pengenalan
This manual provides essential information for the safe and proper use of your Moni i-Size Multi Infant Car Seat. Designed for infants from 40 to 87 cm in height (Group 0+), this car seat ensures maximum safety and comfort for your child. Please read these instructions carefully before use and keep them for future reference.
Maklumat Keselamatan Penting
- Always install the car seat rear-facing in the vehicle. This is the safest way for infants to travel.
- Ensure the 3-point safety harness is correctly fastened and adjusted to your child's size.
- Jangan sekali-kali meninggalkan anak anda tanpa pengawasan di tempat duduk kereta.
- Jangan gunakan tempat duduk kereta jika ia telah terlibat dalam kemalangan, walaupun tiada kerosakan yang boleh dilihat.
- Refer to your vehicle's owner's manual for specific car seat installation guidelines.
- The car seat is suitable for children from birth up to 13 kg.
Komponen Produk
The Moni i-Size Multi Infant Car Seat includes the following main components:
- Ergonomic carrying handle (3-position adjustable)
- Adjustable memory foam headrest
- Kanopi matahari boleh laras dan boleh tanggal
- 3-point safety harness with shoulder pads and lower buckle covers
- Soft full-body support cushion
- Sarung boleh tanggal dan boleh basuh
Image: Moni i-Size Multi Infant Car Seat with the footmuff attached, showing the overall design and carrying handle.
Image: Moni i-Size Multi Infant Car Seat without the footmuff, highlighting the internal padding and harness system.
Persediaan dan Pemasangan
This car seat is designed for rear-facing installation using the vehicle's 3-point seat belt.
Installing the Car Seat in Your Vehicle
- Place the car seat on the vehicle seat, ensuring it is positioned rear-facing.
- Route the vehicle's 3-point seat belt through the designated belt guides on the car seat. Refer to the labels on the car seat for correct routing.
- Fasten the vehicle's seat belt buckle.
- Pull the shoulder belt tightly to remove any slack, ensuring the car seat is securely fastened and does not move more than 1 inch (2.5 cm) from side to side or front to back at the belt path.
- Ensure the carrying handle is in the upright or designated travel position as per the instructions.
Imej: Sisi view of the car seat, illustrating the correct belt path for vehicle installation.
Menyelaraskan Headrest
The memory foam headrest is adjustable to accommodate your child's growth. Locate the adjustment mechanism (usually a lever or button at the back or top of the headrest) and slide the headrest up or down until it is at the correct height for your child's shoulders.
Imej: Jarak dekat view of the adjustable headrest and the 3-point harness system.
Arahan Operasi
Menjaga Anak Anda
- Letakkan anak anda di tempat duduk kereta.
- Gabungkan kedua-dua lidah gesper dan masukkannya ke dalam gesper sehingga anda mendengar bunyi klik.
- Pull the harness adjustment strap to tighten the harness until it is snug against your child's body. You should not be able to pinch any slack in the harness straps at the child's collarbone.
- Ensure the shoulder pads are positioned correctly over your child's shoulders.
Imej: Depan view of the car seat showing the 3-point harness system properly fastened.
Adjusting the Carrying Handle
The ergonomic carrying handle can be adjusted to 3 positions. Press the buttons on both sides of the handle simultaneously and rotate the handle to the desired position (carrying, stable base, or storage).
Image: Car seat with the carrying handle in the upright position, ready for transport.
Using the Sun Canopy
The sun canopy is adjustable and removable. Extend or retract the canopy as needed to protect your child from direct sunlight. To remove, detach it from its anchor points on the car seat frame.
Penyelenggaraan dan Penjagaan
Cleaning the Fabric Cover
The fabric cover is removable and washable.
- Tanggalkan penutup fabrik dari rangka tempat duduk kereta dengan berhati-hati.
- Wash the cover at 30 degrees Celsius (86 degrees Fahrenheit) using a mild detergent.
- Do not bleach, tumble dry, or iron the cover.
- Allow the cover to air dry completely before reattaching it to the car seat.
Membersihkan Bingkai
Wipe the plastic and metal parts of the car seat frame with a damp kain dan sabun lembut. Jangan gunakan pembersih atau pelarut yang melelas.
Menyelesaikan masalah
Car Seat Feels Loose After Installation
Ensure the vehicle's 3-point seat belt is routed correctly through all designated belt guides and pulled tightly. The car seat should not move more than 1 inch (2.5 cm) at the belt path. Re-read the installation instructions and consult your vehicle's manual.
Harness is Difficult to Adjust
Check for any twists in the harness straps. Ensure the harness adjustment strap is not obstructed. If the harness is still stiff, ensure the child is not leaning against the straps, which can create tension.
Buckle is Sticking
Clean the buckle area. Food crumbs or debris can cause sticking. Do not lubricate the buckle. If the issue persists, contact customer support.
Spesifikasi Produk
| Ciri | Perincian |
|---|---|
| Model | i-Size Multi |
| Umur Disyorkan | From birth |
| Kapasiti Berat | 0 hingga 13 kg |
| Height Capacity (Rear-facing) | 40 hingga 87 cm |
| Dimensi Produk (L x W x H) | 42 x 33 x 73 cm |
| Berat Produk | 3 kg |
| Komposisi Bahan | 100% Kain Poliester |
| Jenis Abah-abah | Abah-abah keselamatan 3 mata |
| Jenis Pemasangan | Vehicle 3-point seat belt (rear-facing) |
| Keserasian | Compatible with Moni Kali, Tokyo, Rio, Ciara, Rafaello strollers (strollers not included) |
Waranti dan Sokongan Pelanggan
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact Moni customer service. Keep your proof of purchase for any warranty claims.
For further assistance, please visit the official Moni webtapak atau hubungi talian sokongan pelanggan mereka.
