Manual Pengguna Sistem Komunikasi Fon Kepala Bluetooth Motosikal Sena 10S

1. Produk Lebihview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Ciri-ciri Utama:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Rajah 1.1: Depan view of the Sena 10S Motorcycle Bluetooth Headset.

2. Kandungan Pakej

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Set Pembesar suara
• Mikrofon Boom
• Mikrofon Berwayar
• Pemasangan Clamp Kit
• Kuasa USB & Kabel Data
• Kabel Audio
• Pad Velcro untuk Pembesar Suara
• Span Mikrofon

Figure 2.1: All components included in the Sena 10S package.

3. Persediaan dan Pemasangan

3.1 Mengecas Peranti

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Rajah 3.1: Sisi view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Longgarkan skru di bahagian belakang clamp unit.
2. Luncurkan clamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Tighten the screws to secure the clamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Arahan Operasi

4.1 Hidupkan/Mati Kuasa

• Hidupkan kuasa: Press and hold the Phone Button and the Jog Dial for 1 second.
• Matikan: Tap the Phone Button and the Jog Dial simultaneously.

4.2 Kawalan Kelantangan

Putar Dail Jog mengikut arah jam untuk meningkatkan kelantangan dan lawan arah jam untuk mengurangkan kelantangan.

4.3 Berpasangan Bluetooth (Telefon Pintar)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Komunikasi Interkom

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Main/Jeda Muzik: Tekan dan tahan Jog Dial selama 1 saat.
• Jawab/Tamatkan Panggilan: Ketik Butang Telefon.
• Dail Suara: Tekan dan tahan Butang Telefon selama 3 saat.

5. Penyelenggaraan dan Penjagaan

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Pastikan peranti kering. Kelembapan boleh merosakkan litar dalaman.
• Jangan gunakan bahan kimia yang keras, pelarut pembersih atau detergen yang kuat untuk membersihkan peranti.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan.
• Cas bateri dengan kerap, walaupun tidak digunakan, untuk mengekalkan kesihatan bateri.

6. Penyelesaian masalah

If you encounter issues with your Sena 10S, try the following steps:

• Tiada Kuasa: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Tiada Bunyi/Kelantangan Rendah: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Interkom Tidak Bersambung: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Pemutusan sambungan Bluetooth: Ensure your paired device is within range. Try re-pairing the device.
• Menetapkan semula Peranti: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Spesifikasi Teknikal

8. Video Produk Rasmi

9. Waranti dan Sokongan

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.