1. Pengenalan
The XTOOL KC501 is an advanced key and chip programmer designed to work in conjunction with various XTOOL diagnostic tools. It provides comprehensive functions for key programming, chip reading and writing, and other related automotive immobilizer services. This manual provides instructions for the proper setup, operation, and maintenance of your KC501 device.
2. Produk Lebihview
The KC501 extends the capabilities of compatible XTOOL diagnostic tools by offering specialized functions for vehicle key systems. Its primary features include:
- Key programming for various vehicle makes, including Volvo and Mercedes-Benz.
- Compatibility with XTOOL KS-1 for additional functions, such as supporting Toyota/Lexus/Scion A_K_L.
- Support for a wide range of XTOOL diagnostic tools, including D8/D8BT, D8S/D8W, X100 PAD3/X100 PAD3 SE, X100 PADS, IK618, A80/A80 PRO/A80 PRO MASTER, D9/D9 PRO, and D9S/D9S RO.
Image 2.1: The XTOOL KC501 Advanced Key Programmer shown with its protective carrying case. The programmer unit features various chip sockets and control buttons.
3. Persediaan dan Sambungan
The KC501 is designed to work as an accessory to a compatible XTOOL diagnostic tool. Follow these steps for initial setup:
- Membongkar: Carefully remove the KC501 unit and all accessories from its packaging.
- Connection to Diagnostic Tool: Connect the KC501 to your XTOOL diagnostic device (e.g., D8, D9, X100 PAD3) using the provided USB cable. Ensure a secure connection.
- Hidupkan kuasa: Power on your XTOOL diagnostic tool. The KC501 will draw power from the diagnostic tool.
- Pengecaman Perisian: The diagnostic tool should automatically detect the connected KC501. If prompted, allow the diagnostic tool to install any necessary drivers or software components for the KC501.
For specific connection diagrams or adapter usage, refer to the documentation provided with your primary XTOOL diagnostic tool.
4. Arahan Operasi
Once connected and recognized by your XTOOL diagnostic tool, the KC501's functions will be accessible through the diagnostic tool's interface. The exact steps may vary depending on the specific diagnostic tool and the vehicle/key type.
4.1. Pengaturcaraan Utama
To perform key programming, navigate to the "Key Programming" or "Immobilizer" section within your XTOOL diagnostic tool's software. Follow the on-screen prompts, which will guide you through the process, often involving:
- Selecting the vehicle make, model, and year.
- Identifying the type of key or chip to be programmed.
- Inserting the key or chip into the appropriate slot on the KC501.
- Following instructions for ignition cycles, security code entry, or other vehicle-specific procedures.
The KC501 supports key programming for various systems, including those found in Volvo and Mercedes-Benz vehicles.
4.2. Working with XTOOL KS-1
When combined with the XTOOL KS-1, the KC501 can expand its capabilities to support additional vehicle systems, such as Toyota/Lexus/Scion A_K_L. Ensure the KS-1 is properly connected according to its own instructions and recognized by your diagnostic tool before attempting these advanced functions.
Note: Not all vehicles are supported. Always verify compatibility with specific VINs before attempting key programming procedures.
5. Penyelenggaraan dan Kemas Kini
Keeping your KC501 software updated ensures access to the latest vehicle coverage, features, and bug fixes.
5.1. Kemas Kini Perisian
The KC501's software is updated through its connection to a compatible XTOOL diagnostic tool or a PC.
- Via XTOOL Diagnostic Tool: When the KC501 is connected to an XTOOL diagnostic tool, the tool will automatically detect the KC501's software version. If an update is available, the diagnostic tool will prompt you to update to the latest version. Follow the on-screen instructions to complete the update.
- Melalui PC: You can also connect the KC501 to a PC using a USB cable. The PC software (if provided by XTOOL) will automatically detect the device and check for updates.
Always ensure a stable internet connection during the update process to prevent data corruption.
5.2. Pembersihan dan Penyimpanan
- Pastikan peranti bersih dan bebas daripada habuk dan serpihan. Gunakan kain lembut dan kering untuk pembersihan.
- Store the KC501 in its protective case when not in use to prevent damage.
- Elakkan daripada mendedahkan peranti kepada suhu yang melampau, kelembapan atau cahaya matahari langsung.
6. Penyelesaian masalah
If you encounter issues with your XTOOL KC501, consider the following troubleshooting steps:
- Peranti Tidak Dikenali:
- Ensure the USB cable is securely connected to both the KC501 and the diagnostic tool/PC.
- Cuba port USB atau kabel lain.
- Restart both the KC501 (by disconnecting and reconnecting) and the diagnostic tool/PC.
- Verify that the diagnostic tool's software is up to date.
- Key Programming Failure:
- Confirm that the vehicle and key type are supported by the KC501 and your diagnostic tool.
- Ensure the key or chip is correctly inserted into the KC501's slot.
- Follow all on-screen instructions precisely.
- Periksa volum bateri kenderaantage; vol rendahtage can interfere with programming.
- Isu Kemas Kini Perisian:
- Pastikan sambungan internet stabil.
- Temporarily disable any antivirus or firewall software that might interfere with the update process.
- If updating via PC, ensure the correct XTOOL update software is installed and running.
If problems persist, contact XTOOL technical support for further assistance.
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | XD-KC501 |
| Jenama | XTOOL |
| Berat Barang | 6.91 paun |
| Dimensi Produk | 15.2 x 4.2 x 12.5 inci |
| Ciri Khas | Memory (likely for chip data storage) |
| Operating System (for compatible PC software) | Windows XP (as per product data, may support newer OS) |
| UPC | 753124715649 |
8. Waranti dan Sokongan Teknikal
XTOOL provides technical support for its products. For assistance with your KC501, including technical consultations or troubleshooting beyond this manual, please refer to the official XTOOL webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung.
Information regarding product warranties and extended protection plans may be available through your point of purchase or the official XTOOL channels. For example, protection plans such as a 4-Year Protection Plan may be offered by retailers.
Sentiasa simpan bukti pembelian anda untuk tuntutan waranti.
