ASUS Prime A520M-K Motherboard User Manual

1. Pengenalan

This manual provides essential information for the installation, operation, and maintenance of your ASUS Prime A520M-K motherboard. The ASUS Prime A520M-K is a Micro-ATX motherboard designed for AMD AM4 socket processors, supporting 3rd Gen AMD Ryzen processors. It features DDR4 memory support, PCIe expansion, and multiple display outputs for a reliable computing experience.

Figure 1: ASUS Prime A520M-K Motherboard and Retail Box.

2. Persediaan dan Pemasangan

Careful installation is crucial for optimal performance. Ensure your system components are compatible with the ASUS Prime A520M-K motherboard.

2.1. Pemasangan Pemproses

The motherboard features an AMD AM4 socket. Align your AMD AM4 processor with the socket, ensuring the triangular markers on the CPU and socket match. Gently place the CPU into the socket without applying force, then secure it with the retention lever.

2.2. Pemasangan Memori

The ASUS Prime A520M-K supports up to 64GB of DDR4 RAM across two DIMM slots. Insert DDR4 memory modules into the slots, ensuring they are properly seated until the clips on both ends lock into place.

2.3. Kad Pengembangan

Utilize the PCIe expansion slots for graphics cards or other expansion cards. Align the card with the slot and press firmly until it is fully seated. Secure the card with a screw to the chassis.

2.4. Peranti Storan

Connect SATA storage devices (HDDs/SSDs) to the available SATA 6Gb/s ports using SATA data cables. Ensure power cables from your power supply are also connected to these devices.

2.5. Sambungan Kuasa

Sambungkan penyambung kuasa utama ATX 24-pin dan penyambung kuasa ATX 12V 8-pin daripada bekalan kuasa anda ke port yang sepadan pada papan induk.

2.6. Penyambung Panel Depan

Connect your chassis's front panel cables (power button, reset button, USB ports, audio jacks, LED indicators) to the designated headers on the motherboard. Refer to the motherboard diagram for precise locations.

2.7. Panel I/O Belakang

The rear I/O panel includes various ports for peripherals:

• D-SUB (VGA) Port: For connecting to older monitors.
• Port HDMI: For connecting to modern displays.
• Port USB 2.0: Untuk menyambungkan peranti persisian seperti papan kekunci dan tetikus.
• Port LAN: Untuk sambungan rangkaian.
• Bicu Audio: Untuk pembesar suara, fon kepala dan mikrofon.

Figure 2: Rear I/O panel with D-SUB, HDMI, USB, LAN, and audio ports.

3. Arahan Operasi

Sebaik sahaja semua komponen dipasang dan disambungkan, anda boleh menghidupkan sistem anda.

3.1. But Pertama

Upon the first boot, the system may enter the BIOS/UEFI setup utility. This allows you to configure system settings, boot order, and monitor hardware status. Press the designated key (usually Del or F2) during startup to access the BIOS.

3.2. Pemasangan Sistem Pengendalian

Install your preferred operating system (e.g., Windows) from a bootable USB drive or DVD. Follow the on-screen instructions provided by the operating system installer.

3.3. Pemasangan Pemandu

After installing the operating system, install the necessary drivers for the motherboard's chipset, audio, LAN, and any other integrated components. These drivers are typically provided on a support DVD or can be downloaded from the ASUS official webtapak.

4. Penyelenggaraan

Penyelenggaraan tetap membantu memastikan jangka hayat dan operasi yang stabil bagi motherboard anda.

• Penyingkiran habuk: Bersihkan habuk dari papan induk dan komponen secara berkala menggunakan udara termampat. Pastikan sistem dimatikan dan dicabut plag sebelum dibersihkan.
• Kemas Kini BIOS/UEFI: Keep your BIOS/UEFI firmware updated to benefit from performance improvements, bug fixes, and support for new hardware. Download updates only from the official ASUS webtapak.
• Pengurusan Kabel: Ensure all cables are neatly routed and secured to prevent obstruction of airflow and accidental disconnections.
• Bateri CMOS: The motherboard uses a small lithium-ion battery (CR2032) to retain BIOS settings and system time. If your system consistently loses time or BIOS settings, this battery may need replacement.

5. Penyelesaian masalah

Jika anda menghadapi masalah, rujuk langkah penyelesaian masalah biasa berikut:

• Tiada Kuasa: Check all power connections, including the 24-pin and 8-pin connectors to the motherboard, and ensure the power supply is switched on.
• Tiada Paparan: Verify that your monitor is connected to the correct display output (D-SUB or HDMI) on the motherboard or dedicated graphics card. Reseat the graphics card and RAM modules.
• Ketidakstabilan/Ranap Sistem: This can be caused by incompatible RAM, overheating, or outdated drivers. Check RAM compatibility, ensure proper cooling, and update all drivers.
• Ralat Poskod: If your motherboard has diagnostic LEDs or a POST code display, consult the ASUS website or full manual for the meaning of specific codes.
• Tetapan Semula BIOS: To reset BIOS settings to default, locate the CLRTC (Clear CMOS) jumper on the motherboard and follow the instructions in the full manual, or remove the CMOS battery for a few minutes.

6. Spesifikasi

Detailed technical specifications for the ASUS Prime A520M-K motherboard:

7. Waranti dan Sokongan

The ASUS Prime A520M-K motherboard typically comes with a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official ASUS support website for detailed warranty terms and conditions. For technical assistance, driver downloads, and further support, please visit the Sokongan ASUS webtapak.

Figure 3: ASUS Prime A520M-K Motherboard, indicating a 3-year warranty.