Manual Pengguna Alat Belajar Semula XTOOL TP150 TPMS

1. Pengenalan

The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.

2. Maklumat Keselamatan

Always observe the following safety precautions when operating the TP150 tool:

• Baca semua arahan dengan teliti sebelum digunakan.
• Do not operate the tool in wet conditions or near flammable liquids/gases.
• Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable.
• Use only the accessories and parts specified by XTOOL.
• Jauhkan alat daripada kanak-kanak.
• Properly dispose of old TPMS sensors and batteries according to local regulations.

3. Produk Lebihview

The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.

Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.

3.1. Ciri-ciri Utama

• TPMS Activation: Activates all known OE and aftermarket TPMS sensors.
• Belajar Semula TPMS: Supports OBD Relearn and Static Relearn for all sensors.
• Pengaturcaraan TPMS: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
• TPMS Diagnosis: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
• Paparan Data masa nyata: Shows sensor ID, tire pressure, temperature, and sensor voltage.
• OE Sensor Information Check: Displays brand, part number, and frequency of OE sensors.

4. Persediaan

4.1. Persediaan Peranti Awal

1. Bongkar: Carefully remove the TP150 tool and accessories from the packaging.
2. Hidupkan kuasa: Tekan butang kuasa untuk menghidupkan peranti.
3. Kemas Kini Perisian: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)

4.2. Menyambung ke Kenderaan

1. Cari port OBDII kenderaan, biasanya di bawah papan pemuka di sebelah pemandu.
2. Pastikan penyalaan kenderaan berada dalam kedudukan OFF.
3. Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
4. Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.

5. Arahan Operasi

The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.

5.1. Activating TPMS Sensors

1. Daripada menu utama, pilih "TPMS" or "Activate".
2. Pilih jenama, model dan tahun kenderaan.
3. Pilih "Activate Sensor".
4. Hold the TP150 tool near each tire's valve stem and press the activation button.
5. The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.

5.2. Prosedur Pembelajaran Semula TPMS

Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.

1. Daripada menu utama, pilih "TPMS", kemudian "Belajar semula".
2. Select the vehicle make, model, and year.
3. Choose the appropriate relearn method:
• Belajar Semula OBD: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
• Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
4. Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.

5.3. Programming XTOOL Sensors

The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.

1. Daripada menu utama, pilih "TPMS", kemudian "Program Sensor".
2. Place the XTOOL sensor to be programmed near the TP150's antenna.
3. Pilih salah satu daripada kaedah pengaturcaraan berikut:
• Automatic ID Generation: The tool generates a new, unique sensor ID.
• Enter ID Manually: Input a specific sensor ID if known.
• Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
• Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
4. Follow the on-screen prompts to complete the programming.

5.4. Diagnosing TPMS System

1. Connect the TP150 to the vehicle's OBDII port.
2. Daripada menu utama, pilih "TPMS", kemudian "Diagnosis".
3. The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
4. Review the displayed DTCs to identify system faults.
5. After repairs, select "Kosongkan DTC" to erase the codes and reset the TPMS warning light.

6. Penyelenggaraan

• Pembersihan: Lap peranti dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Storan: Store the TP150 in its protective case in a dry, cool environment when not in use.
• Kemas Kini Perisian: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models and sensors.
• Penjagaan Bateri: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

9.1. Maklumat Waranti

XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL website for detailed warranty terms and conditions, including duration and coverage specifics.

9.2. Sokongan Teknikal

For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:

• rasmi Webtapak: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
• Sokongan E-mel: Rujuk bahagian hubungan pada pegawai webtapak.
• Sumber Dalam Talian: Many helpful guides and videos may be available on the XTOOL website or their official social media channels.

When contacting support, please have your product model (XT-TP150) and serial number ready.