1. Pengenalan
This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Kandungan Pakej
The Parani M10 package typically includes the following components:
- Parani M10 Main Unit
- Mikrofon Boom Berwayar
- Speakers (pair)
- Topi keledar Clamp Kit
- Kabel Pengecas USB
- Pad Pembesar Suara
- Pengikat Cangkuk dan Gelung untuk Pembesar Suara
- Manual Pengguna (dokumen ini)
Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.
3. Produk Lebihview
Familiarize yourself with the main unit's components and controls.
Figure 3.1: Parani M10 Main Unit Controls and Ports.
- Dail Jog: Used for volume control, menu navigation, and various functions.
- Butang pelbagai fungsi: Primary button for power, pairing, and call management.
- Paparan LCD: Shows battery status, volume level, intercom pairing status, and other operational information.
- Pengecasan Kuasa DC & Port Peningkatan Perisian Tegar: For charging the device and updating its firmware.
- Speakers and Microphone Port: Connection point for the wired speakers and microphone.
4. Persediaan dan Pemasangan
The Parani M10 is designed for easy installation on most motorcycle helmets.
4.1 Attaching the Main Unit to the Helmet
- Choose a suitable location on the left side of your helmet for the clamp kit.
- Loosen the screws on the helmet clamp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
- Slide the Parani M10 main unit onto the clamp sehingga ia klik pada tempatnya.
Figure 4.1: Parani M10 unit installed on a helmet.
4.2 Memasang Pembesar Suara dan Mikrofon
- Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
- Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
- Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
- Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
- Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.
4.3 Mengecas Peranti
Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.
5. Arahan Operasi
5.1 Hidupkan/Mati Kuasa
- Hidupkan kuasa: Tekan dan tahan Butang Pelbagai fungsi selama 1 saat.
- Matikan: Tekan dan tahan Butang Pelbagai fungsi selama 5 saat.
5.2 Kawalan Kelantangan
Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.
Figure 5.1: LCD display showing pairing status and volume.
5.3 Smartphone Pairing
- With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
- On your smartphone, go to Bluetooth settings and search for new devices.
- Select "Parani M10" from the list of available devices.
- Once paired, the LED will flash blue, and the LCD will confirm connection.
- You can now listen to music, GPS navigation, and make/receive phone calls through your headset.
5.4 Interkom Bluetooth
The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.
- Interkom Berpasangan:
- Ensure both M10 units are powered on.
- On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- The units will automatically search and pair. Once paired, the LED will flash blue.
- Repeat this process for additional units (up to four total).
- Starting/Ending Intercom Conversation:
- To start an intercom conversation, tap the Jog Dial.
- To end an intercom conversation, tap the Jog Dial again.
5.5 Panggilan Telefon
- Jawab Panggilan: Ketik Butang Berbilang fungsi.
- Tamatkan Panggilan: Ketik Butang Berbilang fungsi.
- Tolak Panggilan: Tekan dan tahan Butang Pelbagai fungsi selama 2 saat.
- Dail Suara: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).
6. Penyelenggaraan
6.1 Pembersihan
Lap unit utama dengan lembut, damp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.
6.2 Penjagaan Bateri
- Cas peranti secara berkala, walaupun tidak digunakan, untuk mengekalkan kesihatan bateri.
- Avoid storing the device in extreme temperatures.
- Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.
6.3 Kemas Kini Perisian Tegar
Periksa Sena secara berkala website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Peranti tidak dihidupkan. | Bateri lemah. | Cas peranti sepenuhnya. |
| Tidak boleh berpasangan dengan telefon pintar. | Device not in pairing mode; smartphone Bluetooth off; interference. | Ensure M10 is in pairing mode (red/blue flashing LED). Turn smartphone Bluetooth off and on. Move away from other Bluetooth devices. |
| Interkom tidak bersambung. | Units not in intercom pairing mode; out of range; already connected to other devices. | Ensure both M10 units are in intercom pairing mode. Reduce distance between units. Disconnect from other Bluetooth devices before intercom pairing. |
| Tiada audio daripada pembesar suara. | Volume too low; speakers not connected properly; faulty speakers. | Increase volume using the Jog Dial. Check speaker connections. Test with another audio source if possible. |
| Mikrofon tidak berfungsi. | Microphone not connected properly; faulty microphone. | Check microphone connection to the main unit. Ensure microphone is positioned correctly. |
7.1 Tetapan Semula Kilang
If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.
8. Spesifikasi
| Nama Model | Parani M10 |
| Versi Bluetooth | Bluetooth 5.1 |
| Julat Interkom | Sehingga 1 km (0.6 batu) di kawasan terbuka |
| Pengguna Interkom Maksimum | 4 (Parani-only network) |
| Masa Berbual | Sehingga 16 jam |
| Masa Mengecas | Lebih kurang 2.5 jam |
| Suhu Operasi | -10°C hingga 55°C (14°F hingga 131°F) |
| Berat badan | lebih kurang 60g (2.1 oz) |
Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.
9. Waranti dan Sokongan
9.1 Maklumat Waranti
Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena webtapak atau kad jaminan yang disertakan dengan produk anda. Simpan bukti pembelian anda untuk tuntutan waranti.
9.2 Sokongan Pelanggan
For technical assistance, troubleshooting, or general inquiries, please visit the official Sena website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.
- Sena Webtapak: www.sena.com
- Parani Webtapak: www.parani.com
