Manual Arahan Meja Angkat Hidraulik Gunting Berganda VEVOR 500 paun

1. Produk Lebihview

The VEVOR 500 lbs Double Scissor Hydraulic Lift Table (Model TFD20) is designed for efficient and safe material handling and transportation. Constructed from high-strength carbon steel with a rust-resistant coating, this lift table offers a robust solution for various lifting tasks in workshops, warehouses, supermarkets, and repair garages. Its dual scissor mechanism provides stable lifting, and the manual hydraulic pump allows for smooth height adjustments.

Figure 1: VEVOR 500 lbs Double Scissor Hydraulic Lift Table with key dimensions (28x18 inch tabletop, 11.8-47.2 inch lifting height).

Ciri-ciri Utama:

• 500 lbs Heavy-duty Capacity: Robust construction from high-strength, thickened carbon steel with a rust-resistant spray coating. Tabletop measures 28 x 18 inches.
• Smooth Lifting: High-efficiency hydraulic pump for height adjustments from 11.8 to 47.2 inches. Integrated design prevents oil leaks.
• Operasi mudah: Simple assembly. Foot pedal for lifting, hydraulic release handle for lowering.
• Reka Bentuk Mudah Alih: Equipped with two directional wheels and two 360° PU swivel wheels for easy movement. Features a brake lock function for stability.
• Security Safeguard Device: Dual scissor structure with guard bars on both sides to prevent accidental lowering and enhance safety during operation and maintenance.

2. Maklumat Keselamatan

Always prioritize safety when operating the VEVOR Hydraulic Lift Table. Failure to follow safety guidelines can result in serious injury or equipment damage.

• Baca Manual: Fully understand all instructions and warnings before use.
• Kapasiti Muatan: Never exceed the rated load capacity of 500 lbs (226 kg). Overloading can cause structural failure and injury.
• Permukaan Stabil: Operate the lift table on a flat, level, and stable surface.
• Muatan Selamat: Ensure the load is centered and stable on the tabletop before lifting or moving. Use the non-slip pad provided.
• Brake Engagement: Always engage the wheel brakes when the lift table is stationary or when loading/unloading items.
• Kawasan Jernih: Keep hands, feet, and other body parts clear of the scissor mechanism during lifting and lowering to prevent pinching injuries.
• Guard Bars: The integrated guard bars provide additional support. Do not remove or modify them.
• Alat Pelindung Diri (PPE): Wear appropriate safety gear, such as safety shoes and gloves, when operating.
• Pemeriksaan: Before each use, inspect the lift table for any signs of damage, wear, or hydraulic fluid leaks. Do not use if damaged.

Figure 2: The dual scissor structure includes guard bars on both sides to prevent accidental lowering and protect against pinching injuries.

3. Persediaan dan Pemasangan

The VEVOR Hydraulic Lift Table requires minimal assembly. Follow these steps to prepare your lift table for use:

1. Membongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati. Periksa untuk sebarang kerosakan penghantaran.
2. Perhimpunan pemegang: Attach the handle to the designated mounting points on the lift table base using the provided screws and tools. Ensure all fasteners are securely tightened.
3. Pad Tidak Licin: Place the rubber non-slip pad onto the tabletop. This enhances stability for items being lifted.
4. Periksa Roda: Verify that all four wheels are securely attached and can rotate freely.

Figure 3: Visual guide for attaching the handle and preparing the lift table for operation.

4. Arahan Operasi

Operating the hydraulic lift table is straightforward. Always ensure the load is stable and within the weight capacity before proceeding.

4.1. Lifting the Tabletop:

1. Position the lift table with the load securely placed on the non-slip pad.
2. Ensure the wheel brakes are engaged if the table needs to remain stationary during lifting.
3. Step on the foot pedal located at the base of the lift table. Continue pressing the pedal until the tabletop reaches the desired height.
4. The hydraulic pump ensures smooth and consistent ascent.

4.2. Lowering the Tabletop:

1. To lower the tabletop, slowly pull the hydraulic release handle, typically located on the handle assembly.
2. Control the descent speed by adjusting the pressure on the release handle. Release the handle to stop lowering.

4.3. Moving the Lift Table:

1. Before moving, ensure the tabletop is in its lowest position for maximum stability, especially with heavy loads.
2. Tanggalkan brek roda.
3. Use the handle to push or pull the lift table to the desired location. The 360° swivel wheels provide easy maneuverability.
4. Once in position, engage the wheel brakes to prevent accidental movement.

Figure 4: Demonstrates using the foot pedal to raise the table and the control handle to lower it.

5. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your VEVOR Hydraulic Lift Table.

• Pembersihan: Keep the tabletop and scissor mechanism clean and free from debris, dirt, and corrosive materials. Use a damp kain untuk pembersihan.
• Pelinciran: Periodically lubricate all pivot points and moving parts of the scissor mechanism with appropriate grease to ensure smooth operation and prevent wear.
• Bendalir Hidraulik: Check the hydraulic fluid level regularly. If the level is low or the fluid appears contaminated, consult a qualified technician for refilling or replacement. Use only recommended hydraulic fluid.
• Pengikat: Periodically check all bolts, nuts, and other fasteners for tightness. Tighten any loose fasteners to prevent instability.
• Pemeriksaan Roda: Inspect wheels and casters for wear, damage, or obstructions. Ensure brakes are functioning correctly.
• Storan: When not in use, lower the tabletop to its minimum height and store the lift table in a dry, protected area to prevent rust and damage.

6. Penyelesaian masalah

This section addresses common issues you might encounter with your hydraulic lift table.

7. Spesifikasi

Figure 5: Comprehensive dimensions and specifications for the VEVOR Hydraulic Lift Table, Model TFD20.

8. Waranti dan Sokongan

VEVOR is committed to providing high-quality products and customer satisfaction. For any questions, concerns, or technical assistance, please contact VEVOR customer support.

• Pulangan: This product is eligible for 30-day easy returns. Please refer to the retailer's return policy for details.
• Sokongan Pelanggan: For assistance, please visit the VEVOR official webtapak atau hubungi terus pasukan perkhidmatan pelanggan mereka.

9. Aplikasi Serbaguna

The VEVOR Hydraulic Lift Table is designed for a wide range of applications, making it an invaluable tool in various settings:

• kilang: Ideal for moving components, tools, and finished products between workstations.
• Gudang: Facilitates the loading and unloading of goods, stacking, and retrieving items from shelves.
• Supermarkets: Useful for stocking shelves, moving heavy inventory, and managing displays.
• Repair Garages: Assists in lifting heavy parts, engines, or tools to a comfortable working height.
• General Material Handling: Any task requiring lifting, positioning, or transporting heavy or bulky items with ease and safety.

Figure 6: The lift table being used to move boxes in a warehouse, demonstrating its utility in various industrial environments.