1. Pengenalan
The ELEGOO Mars Mate Air Purifier is specifically designed for 3D printing environments, particularly for resin-based 3D printers. It effectively purifies the air by absorbing formaldehyde and reducing odors associated with 3D printing, ensuring a cleaner workspace. This manual provides essential information for the safe and efficient use of your Mars Mate Air Purifier.
Image 1.1: The Mars Mate Air Purifier is compatible with a wide range of 3D printers, including the Saturn 3 Ultra and Mars 4 Ultra.
2. Maklumat Keselamatan
Please read all safety instructions before operating the device to prevent injury or damage.
- Do not operate the purifier with a damaged power cord or plug.
- Keep the device away from water or other liquids. Do not immerse the unit.
- Ensure proper ventilation around the unit; do not block air inlets or outlets.
- Jangan masukkan objek ke dalam sebarang bukaan.
- Cabut palam peranti sebelum membersihkan atau melakukan sebarang penyelenggaraan.
- Perkakas ini tidak dimaksudkan untuk digunakan oleh orang (termasuk kanak-kanak) yang kurang keupayaan fizikal, deria atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka.
3. Persediaan
- Unpack the Purifier: Carefully remove the Mars Mate Air Purifier from its packaging. Retain packaging for future transport or storage.
- penempatan: Place the purifier on a stable, flat surface near your 3D printer. Ensure there is adequate space around the unit for proper airflow. The purifier is designed to integrate seamlessly into your 3D printing setup.
- Sambungan Kuasa: Connect the power adapter to the purifier and then plug it into a suitable power outlet.
- Semakan Penapis: Ensure the activated carbon filter is correctly installed inside the unit. Refer to the Maintenance section for filter installation details if needed.
Image 3.1: The Mars Mate Air Purifier is designed for integration with 3D printers, such as the ELEGOO Saturn 3.
4. Arahan Operasi
The Mars Mate Air Purifier features a simple control panel for easy operation.
- Hidupkan/Mati Kuasa: Tekan ke Hidup/Mati button to turn the purifier on or off. The indicator light will illuminate when the unit is active.
- Pemilihan Mod: Tekan ke Auto/Speed button to cycle through different operating modes. The purifier may offer an automatic mode that adjusts fan speed based on air quality, and manual speed settings.
- Penetapan Semula Penapis: Selepas memasang semula penapis, tekan dan tahan Penapis button for a few seconds to reset the filter life indicator. This ensures accurate tracking of filter usage.
Image 4.1: Control panel of the Mars Mate Air Purifier, highlighting the filter reset button.
5. Penyelenggaraan
Regular maintenance ensures optimal performance and longevity of your Mars Mate Air Purifier.
- Penggantian Penapis: The activated carbon filter should be replaced approximately every 2 months, depending on usage and air quality. To replace the filter:
- Unplug the purifier from the power outlet.
- Locate the filter compartment, typically at the base or side of the unit.
- Open the compartment and carefully remove the used filter.
- Insert a new ELEGOO Mars Mate activated carbon filter, ensuring it is seated correctly.
- Close the filter compartment and plug the purifier back in.
- Perform a filter reset as described in the Operating Instructions.
- Membersihkan Unit: Wipe the exterior of the purifier with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
Image 5.1: The internal activated carbon filter is crucial for efficient purification.
6. Penyelesaian masalah
If you encounter issues with your Mars Mate Air Purifier, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Purifier does not turn on | Tiada bekalan kuasa; Kord kuasa tidak disambung dengan betul | Periksa salur keluar kuasa; Pastikan kord kuasa dipasang dengan selamat. |
| Poor odor reduction | Filter is old or clogged; Incorrect filter installation | Replace the activated carbon filter; Ensure filter is installed correctly. |
| Bunyi luar biasa semasa operasi | Halangan dalam kipas; Unit tidak berada di atas permukaan yang stabil | Unplug and check for obstructions; Place on a stable, flat surface. |
7. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | ELEGOO |
| Nombor Model | US-SO-3D-CP1 |
| Dimensi Produk | 33 x 29 x 48 cm |
| Berat Barang | 6.35 Kilogram |
| Kuasa / Wattage | 6 watt |
| Tahap Kebisingan | 35 Desibel |
| Jenis Penapis | Karbon Teraktif |
| Kadar Pemurnian | Up to 95% (for formaldehyde and odors) |
| bahan | Anti-oxidation ABS |
Image 7.1: Physical dimensions of the Mars Mate Air Purifier.
Image 7.2: The Mars Mate Air Purifier operates with ultra-low power consumption of 6 watts.
8. Waranti dan Sokongan
For warranty information and technical support, please refer to the official ELEGOO website or contact ELEGOO customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
