SMALLRIG 4797-SR

SmallRig L-Shape Handgrip 4797 Instruction Manual

Model: 4797-SR | Brand: SMALLRIG

pengenalan

This manual provides instructions for the installation and use of the SmallRig L-Shape Handgrip 4797. This accessory is specifically designed to enhance the ergonomics and functionality of your Sony Alpha 7C II or Alpha 7CR camera, offering improved grip, stability, and versatile mounting options.

The handgrip integrates seamlessly with the camera body, maintaining access to essential functions such as the battery compartment, and features a built-in Arca-Swiss quick release plate for efficient transitions between handheld and tripod shooting.

Apa yang ada dalam Kotak

  • L-Shape Mount Plate x 1

The package includes one L-Shape Mount Plate. Please ensure all components are present upon unboxing.

SmallRig L-Shape Handgrip 4797 package contents and dimensions

Image: The L-Shape Mount Plate with its dimensions and a list of package contents.

Setup: Attaching the Handgrip

  1. Sediakan Kamera: Ensure your Sony Alpha 7C II or Alpha 7CR camera is powered off.
  2. Align the Grip: Position the SmallRig L-Shape Handgrip against the bottom of your camera, aligning the 1/4" screw hole on the grip with the tripod socket on the camera.
  3. Selamatkan Skru: Use the included flat screwdriver to tighten the 1/4" screw, securing the handgrip to the camera. An anti-twist pin is integrated to prevent rotation.
  4. Semak Fit: Verify that the handgrip is firmly attached and does not obstruct the battery compartment or other camera functions. The integrated rubber pad protects the camera from scratches.
SmallRig L-Shape Handgrip 4797 securely mounted to a Sony Alpha 7C camera, showing the 1/4 inch screw, protective silicone pads, and included flat-head wrench.

Imej: Terperinci view of the secure mounting mechanism, including the 1/4" screw, protective pads, and the flat screwdriver for installation.

Operating the Handgrip

Pengendalian Ergonomik

The handgrip features an ergonomic silicone handle designed to improve grip comfort and stability during prolonged shooting sessions. Its contoured shape reduces hand fatigue.

Close-up of the SmallRig L-Shape Handgrip 4797's integrated silicone handle with an upgraded concave design, blending perfectly with the camera body.

Image: Close-up of the integrated silicone handle, highlighting its ergonomic design and texture.

Pilihan Pemasangan Serbaguna

  • Plat Pelepasan Pantas Arca-Swiss: The base of the handgrip is equipped with a built-in Arca-Swiss quick release plate, allowing for rapid attachment and detachment from compatible tripods and support systems.
  • 1/4"-20 Threaded Hole: Additional 1/4"-20 threaded holes are available for attaching various accessories.
  • Strap Slot: A dedicated strap slot is included for attaching a wrist strap or neck strap, enhancing security and portability.
SmallRig L-Shape Handgrip 4797 demonstrating multiple mounting options: quick release plate for Arca-Swiss tripods, 1/4 inch-20 threaded hole, and a strap slot for wrist straps.

Image: The handgrip in use, showing its compatibility with Arca-type tripods and the strap slot for secure handling.

Penyelenggaraan

  • Pembersihan: Wipe the handgrip with a soft, dry cloth to remove dust and fingerprints. For stubborn dirt, a slightly damp kain boleh digunakan, diikuti dengan pengeringan segera. Elakkan bahan kimia yang keras atau bahan yang melelas.
  • Storan: Store the handgrip in a clean, dry environment away from extreme temperatures and direct sunlight when not in use.
  • Pemeriksaan: Periodically check the mounting screw for tightness to ensure the grip remains securely attached to your camera.

Menyelesaikan masalah

  • Grip feels loose: Ensure the 1/4" mounting screw is fully tightened using the provided flat screwdriver.
  • Battery compartment obstructed: Re-check the alignment during installation. The grip is designed to allow full access to the battery compartment. If obstruction occurs, detach and re-attach carefully.
  • Camera scratches: The handgrip includes a rubber pad to prevent scratches. Ensure this pad is clean and properly positioned during installation. If scratches occur, verify correct installation and contact support if issues persist.

Spesifikasi

Nombor Model4797-SR
KeserasianSony Alpha 7C II, Sony Alpha 7CR
Dimensi Produk125.4 x 69 x 60.1 mm (4.9 x 2.7 x 2.4 inci)
Berat Barang68 gram (2.4 auns)
BahanAloi Aluminium, Silikon
SmallRig L-Shape Handgrip 4797, highlighting its lightweight design at 86g / 3.0oz and reinforced 11mm / 0.43in aluminum alloy bracket.

Image: The handgrip showcasing its lightweight yet robust aluminum alloy construction.

Waranti dan Sokongan

SmallRig products typically come with a limited warranty against manufacturing defects. For specific warranty details, product support, or to report any issues, please refer to the official SmallRig webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda untuk tuntutan waranti.

SmallRig Rasmi Webtapak: www.smallrig.com

Dokumen Berkaitan - 4797-SR

Praview Plat Lekap SmallRig MD5423 untuk UdaraTag untuk Kamera Sony - Arahan Pengendalian
Arahan operasi terperinci untuk SmallRig MD5423 Arca-Swiss Mount Plate direka untuk kamera siri Sony Alpha dan FX, yang menampilkan Air bersepaduTag petak, sistem pelepasan cepat, dan pilihan pengembangan.
Praview SmallRig L-Shape Mount Plate for Sony Alpha 1 II / Alpha 9 III - Operating Instructions
Operating instructions for the SmallRig L-Shape Mount Plate designed for Sony Alpha 1 II and Alpha 9 III cameras. Includes installation steps, product specifications, and package contents.
Praview Plat Pemasangan Berbentuk L SmallRig dengan Pemegang Silikon untuk separuh FUJIFILM X - Arahan Pengendalian
Arahan pengendalian dan spesifikasi terperinci untuk Plat Pemasangan berbentuk L SmallRig dengan Pemegang Silikon, direka untuk kamera separuh FUJIFILM X. Termasuk kandungan pakej, panduan pemasangan, butiran produk dan maklumat pengilang.
Praview SmallRig Case untuk Sony Alpha 7 IV Arahan Pengendalian
Dokumen ini menyediakan arahan pengendalian dan panduan pemasangan untuk sangkar kamera SmallRig yang direka untuk Sony Alpha 7 IV. Ia memperincikan kandungan pakej, ciri produk, prosedur pemasangan langkah demi langkah dan spesifikasi teknikal.
Praview Plat Pemasangan Berbentuk L SmallRig dengan Pemegang Silikon untuk separuh FUJIFILM X - Arahan Pengendalian
Arahan pengendalian dan spesifikasi untuk Plat Pemasangan berbentuk L SmallRig dengan Pemegang Silikon yang direka untuk kamera separuh FUJIFILM X. Termasuk panduan pemasangan, butiran produk dan maklumat keserasian.
Praview Plat Lekap Bentuk L SmallRig dengan Pemegang Silikon untuk FUJIFILM X-M5 - Arahan Operasi
Arahan operasi terperinci dan spesifikasi produk untuk SmallRig L-Shape Mount Plate dengan Silicone Handle, direka untuk kamera FUJIFILM X-M5. Termasuk panduan pemasangan, kandungan pakej dan maklumat pengilang.