Renogy 24V 3000W All-in-One Hybrid Solar Inverter Instruction Manual

1. Pengenalan

The Renogy All-in-One Hybrid Solar Inverter integrates a 24V 3000W inverter, an 80A AC charger, and an 80A MPPT charge controller. It features high-efficiency MPPT technology (up to 99.9%) for maximum solar energy harvesting. With four charging modes and three output modes, it caters to diverse power needs. Comprehensive electronic protection functions ensure system safety and stability.

Rajah 1: Renogy 24V 3000W All-in-One Hybrid Solar Inverter with key specifications and dimensions. This image displays the Renogy 24V 3000W All-in-One Hybrid Solar Inverter, highlighting its 3300W pure sine wave output, 80A MPPT solar charge controller, and 80A maximum AC charger. The dimensions are shown as 378 mm (height), 280 mm (width), and 103 mm (depth).

2. Maklumat Keselamatan

Please read all instructions and warnings carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, severe injury, or death. Keep this manual for future reference.

• Pemasangan mesti dilakukan oleh kakitangan yang berkelayakan.
• Ensure all wiring is correctly sized and properly connected.
• Do not disassemble or attempt to repair the unit yourself. Contact qualified service personnel.
• Keep the unit away from water, flammable materials, and corrosive substances.
• Ensure adequate ventilation around the inverter to prevent overheating.
• Always disconnect power sources before performing any maintenance or wiring.

3. Ciri-ciri Produk

• All-in-One Hybrid Solar Solution: This system combines solar power and AC power input. It integrates an 80A MPPT solar charge controller, an AC/generator battery charger, and a battery inverter, providing a comprehensive solution for off-grid systems and Uninterruptible Power Supply (UPS) functionality.
• Keserasian Bateri Universal: Supports various battery types including AGM/Sealed, Gel, Lead-Acid, and Lithium, with a customizable user mode for optimal performance.
• Reliable Pure Sine Wave Output: Built on a fully digital intelligent design, the DC-AC inverter module utilizes advanced SPWM technology to produce a pure sine wave output, ensuring stable and clean power for sensitive electronics.
• Four Charging Modes: Offers four selectable charging modes: Solar Only, Mains Power Priority, Solar Priority, and Hybrid (Mains & Solar) Charging.
• Fungsi Bekalan Kuasa Tidak Terputus (UPS): Features an integrated UPS function, allowing the device to seamlessly switch to battery power during a grid outage, preventing interruptions to connected computers and other critical appliances.

4. Persediaan dan Pemasangan

Proper installation is crucial for the safe and efficient operation of your Renogy Hybrid Solar Inverter. Refer to the diagrams below for connection details.

Rajah 2: Selesai Sistemview. This diagram shows how the Renogy Hybrid Solar Inverter integrates into a complete system. It depicts solar charging from PV panels, AC/grid charging, 24V battery storage, and AC output to various household appliances like refrigerators, lights, TVs, and fans. This illustrates the inverter's role in managing power flow from multiple sources to loads.

4.1 Port Sambungan

Identify the various connection points on the back panel of the inverter as shown in Figure 3.

Rajah 3: Back Panel Connections. This image provides a detailed view of the inverter's rear panel, clearly labeling all connection ports and controls. These include: 1. AC Input, 2. AC Output, 3. CAN Communication, 4. USB Communication, 5. RS485 Communication, 6. Dry Contact, 7. Grounding Terminal, 8. Overload Protection, 9. Fan, 10. Battery Connection, 11. Fan, 12. ON/OFF Rocker Switch, 13. PV Connection, 14. Touch Buttons, 15. LED Indicators, and 16. LCD Screen. This visual guide is essential for proper installation and wiring.

4.2 Sambungan Bateri

The inverter supports various battery types. Ensure your battery type is correctly configured in the settings for optimal charging and discharge performance.

Rajah 4: Battery Compatibility. This image highlights the inverter's compatibility with different battery types, including Flooded (FLD), GEL, Lithium Iron Phosphate, Lithium-ion, AGM/Sealed (SLD), and a customizable User-defined battery mode. This versatility ensures the inverter can be integrated into a wide range of solar power systems.

• Connect the battery cables to the Battery Connection terminals (10) on the inverter. Observe correct polarity.
• Pastikan bateri voltage matches the inverter's operating voltage (24V).

4.3 PV (Solar Panel) Connection

• Connect your solar panel array to the PV Connection terminals (13).
• Ensure the open-circuit voltage and short-circuit current of your solar array are within the inverter's specifications.

4.4 Sambungan Input/Output AC

• Connect the AC grid power to the AC Input Connection (1).
• Connect your AC loads to the AC Output Connection (2).
• Ensure all AC wiring is properly grounded and protected by circuit breakers.

5. Arahan Operasi

The inverter features an intuitive LCD display and various operating modes to suit your power needs.

5.1 Paparan dan Penunjuk LCD

The LCD screen (16) and LED indicators (15) provide real-time status and information about the system.

Rajah 5: LCD Display and LED Indicators. A detailed view of the inverter's dynamic LCD display and intelligent LED indicators. The LCD provides critical system information such as input/output data, load status, and battery voltage. The LEDs indicate AC/Inverter status, Charge status, and Fault conditions, allowing for quick identification of operational status and potential issues.

5.2 Mod Pengecasan dan Output

Select the appropriate charging and output modes using the touch buttons (14) on the control panel.

Rajah 6: Charging and Output Modes. This diagram illustrates the four available charging modes: PV Priority, Grid Priority, Hybrid Charging, and Solar Only. It also shows three output modes: PV Priority, Grid Priority, and Inverter Priority. These modes allow users to select the most suitable power management strategy for their system.

Mod Pengecasan:

• Solar Sahaja: Mengutamakan kuasa solar untuk pengecasan bateri.
• Mains Power Priority: Prioritizes AC grid power for battery charging.
• Keutamaan Suria: Mengutamakan kuasa solar untuk mengecas dan membekalkan beban.
• Hybrid (Mains & Solar) Charging: Uses both solar and grid power for charging as needed.

Mod Output:

• Keutamaan PV: Mengutamakan kuasa solar untuk beban.
• Grid Priority: Prioritizes AC grid power for loads.
• Inverter Priority: Prioritizes battery power (via inverter) for loads.

6. Penyelenggaraan

Penyelenggaraan berkala memastikan jangka hayat dan prestasi optimum inverter anda.

• Pembersihan: Keep the inverter's exterior clean and free from dust. Ensure ventilation openings are not blocked.
• Sambungan: Periksa semua sambungan elektrik secara berkala untuk kesesakan dan kakisan.
• Persekitaran: Ensure the inverter is operating within its specified temperature and humidity ranges.
• Kesihatan Bateri: Pantau bateri voltage dan kesihatan mengikut garis panduan pengeluar bateri.

7. Penyelesaian masalah

If you encounter issues, refer to the following common troubleshooting steps. For persistent problems, contact Renogy customer support.

8. Spesifikasi

Key technical specifications for the Renogy 24V 3000W All-in-One Hybrid Solar Inverter.

9. Waranti dan Sokongan

Renogy products are designed for reliability and performance. For warranty information, product registration, or technical support, please visit the official Renogy webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

• rasmi Webtapak: www.renogy.com
• Sokongan Pelanggan: Rujuk bahagian hubungan pada pegawai weblaman web untuk nombor telefon atau sokongan e-mel.