pengenalan
This manual provides instructions for the setup, operation, and maintenance of your PDP REMATCH Enhanced Wired Controller. This controller is officially licensed for use with Nintendo Switch, Nintendo Switch Lite, and Nintendo Switch - OLED Model consoles.
Image: The PDP REMATCH Enhanced Wired Controller, showcasing its official Nintendo licensing and Super Mario Kart Racers design.
Kandungan Pakej
- PDP REMATCH Enhanced Wired Controller
- Integrated 10-foot USB Cable
- Manual Arahan (dokumen ini)
Persediaan
Menyambungkan Pengawal
- Pastikan konsol Nintendo Switch anda dihidupkan dan dikemas kini kepada perisian sistem terkini.
- Locate an available USB port on your Nintendo Switch dock. If using a Nintendo Switch Lite or Switch - OLED Model in handheld mode, you may need a USB-C to USB-A adapter (not included).
- Plug the USB connector of the controller's integrated 10-foot cable into the USB port on your Nintendo Switch dock or adapter.
- The controller will automatically be recognized by your Nintendo Switch. The LED indicator on the controller will illuminate to confirm connection.
- You can now use the controller for gameplay.
Image: The PDP REMATCH Enhanced Wired Controller, ready for connection via its integrated USB cable.
Arahan Operasi
Kawalan Asas
The PDP REMATCH Enhanced Wired Controller features standard Nintendo Switch button layouts, including A, B, X, Y buttons, directional pad, left and right analog sticks, L/R and ZL/ZR shoulder buttons, and Plus/Minus/Home/Capture buttons.
Butang Belakang Boleh Aturcara
The controller includes dual programmable back buttons for customized gameplay. These buttons can be mapped to replicate any other button on the controller for quicker responses during gameplay.
- Kepada Program: Press and hold the 'Function' button (usually a small button on the back or bottom of the controller) and the back button you wish to program simultaneously.
- While holding, press the button you want to map to the back button (e.g., 'A' button).
- Release all buttons. The back button is now programmed.
- Repeat for the other back button if desired.
Image: The programmable back buttons located on the underside of the controller, designed for quick access and customization.
Ciri Audio
The controller is equipped with a 3.5mm audio jack for connecting a headset, allowing for in-game audio and USB-chat in supported titles.
Image: The 3.5mm audio jack on the controller, demonstrating its use for connecting a headset.
On-Board Audio Controls
Easily adjust your game volume directly from the controller using the D-pad. Specific instructions for volume adjustment may vary slightly by game or system settings, but generally involve holding a function button and pressing up/down on the D-pad.
Image: A close-up of the D-pad, highlighting its role in quickly adjusting audio levels during gameplay.
Reka Bentuk Ergonomik
The controller is designed for comfort during extended gaming sessions, featuring an ergonomic shape that fits naturally in your hands.
Image: The ergonomic design of the controller, shaped for comfortable handling during gameplay.
Image: A user holding the controller, demonstrating its comfortable fit during active use.
Penyelenggaraan
Untuk memastikan jangka hayat dan prestasi optimum pengawal anda, ikuti garis panduan penyelenggaraan ini:
- Pembersihan: Gunakan kain lembut dan kering untuk mengelap pengawal. Untuk kotoran degil, sedikit dampen kain dengan air. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.
- Storan: Simpan pengawal di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
- Penjagaan Kabel: Do not sharply bend or pull on the USB cable. Always grasp the plug when disconnecting it from the console.
- Elakkan Cecair: Jauhkan pengawal daripada cecair untuk mengelakkan kerosakan dalaman.
Menyelesaikan masalah
If you encounter issues with your controller, refer to the following common solutions:
- Pengawal Tidak Menjawab:
- Ensure the USB cable is securely plugged into both the controller and the Nintendo Switch dock/adapter.
- Try plugging the controller into a different USB port on the dock.
- Mulakan semula konsol Nintendo Switch anda.
- Audio Issues (No Sound/Chat):
- Verify your headset is fully plugged into the 3.5mm audio jack on the controller.
- Check the in-game audio settings and your Nintendo Switch system audio settings to ensure output is directed to the headset.
- Adjust the volume using the on-board D-pad controls.
- Uji alat dengar dengan peranti lain untuk mengesahkan ia berfungsi dengan betul.
- Butang Boleh Atur Cara Tidak Berfungsi:
- Re-program the back buttons following the instructions in the 'Operating Instructions' section.
- Ensure you are pressing the correct buttons during the programming sequence.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | 500-134-MKRS |
| Ketersambungan | USB berwayar |
| Panjang Kabel | 10 kaki (3 meter) |
| Keserasian | Nintendo Switch, Switch Lite, Switch - OLED Model |
| Port Audio | Bicu Alat dengar 3.5mm |
| Butang Boleh Aturcara | Dual Back Buttons |
| Dimensi Produk | 6.22 x 5.87 x 3.07 inci |
| Berat Barang | 0.014 auns |
| Pengeluar | PDP |
Waranti dan Sokongan
Untuk maklumat jaminan dan sokongan pelanggan, sila rujuk PDP rasmi webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk tuntutan waranti.
Sokongan dalam talian: melawat www.pdp.com/support untuk Soalan Lazim, panduan penyelesaian masalah dan pilihan hubungan.
