pengenalan
The Bubot 500P Cordless Robotic Pool Cleaner is designed to revolutionize your pool cleaning experience. Featuring advanced Bluehole suction technology, dual motors, and DirtLock 2.0, this cleaner offers powerful and efficient debris removal for flat above-ground pools and flat-bottom pools. Its cordless design and smart navigation capabilities ensure hassle-free maintenance.
Figure 1: Bubot 500P Cordless Robotic Pool Cleaner
Berakhirview daripada Ciri Utama
- Redefined Suction Power & Effortless Operation: Upgraded Bluehole technology delivers 2X overall performance, 3X more effective leaf removal, and 8X enhanced debris clearance. Features powerful dual motors and one-button operation.
- DirtLock Tech 2.0 & Superior Capacity: Prevents leaks while efficiently draining water in under 5 seconds. Innovative chassis design holds 30% more debris.
- Smart Navigation with Auto-Parking: Advanced sensing technology adjusts path upon wall contact and automatically parks near the wall when the battery is low. Four-color LED indicator for performance monitoring.
- Cordless Convenience & 140-Min Battery Life: Free from cords and hoses, offering up to 140 minutes of runtime and recharging in just 2.5 hours. Ideal for pools up to 1,076 sq.ft.
Figure 2: Bluehole Suction Technology for enhanced cleaning.
Figure 3: DirtLock Technology 2.0 for efficient water drainage and debris retention.
Persediaan
Membuka kotak
Upon opening the package, you will find the pre-assembled Bubot 500P unit, along with essential accessories including the charger, retrieval hook, floating handle, and user manual. The unit is designed for immediate use with minimal assembly required.
Figure 4: Contents of the Bubot 500P package.
Mengecas
To charge the unit, locate the charging port on the top of the cleaner, protected by a seal. Plug the provided charger into a power outlet and then connect it to the cleaner's charging port. An LED indicator on the charger will show red during charging and turn green when fully charged. A full charge typically takes approximately 2.5 hours.
Figure 5: The Bubot 500P connected to its charger.
Attaching Retrieval Leash
The retrieval leash is essential for safely pulling the cleaner out of the pool. Attach the floating handle to the leash and then secure the leash to the designated attachment point on the cleaner. Ensure the leash length is appropriate for your pool's depth, allowing the floating handle to remain accessible at the surface.
Beroperasi
Placing in Pool
Before placing the cleaner in the pool, ensure it is fully charged. Hold the cleaner by its handle and slowly lower it into the water. Keep it submerged until all air is purged from the unit and it fills with water. Once submerged, twist the knob on the top of the cleaner to the 'On' position to activate it. Ensure the cleaner lands on its wheels; if it lands upside down, retrieve it and re-submerge it carefully.
Figure 6: Proper method for submerging the cleaner into the pool.
Kitaran Pembersihan
Once activated, the Bubot 500P will begin its automatic cleaning cycle, navigating the pool floor to collect debris. The four-color LED indicator provides real-time status updates on the cleaner's operation and battery level.
Figure 7: The Bubot 500P actively cleaning the pool floor.
Smart Navigation & Auto-Parking
The cleaner utilizes advanced sensing technology to adjust its path seamlessly upon contact with pool walls, ensuring comprehensive coverage. When the battery is low, the cleaner will automatically park itself near the pool wall for easy retrieval.
Penyelenggaraan
Pengambilan
After the cleaning cycle is complete or the battery is low, the cleaner will auto-park near the pool wall. Use the retrieval leash to gently pull the cleaner to the edge of the pool. As you lift it, the DirtLock 2.0 technology will efficiently drain water while retaining collected debris.
Figure 8: Retrieving the cleaner from the pool, allowing water to drain.
Cleaning Filter & Unit
To clean the unit, first twist the knob to the 'Off' position. Then, release the side tabs to open the top cover. Remove the filter basket, which will contain all the collected debris. Empty the debris and rinse both the filter and the cleaner's chassis thoroughly with a garden hose. Reassemble the unit by placing the filter back into the chassis and snapping the top cover into place, ensuring the convex cutouts on the wheels align with the top cover.
Menyelesaikan masalah
If your Bubot 500P is not performing as expected, consider the following:
- Semak Tahap Bateri: Ensure the unit is fully charged. Refer to the LED indicator for battery status.
- Kosongkan Serpihan: A clogged filter or intake can reduce suction. Clean the filter basket and inspect intake ports for blockages.
- Pool Surface: The cleaner is designed for flat above-ground and flat-bottom pools. Significant dips or wrinkles in the liner may impede movement.
- Lampiran Berus: Ensure the brushes are properly attached and not hindering movement, or remove them if they are causing issues with drains or uneven surfaces.
Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nama Model | Bubot 500P |
| Sumber Kuasa | Dikuasakan Bateri |
| Voltage | 22.2 Volt |
| Jenis Bateri | Litium-Ion |
| Kandungan Tenaga Bateri | Jam 60 Watt |
| Masa Mengecas | 2.5 Jam |
| Masa jalan | Sehingga 140 minit |
| Kawasan Kolam Renang Maks | 1,076 kaki persegi |
| Kaedah Kawalan | Sentuh |
| Berat Barang | 16.91 paun |
| Dimensi Produk | 15.1 x 9.84 x 16.5 inci |
Waranti dan Sokongan
The Bubot 500P comes with a 1-year warranty. For any questions or assistance, please contact our dedicated customer support team. We are committed to providing trustworthy service and support to ensure your peace of mind.
