pengenalan
This manual provides essential information for the proper installation, operation, and maintenance of your ELCO Lighting Koto System 2" Deep Round Reflector Trim, model ELK2818W. This product is designed to enhance the aesthetic and functional aspects of your recessed lighting fixtures by providing a clean, finished look and optimizing light distribution. Please read this manual thoroughly before installation and retain it for future reference.
Maklumat Keselamatan
Sentiasa patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada produk:
- AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum memasang atau menservis.
- Installation must be performed by a qualified electrician in accordance with all applicable electrical codes.
- Ensure the product is compatible with your existing recessed housing before installation.
- Jangan ubah suai produk dalam apa jua cara. Sebarang pengubahsuaian boleh membatalkan jaminan dan mewujudkan bahaya keselamatan.
- Handle the trim with care to avoid bending or damaging the reflector surface.
- Jauhkan bahan pembungkusan daripada kanak-kanak.
Kandungan Pakej
Verify that all components are present and undamaged upon opening the package. If any parts are missing or damaged, contact ELCO Lighting customer support immediately.
- 1 x ELCO Lighting Koto System 2" Deep Round Reflector Trim (Model: ELK2818W)

Image: The ELCO Lighting Koto System 2" Deep Round Reflector Trim, white in color, featuring a smooth, round design with mounting clips visible on the sides. This image shows the complete trim unit.
Persediaan dan Pemasangan
Follow these steps for proper installation of the reflector trim:
- Matikan Kuasa: Before beginning any installation, ensure the power to the recessed lighting circuit is turned off at the circuit breaker or fuse box. Verify power is off using a voltage penguji.
- Sediakan Perumahan: Ensure the recessed housing is properly installed and wired according to local electrical codes. The trim is designed for 2-inch recessed housings.
- Insert Trim: Carefully align the trim with the opening of the recessed housing. The spring clips or torsion springs (if applicable) on the trim should align with the corresponding slots or brackets inside the housing.
- Trim Selamat: Gently push the trim upwards into the housing until the spring clips or torsion springs engage and hold the trim firmly in place against the ceiling. Ensure the trim is flush with the ceiling surface.
- Pulihkan Kuasa: Once the trim is securely installed, restore power to the circuit at the breaker or fuse box.
- Ujian: Hidupkan suis lampu untuk mengesahkan operasi yang betul.
Nota: Specific installation methods may vary slightly depending on the type of recessed housing used. Refer to your recessed housing's instructions for detailed compatibility and installation requirements.
Arahan Operasi
The ELCO Koto System Reflector Trim is a passive component designed to work in conjunction with a compatible recessed lighting fixture. Once installed, its primary function is to provide a finished appearance and to help direct the light from the lamp. There are no operational controls on the trim itself.
- The trim will function automatically when the light source within the recessed housing is activated.
- The deep reflector design helps to minimize glare and provide a more focused light output.
Penyelenggaraan
The ELCO Koto System Reflector Trim requires minimal maintenance. Follow these guidelines to keep your trim in optimal condition:
- Pembersihan: To clean the trim, ensure the power to the fixture is off. Use a soft, dry, or slightly damp kain. Jangan gunakan pembersih, pelarut atau pengilat yang melelas, kerana ini boleh merosakkan kemasan.
- Pemeriksaan: Periodically inspect the trim for any signs of damage or loosening. If any issues are observed, turn off power and address them promptly.
Menyelesaikan masalah
If you encounter issues with your ELCO Koto System Reflector Trim, consider the following common solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Trim does not fit into housing. | Incorrect trim size or incompatible housing. | Verify the trim size (2-inch) matches your recessed housing. Consult the housing's specifications. |
| Trim is loose or falls out. | Spring clips/torsion springs not properly engaged or damaged. | Ensure clips are fully engaged. If damaged, contact customer support for replacement or professional assistance. |
| Light output is poor (not related to bulb). | Reflector surface is dirty or damaged. | Clean the reflector surface as per maintenance instructions. If damaged, replacement may be necessary. |
If the problem persists after attempting these solutions, please contact ELCO Lighting customer support.
Spesifikasi
| Atribut | Perincian |
|---|---|
| Jenama | Pencahayaan ELCO |
| Nombor Model | ELK2818W |
| Gaya | The Koto System |
| Saiz Potong | 2 inci |
| warna | putih |
| bahan | Tembaga |
| Dimensi Produk (L x W x H) | 3.5 x 3.5 x 1.5 inci |
| Berat Barang | 6.4 auns |
| Sumber Kuasa | Corded Electric (refers to the system it integrates with) |
| Jenis Pemasangan | Lekapan Siling Tersembunyi |
| UPC | 633999213740 |
| Tarikh Mula-mula Tersedia | 3 September 2023 |
Maklumat Waranti
The ELCO Lighting Koto System 2" Deep Round Reflector Trim (ELK2818W) is covered by ELCO Lighting's Waranti terhad 5 tahun. This warranty covers defects in materials and workmanship under normal use and service. For full details regarding warranty terms, conditions, and limitations, please refer to the official ELCO Lighting warranty statement available on their webtapak atau hubungi sokongan pelanggan.
Sokongan Pelanggan
For technical assistance, warranty claims, or any questions regarding your ELCO Lighting product, please contact ELCO Lighting customer support:
- Webtapak: Visit the official ELCO Lighting website for FAQs, product documentation, and contact forms. (e.g., www.elcolighting.com)
- telefon: Refer to the ELCO Lighting weblaman web untuk nombor telefon khidmat pelanggan semasa.
When contacting support, please have your product model number (ELK2818W) and purchase date available.





