation, ensure the system is depressurized and drained. The pump should be installed in a horizontal position with the motor shaft horizontal.

  1. Sediakan Tapak Pemasangan: Ensure there is sufficient space around the pump for maintenance and ventilation.
  2. Pemasangan: Securely mount the pump to the piping system. The mounting height is 180 mm.
  3. Sambungkan Paip: Connect the heating system pipes to the pump. The threaded connection diameter is 2" / 1 1/2". Ensure all connections are sealed properly using the provided gaskets.
  4. Sambungan Elektrik: A qualified electrician must perform the electrical wiring. Connect the pump to a suitable power supply (230V, 50Hz) according to local electrical codes. Ensure proper grounding.
  5. Fill and Vent System: After installation, fill the heating system with water and thoroughly vent all air from the system, including the pump.

5. Arahan Operasi

The IBO OHI 32-60/180 pump features a 3-speed motor, allowing you to adjust its performance to your heating system's requirements.

  1. Hidupkan kuasa: Once the pump is installed and the system is filled and vented, switch on the main power supply to the pump.
  2. Pilih Tetapan Kelajuan: The pump has a selector switch for three different speed levels. Choose the appropriate level based on your system's demand:
    • Tahap 1: 46W power consumption, 22 l/min flow rate, 3 m delivery height. Suitable for lower heating demands.
    • Tahap 2: 63W power consumption, 38 l/min flow rate, 5 m delivery height. A balanced setting for typical heating needs.
    • Tahap 3: 93W power consumption, 55 l/min flow rate, 6 m delivery height. For maximum heating performance.
  3. Pemantauan: Periodically check the system pressure and pump operation to ensure optimal performance.

6. Penyelenggaraan

Regular maintenance ensures the longevity and efficient operation of your circulation pump.

7. Penyelesaian masalah

Bahagian ini menyediakan penyelesaian kepada isu-isu biasa yang mungkin anda hadapi. Untuk masalah yang tidak disenaraikan di sini, hubungi kakitangan servis yang berkelayakan.

MasalahKemungkinan PuncaPenyelesaian
Pam tidak bermulaNo power supply; Motor seized; Air in pump.Check power connection and circuit breaker; Try to free the rotor (consult technician); Vent the pump and system.
Pam bisingAir in system; Cavitation; Foreign objects in pump.Vent the system thoroughly; Check system pressure; Disconnect power and inspect pump (consult technician).
Aliran/tekanan yang tidak mencukupiIncorrect speed setting; Air in system; Blockage in pipes/pump; Low system pressure.Adjust speed setting; Vent the system; Check for blockages; Increase system pressure.
Kebocoran pada sambunganLoose connections; Damaged gaskets.Tighten connections; Replace gaskets.

8. Spesifikasi Teknikal

ParameterNilai
Nombor ModelOHI 32-60/180
PengeluarDAMBAT JASTRZĘBSKI S.K.A.
Threaded Connection Diameter2" / 1 1/2"
Tekanan Nominal10 bar
Ketinggian Pemasangan180 mm
Ketinggian Penghantaran Maksimum6 m
Kadar Aliran Maksimum55 Liter seminit
Power Consumption (Level 1)46W
Power Consumption (Level 2)63W
Power Consumption (Level 3)93W
bahanBesi tuang
Sumber KuasaKabel Elektrik
Dimensi Produk18 x 20 x 21 cm
Komponen TermasukPump with seals

9. Waranti dan Sokongan

This IBO product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.

For technical support, spare parts, or warranty claims, please contact your retailer or the manufacturer's authorized service center. Keep your proof of purchase handy when contacting support.

Pengeluar: DAMBAT JASTRZĘBSKI S.K.A.

Dokumen Berkaitan - OHI 32-60/180

Praview IBO OHI / OHI MAX Circulation Pump Instruction Manual
Comprehensive instruction manual for IBO OHI and OHI MAX series circulation pumps, covering safety, installation, operation, technical specifications, and troubleshooting. Includes EC declaration of conformity and warranty information.
Praview Instrukcja obsługi pomp cyrkulacyjnych IBO OHI
Kompletna instrukcja obsługi dla pomp cyrkulacyjnych IBO z serii OHI. Zawiera informacje o instalacji, użytkowaniu, konserwacji i parametrach technicznych dla modeli takich jak OHI 15-60/130, OHI 25-40/130 i wielu innych.
Praview Návod k použití: IBO AUTO IBO Povrchová čerpadla a Hydrofory
Kompletní návod k použití pro povrchová čerpadla a hydrofory IBO AUTO IBO. Obsahuje informace o instalaci, provozu, údržbě, řešení problémů a technické specifikace.
Praview IBO AMG & AMG SOLAR Circulation Pumps - User Manual
Comprehensive user and installation manual for IBO AMG and AMG SOLAR energy-efficient circulation pumps. Covers safety, installation, operation, technical specifications, troubleshooting, and EU declaration of conformity.
Praview IBF-02 Magnetic Separator - Operating Manual and Installation Guide
Comprehensive operating manual and installation guide for the IBO IBF-02 Magnetic Separator, detailing its features, technical specifications, installation procedures, maintenance, and safety precautions for central heating systems.
Praview IBO IPTL Pompy do gorącej i zimnej wody - Instrukcja obsługi
Instrukcja obsługi dla pomp IBO IPTL przeznaczonych do cyrkulacji gorącej i zimnej wody. Zawiera informacje o instalacji, danych technicznych, konserwacji i rozwiązywaniu problemów.