1. Pengenalan
This manual provides essential information for the proper installation, operation, and maintenance of the TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor. This inductive sensor is designed for non-contact detection of metallic objects.
Sila baca manual ini dengan teliti sebelum menggunakan produk ini bagi memastikan operasi yang selamat dan cekap.
2. Maklumat Keselamatan
WARNING: Failure to follow these safety instructions may result in personal injury or equipment damage.
- Ensure power is disconnected before installation, wiring, or maintenance.
- Only qualified personnel should install and service this device.
- Jangan melebihi vol yang ditentukantage dan penilaian semasa.
- Protect the sensor from mechanical impact and excessive vibration.
- Do not modify the sensor. Unauthorized modifications may void the warranty and compromise safety.
3. Produk Lebihview
The TURCK NI3-EG08K-AP6X-V1131 is an inductive proximity sensor with the following key features:
- model: NI3-EG08K-AP6X-V1131
- Julat Sensing: 3mm
- Perumahan: M8x1 Barrel, 8mm stainless steel full threading short barrel
- Jenis Output: Normally Open (NO) PNP
- Vol Operasitage: 10-30 VDC
- Sambungan: M8 Male Connector (Picofast 3-Pin QD Connector)
- Penunjuk: 1 LED for operational status
This sensor is designed for reliable detection of metallic targets in industrial environments.
4. Persediaan dan Pemasangan
4.1 Pemasangan
- Select a mounting location where the sensor is protected from physical damage and excessive heat.
- Mount the M8x1 barrel sensor using appropriate mounting hardware, ensuring it is securely fastened.
- Maintain adequate clearance around the sensor head to prevent interference from surrounding metallic objects, especially for flush-mountable sensors. Refer to the sensor's datasheet for specific mounting distances.
4.2 Pendawaian
The sensor features a 3-pin M8 male connector. Follow the standard wiring color code for PNP sensors:
- Pin 1 (Brown): +VDC (10-30VDC)
- Pin 3 (Blue): 0VDC (Ground)
- Pin 4 (Black): Output (PNP, Normally Open)
Connect the sensor to the control system according to the wiring diagram provided by the system manufacturer. Ensure all connections are secure and properly insulated.
5. Operasi
Once properly installed and wired, apply power to the sensor. The integrated LED indicator will provide status feedback:
- DIPERLUKAN: Indicates that a metallic object is within the sensing range and the output is active (PNP output is high).
- LED MATI: Indicates no metallic object is detected within the sensing range and the output is inactive (PNP output is low).
The sensor operates by generating an electromagnetic field. When a metallic object enters this field, it causes a change in oscillation, triggering the output. The 3mm sensing range ensures reliable detection for small to medium-sized metallic targets.
6. Penyelenggaraan
The TURCK NI3-EG08K-AP6X-V1131 sensor is designed for minimal maintenance. However, regular inspection can prolong its lifespan and ensure reliable operation.
- Pembersihan: Periodically clean the sensor face to remove dust, dirt, or debris that may accumulate and affect sensing performance. Use a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Pemeriksaan: Check wiring and connections for any signs of damage, corrosion, or loose contacts. Ensure the sensor is securely mounted and not subjected to excessive vibration.
- Keadaan Persekitaran: Pastikan persekitaran operasi kekal dalam julat suhu dan kelembapan yang ditetapkan.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Sensor not detecting objects / LED always OFF |
|
|
| Sensor always ON / LED always ON |
|
|
| Intermittent detection |
|
|
8. Spesifikasi
| Parameter | Nilai |
|---|---|
| Nombor Model | NI3-EG08K-AP6X-V1131 |
| Pengeluar | Turk |
| Julat Penderiaan | 3mm |
| Jenis Perumahan | M8x1 Barrel, 8mm stainless steel full threading short barrel |
| Jenis Output | PNP, Biasanya Terbuka (TIDAK) |
| Vol Operasitage | 10-30 VDC |
| Sambungan | M8 Male Connector (Picofast 3-Pin QD) |
| Penunjuk | 1 LED |
| ASIN | B0898TS8W2 |
| Tarikh Mula-mula Tersedia | 27 Mei 2020 |
9. Waranti dan Sokongan
For specific warranty information, please refer to the documentation provided with your purchase or contact Turck customer support directly. General warranty terms typically cover defects in materials and workmanship for a specified period from the date of purchase.
For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact Turck customer service or your authorized distributor. Have your model number (NI3-EG08K-AP6X-V1131) ready when contacting support.
Turck Official Webtapak: www.turck.com
