1. Pengenalan
The XTOOL IP500 is a professional OBD2 diagnostic scan tool specifically designed for Toyota, Lexus, and Scion vehicles. It provides comprehensive full system diagnosis, bi-directional control, and various reset services, enabling users to accurately identify and resolve vehicle issues. This manual provides instructions for setting up, operating, and maintaining your IP500 device.
Image 1.1: The XTOOL IP500 OBD2 Scanner displaying its main interface with options for Auto Scan, Diagnosis, OBD II, Special Function, Updates, and More.
2. Persediaan dan Penggunaan Awal
- Buka bungkusan Peranti: Carefully remove the XTOOL IP500 scanner, USB to Type-C main cable, VGA to OBD2-16 main cable, and quick guide from the packaging.
- Hidupkan kuasa: The device includes a built-in 3150mAh lithium-ion battery. Ensure it is sufficiently charged using the Type-C cable and a compatible charger (not included).
- Sambung ke Kenderaan: Locate your vehicle's OBD2 port, typically under the dashboard on the driver's side. Connect the VGA to OBD2-16 main cable to the scanner and then to the vehicle's OBD2 port. Turn the vehicle's ignition to the ON position (engine off).
- Persediaan Awal: Follow the on-screen prompts to configure language, time zone, and Wi-Fi connection. A stable Wi-Fi connection is essential for software updates.
- Kemas Kini Perisian: Connect to Wi-Fi and navigate to the "Updates" section on the main menu. Perform any available system and vehicle software updates to ensure optimal performance and the latest vehicle compatibility. The device supports lifetime free Wi-Fi updates.
3. Arahan Operasi
3.1 Full Systems Diagnosis
The XTOOL IP500 provides comprehensive diagnostic capabilities across all vehicle systems, including engine, transmission, ABS, airbags, and more. This allows for accurate identification of Diagnostic Trouble Codes (DTCs) and monitoring of system status.
- From the main menu, select "Diagnosis" or "Auto Scan".
- The tool will automatically identify the vehicle's VIN (if supported) or prompt for manual selection of vehicle make, model, and year.
- Initiate a full system scan. The device will communicate with all accessible Electronic Control Units (ECUs) to retrieve fault codes and live data.
- Review the diagnostic report, which will display detected DTCs and their descriptions.
Image 3.1: The XTOOL IP500 connected to a vehicle, illustrating its capability to perform full system diagnostics across various components like engine, airbag, ABS, and transmission.
3.2 Kawalan Dwiarah (Ujian Aktif)
Bi-directional control allows the scanner to send commands to vehicle systems and components to test their functionality directly. This feature is crucial for efficient troubleshooting and verifying repairs.
- After selecting the vehicle, navigate to "Diagnosis" and then "System Selection".
- Choose the specific system (e.g., Engine, ABS, Body) you wish to test.
- Look for "Active Test" or "Bi-Directional Control" options.
- Select the component to test (e.g., fuel pump, window motor, headlight). The scanner will send a command, and you can observe the component's response.
Image 3.2: The XTOOL IP500 performing bi-directional control, showing the ability to send commands and receive feedback from components such as windows, mirrors, injectors, and headlights.
3.3 Special Functions (Reset Services)
The IP500 offers 21 unique reset and service functions tailored for Toyota, Lexus, and Scion vehicles. These functions assist in maintenance and repair tasks.
- Tetapan Semula EPB (Brek Parkir Elektronik)
- SAS Reset (Steering Angle Sensor)
- BMS Reset (Battery Management System)
- Set Semula Pendikit
- Pendarahan ABS
- Pengekodan Penyuntik
- Padanan Kotak Gear
- Pelarasan Penggantungan
- Pelarasan Lampu Depan
- A/F Reset (Air/Fuel Ratio)
- A/C Relearn (Air Conditioning)
- Clutch Adaption
- Imbangan Kuasa
- Crank Sensor Relearn
Note: Access these services via "Diagnose > Brand > System Selection > Special Function". Availability of specific functions may vary by vehicle model and year. Consult the device's internal database or XTOOL support for compatibility.
Image 3.3: The XTOOL IP500 interface showing icons for various reset services, including ABS Bleeding, BMS Reset, Throttle Matching, SAS Reset, EPB Reset, and Injector Coding.
3.4 Fungsi OBD2 Penuh
The IP500 includes all standard OBD2 functions for basic engine and emissions-related diagnostics, compatible with all OBD2 compliant vehicles.
- Baca DTC: Retrieve current, pending, and permanent diagnostic trouble codes.
- Kosongkan DTC: Erase diagnostic trouble codes and turn off the Check Engine Light (MIL).
- Data Langsung: View real-time operational parameters of the vehicle.
- Bingkai pegun: Capture a snapshot of vehicle conditions at the moment a fault code was set.
- Kesediaan Saya / M: Semak status monitor berkaitan pelepasan.
