Manual Pengguna Suis Gigabit 16-Port TP-Link Mercusys MS116GS

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your TP-Link Mercusys MS116GS 16-Port Gigabit Switch. The MS116GS is designed to expand your wired network with high-speed Gigabit Ethernet ports, offering features like Plug & Play setup, Isolation Mode, and Loop Prevention for enhanced network performance and security.

2. Produk Lebihview

The Mercusys MS116GS is a 16-port Gigabit Ethernet switch, ideal for expanding network capacity in homes or small offices. It features a durable metal casing and fanless design for silent operation.

Rajah 2.1: Depan view of the Mercusys MS116GS 16-Port Gigabit Switch, showing 16 RJ45 ports, LED indicators, and mode switches.

Ciri-ciri Utama:

• Port Gigabit Penuh: 16 RJ45 ports with 10/100/1000 Mbps auto-negotiation supporting Auto-MDI/MDIX.
• Pasang dan Main: Simple to use and saves time and effort.
• Mod Pengasingan: Allows one-click client traffic separation for higher security and performance.
• Pencegahan gelung: Automatically detects and blocks network loops to prevent broadcast storms.
• Logam Tahan Lama Casing: Allows for efficient heat dissipation and long network life.
• Operasi senyap: Fanless design for quiet use.

Kandungan Pakej:

• Mercusys MS116GS 16-Port Gigabit Switch
• Penyesuai Kuasa
• Manual Pengguna

3. Persediaan

The MS116GS switch is designed for easy installation. No software configuration is required.

3.1 Pemasangan Fizikal

1. penempatan: Place the switch on a stable, flat surface, such as a desktop, or mount it in a rack. Ensure adequate ventilation around the device.
2. Sambungan Kuasa: Connect the provided power adapter to the switch's power port and then plug the adapter into a standard electrical outlet. The Power LED on the front panel should illuminate.
3. Jaringan rangkaian: Connect your network devices (e.g., computers, printers, IP cameras, routers) to any of the 16 RJ45 ports using Ethernet cables. The corresponding Link/Act LED for each connected port will light up, indicating an active connection.

Rajah 3.1: belakang view of the Mercusys MS116GS, showing the power input and ventilation.

Rajah 3.2: Illustration of the Plug and Play setup, showing the switch connected to a computer.

3.2 Penunjuk LED

The front panel features LED indicators to monitor the switch's status:

• LED kuasa:
  • Hidup: Suis dihidupkan.
  • Mati: Suis dimatikan.
• Link/Act LEDs (for each port):
  • On: A device is connected to the corresponding port.
  • Flashing: Data is being transmitted or received through the corresponding port.
  • Mati: Tidak ada peranti yang disambungkan ke port yang sesuai.

4. Arahan Operasi

The MS116GS switch operates automatically once connected. It supports two special modes: Isolation Mode and Loop Prevention Mode, which can be activated via physical switches on the device.

Rajah 4.1: Close-up of the mode switches for Isolation and Loop Prevention, located on the right side of the switch.

4.1 Mod Pengasingan

Isolation Mode allows for one-click client traffic separation. When enabled, ports 1-14 are isolated from each other, preventing them from communicating directly. All isolated ports can still communicate with ports 15-16 (uplink ports). This mode enhances security and performance by preventing broadcast storms and improving LAN security.

• To enable Isolation Mode: Set the "Isolation" switch to the "On" position.
• To disable Isolation Mode: Set the "Isolation" switch to the "Off" position (Default Mode).

4.2 Loop Prevention Mode

Loop Prevention Mode automatically detects and blocks network loops. A network loop occurs when there are multiple paths between two network devices, which can cause broadcast storms and network instability. When a loop is detected, the switch will block the corresponding port to prevent network disruption.

• To enable Loop Prevention Mode: Set the "Loop Prevention" switch to the "On" position.
• To disable Loop Prevention Mode: Set the "Loop Prevention" switch to the "Off" position (Default Mode).

5. Penyelenggaraan

Proper maintenance ensures the longevity and optimal performance of your MS116GS switch.

• Pembersihan: Bersihkan bahagian luar suis secara berkala dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau aerosol.
• Pengudaraan: Ensure that the ventilation holes on the sides of the switch are not obstructed. Proper airflow is crucial for heat dissipation.
• Bekalan Kuasa: Use only the power adapter provided with the switch. Using an incorrect power adapter may damage the device.
• Persekitaran: Operate the switch within its specified temperature and humidity ranges. Avoid placing it in direct sunlight or near heat sources.

6. Penyelesaian masalah

This section addresses common issues you might encounter with your MS116GS switch.

6.1 LED Kuasa Dimatikan

• Ensure the power adapter is securely connected to the switch and a working electrical outlet.
• Verify that the power outlet is functioning correctly by plugging in another device.

6.2 Link/Act LED is Off for a Connected Device

• Check that the Ethernet cable is securely plugged into both the switch port and the network device.
• Ensure the connected device is powered on and its network adapter is functioning correctly.
• Try a different Ethernet cable or a different port on the switch.
• Verify that the cable length does not exceed the maximum recommended length (typically 100 meters for Ethernet).

6.3 Kelajuan Rangkaian Perlahan

• Ensure all connected devices and cables support Gigabit Ethernet (1000 Mbps) for optimal performance.
• Check for network loops. If Loop Prevention Mode is off, consider enabling it.
• If Isolation Mode is enabled, ensure it is not inadvertently affecting communication between devices that need to interact directly.
• Restart the switch and connected devices.

7. Spesifikasi

8. Waranti dan Sokongan

Untuk maklumat jaminan dan sokongan teknikal, sila rujuk kepada pihak Mercusys rasmi. website or contact your local Mercusys support team. Details regarding spare parts availability and software update guarantees are not provided in the product specifications.

You can find more information and support resources at the official Mercusys webtapak: www.mercusys.com