Manual Pengguna Titik Akses Luar/Industri Cisco Meraki MR76 Wi-Fi 6

1. Pengenalan

This manual provides essential information for the installation, configuration, and maintenance of your Cisco Meraki MR76 Wi-Fi 6 Outdoor/Industrial Access Point. The MR76 is designed for high-performance wireless connectivity in challenging outdoor and industrial environments, leveraging Wi-Fi 6 technology and integrated Bluetooth radios. It requires external antennas for operation and is managed through the Cisco Meraki cloud platform.

2. Maklumat Keselamatan

• Baca semua arahan: Before installation and operation, carefully read and understand all instructions provided in this manual.
• Kakitangan yang berkelayakan: Pemasangan dan servis hanya boleh dilakukan oleh kakitangan yang berkelayakan.
• Sumber kuasa: Ensure the power source meets the specifications for Power over Ethernet (PoE) and is properly grounded.
• Pemasangan antena: Install external antennas according to local regulations and manufacturer guidelines to avoid interference and ensure safety.
• Pertimbangan alam sekitar: While designed for outdoor use, avoid installing the device in locations subject to extreme temperatures, direct lightning strikes, or excessive vibration.
• Bahaya elektrik: Do not open the device enclosure. Refer all servicing to qualified service personnel.

3. Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

• Cisco Meraki MR76 Access Point unit
• Mounting bracket (for pole or wall mounting)
• Mounting hardware (screws, anchors, hose clamps)
• Panduan Mula Pantas
• Note: External antennas are required for operation and are sold separately.

4. Fizikal Overview

The MR76 features a robust, weatherproof enclosure suitable for outdoor and industrial deployments. It includes ports for network connectivity and antenna connections.

Rajah 1: Depan view of the Cisco Meraki MR76 Access Point. This image shows the compact design of the unit, which is built for outdoor and industrial environments.

Penunjuk LED

The device includes an LED indicator to provide status information:

• Hijau Pepejal: Device is online and operating normally.
• Hijau Berkelip: Peranti sedang but atau melakukan peningkatan perisian tegar.
• Amber pepejal: Device is experiencing a fault or is not connected to the Meraki cloud.

Pelabuhan dan Penyambung

• Pelabuhan Ethernet: RJ45 connector for network connectivity and Power over Ethernet (PoE) input.
• Penyambung Antena: Multiple N-type connectors for external Wi-Fi antennas.
• Butang Tetapkan Semula: Small button for factory reset (requires a paperclip or similar tool).

5. Pemasangan dan Persediaan

5.1 Memasang Titik Akses

The MR76 can be mounted on a pole or a wall. Choose a location that provides optimal wireless coverage and is accessible for maintenance.

1. Pilih Lokasi: Identify a suitable mounting location, considering line of sight for wireless signals and proximity to a PoE-enabled network switch.
2. Pasang Pendakap Pelekap: Secure the mounting bracket to the pole using the provided hose clamps or to a wall using screws and anchors. Ensure the bracket is firmly attached.
3. Attach MR76 to Bracket: Align the MR76 unit with the mounting bracket and slide it into place until it clicks securely.

5.2 Connecting External Antennas

The MR76 requires external antennas for Wi-Fi operation. Ensure you use compatible N-type antennas.

1. Identify Antenna Ports: Locate the N-type connectors on the MR76.
2. Pasang Antena: Carefully screw the external antennas onto the connectors. Hand-tighten only; do not overtighten.
3. Antena Kedudukan: Adjust the antenna orientation for optimal coverage based on your deployment plan.

5.3 Menguasakan Peranti

The MR76 is powered via Power over Ethernet (PoE).

1. Sambungkan Kabel Ethernet: Connect an Ethernet cable from a PoE-enabled switch or PoE injector to the Ethernet port on the MR76.
2. Sahkan Kuasa: Once connected, the LED indicator on the MR76 should illuminate, indicating power.

5.4 Sambungan Rangkaian

Ensure the Ethernet cable from the MR76 is connected to a network switch that has internet access and is configured for your Meraki network.

6. Pengendalian dan Konfigurasi

The Cisco Meraki MR76 is managed entirely through the Meraki cloud dashboard. No local configuration is required.

1. Access Meraki Dashboard: Buka a web pelayar dan navigasi ke papan pemuka.meraki.com. Log in with your Meraki account credentials.
2. Tambah Peranti: If this is a new device, add it to your network in the dashboard using its serial number.
3. Konfigurasikan Tetapan Rangkaian: Within the dashboard, configure your wireless SSIDs, security protocols (WPA2, WPA3), VLANs, and other network-specific settings.
4. Pantau Prestasi: Use the dashboard to monitor the access point's status, client connectivity, and overall network performance.
5. Bluetooth Radios: The integrated Bluetooth radios can be configured and managed via the Meraki dashboard for location services or IoT applications.

7. Penyelenggaraan

• Kemas kini Firmware: Firmware updates are automatically managed and deployed by the Meraki cloud. Ensure your device has a stable internet connection for these updates.
• Pemeriksaan Fizikal: Periodically inspect the device and antenna connections for any signs of damage, corrosion, or loose fittings, especially in harsh outdoor environments.
• Pembersihan: Gently clean the exterior of the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are sealed if not in use.
• Penjajaran Antena: Re-check antenna alignment if wireless performance degrades or if the device has been subjected to strong winds or physical impact.

8. Penyelesaian masalah

For further assistance, refer to the Cisco Meraki documentation or contact support.

9. Spesifikasi

10. Waranti dan Sokongan

The Cisco Meraki MR76 includes a 5-year license and support package (MR76-HW+LIC-ENT-5YR). This package provides access to the Meraki cloud management platform, firmware updates, and 24/7 technical support.

For technical assistance, documentation, or to open a support case, please visit the official Cisco Meraki support portal:

https://meraki.cisco.com/support