- Ujian Sensor O2: Retrieve O2 sensor monitoring test results.
- Ujian Monitor On-Board: Akses keputusan ujian pemantauan diagnostik terbina dalam untuk komponen/sistem tertentu.
- Ujian Komponen: Mulakan ujian kebocoran untuk sistem EVAP.
- Maklumat Kenderaan: Dapatkan nombor pengenalan kenderaan (VIN), ID penentukuran (CALID) dan nombor pengesahan penentukuran (CVN).
Image 3.4: The XTOOL IP500 showing its full OBD2 functions, including Vehicle Info, Read Codes, Clear Codes, Live Data, Freeze Frame, and O2 Monitor Test.
3.5 Multi-in-One Live Data Graph
The device can display multiple live data streams simultaneously in a graphical format, allowing for easy comparison and analysis of vehicle performance parameters. This helps in identifying intermittent issues and understanding system interactions.
- From the "Live Data" menu, select the parameters you wish to monitor.
- Choose the "Graph" display option to view selected data streams graphically.
- Analyze the trends and correlations between different parameters to diagnose issues.
Image 3.5: The XTOOL IP500 screen displaying a multi-in-one live data graph, showing real-time sensor readings and their trends over time for diagnostic analysis.
4. Penyelenggaraan
4.1 Kemas Kini Perisian
The XTOOL IP500 offers lifetime free software updates via Wi-Fi. Regularly updating the device ensures access to the latest vehicle models, diagnostic functions, and performance enhancements.
- Pastikan peranti disambungkan ke rangkaian Wi-Fi yang stabil.
- From the main menu, tap on "Updates".
- Select the available updates for system software and vehicle brands.
- Follow the on-screen instructions to download and install the updates. Do not power off the device during the update process.
4.2 Penjagaan Peranti
- Pastikan peranti bersih dan bebas daripada habuk dan lembapan.
- Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan.
- Elakkan daripada menjatuhkan peranti atau terkena impak yang kuat.
- Use only the provided cables or XTOOL-approved accessories.
5. Penyelesaian masalah
- Peranti Tidak Dihidupkan: Ensure the battery is charged. Connect the device to the vehicle's OBD2 port; the vehicle's power should activate the scanner.
- Tiada Komunikasi dengan Kenderaan:
- Verify the OBD2 cable is securely connected to both the scanner and the vehicle's port.
- Pastikan penyalaan kenderaan dalam kedudukan ON (enjin mati).
- Check if the vehicle is OBD2 compliant (most vehicles from 1996 onwards in the US).
- Try connecting to a different OBD2 compliant vehicle to rule out a scanner issue.
- Kegagalan Kemas Kini: Ensure a stable and strong Wi-Fi connection. Restart the device and attempt the update again. If issues persist, contact XTOOL technical support.
- Fungsi Khusus Tidak Berfungsi: Some special functions are vehicle-specific. Verify compatibility for your exact vehicle model and year. Contact XTOOL support for assistance.
- Prestasi Perlahan: Ensure the device has sufficient storage. Clear cache or unnecessary files if available. Perform a system update.
6. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | XTOOL |
| Model | IP500 for Toyota/Lexus/Scion |
| Sistem Operasi | Linux |
| Pemproses | 1.2GHz Dwi Teras |
| Paparan | 5.45-inch Touchscreen, 1440 * 720 Resolution |
| Memori Dalaman | 32GB (supports up to 128GB external memory, not included) |
| Bateri | 3150mAh Lithium Ion (termasuk) |
| Ketersambungan | Type-C (for charging), Wi-Fi |
| Berat Barang | 1.76 paun |
| Dimensi Pakej | 9.69 x 6.14 x 3.43 inci |
| Bahasa yang Disokong | English, French, Portuguese, Russian, Japanese, Korean, Italian, Arabic, Spanish, Polish, German, Finnish, Turkish, Vietnamese, Traditional Chinese |
7. Apa yang ada di dalam Kotak
- 1x XTOOL IP500 for Toyota OBD2 Scanner
- 1x USB to Type-C Main Cable
- 1x VGA to OBD2-16 Main Cable
- Panduan Pantas 1x
- 1x Package Listing
8. Keserasian
The XTOOL IP500 scanner is specifically designed to support 99% of models for Toyota, Lexus, and Scion vehicles. For specific model compatibility, it is recommended to consult XTOOL technical support with your vehicle's model, year, and desired features.
Image 8.1: Illustration showing three cars, representing the supported brands: Toyota, Lexus, and Scion, indicating broad compatibility for the XTOOL IP500.
9. Waranti dan Sokongan
XTOOL provides lifetime free software updates for the IP500 scanner. For technical assistance, compatibility inquiries, or troubleshooting, please contact XTOOL technical support. You can reach them via email at xtoolinplusus@outlook.com.
