RunCam Key Board for FPV Camera OSD Setting - Instruction Manual

1. Produk Lebihview

The RunCam Key Board is an essential accessory designed to facilitate the configuration of On-Screen Display (OSD) settings for compatible RunCam FPV cameras. This compact board allows users to navigate and adjust camera parameters directly, ensuring optimal performance and personalized visual feedback during flight.

Kandungan Pakej

• 1 x RunCam Key Board
• 1 x FPV Cable (1.25mm pin distance)

Rajah 1: The RunCam Key Board, a small blue circuit board with five orange buttons, connected to a twisted pair FPV cable. This image illustrates the physical components included in the package.

2. Persediaan dan Sambungan

The RunCam Key Board connects directly to your compatible RunCam FPV camera to enable OSD menu access. Follow these steps for proper connection:

1. Identify the OSD Port: Locate the dedicated OSD configuration port on your RunCam FPV camera. This port typically uses a 1.25mm pin distance connector.
2. Connect the FPV Cable: Carefully connect the provided FPV cable from the RunCam Key Board to the OSD port on your camera. Ensure the connector is aligned correctly to avoid damage to the pins.
3. Hidupkan kuasa: Once connected, power on your FPV system (camera and video receiver). The OSD menu should become accessible through the key board.

Keserasian

The RunCam Key Board is compatible with a wide range of RunCam FPV cameras, including but not limited to:

• RunCam Eagle 2 Pro
• RunCam Micro Sparrow
• RunCam Sparrow
• RunCam Micro Swift 2
• RunCam Eagle 2
• RunCam Owl 2
• RunCam Micro Swift
• RunCam Swift Mini
• RunCam Swift 2 FPV Cameras
• RunCam Hybrid
• RunCam Split3
• RunCam Split3 Nano Whoop
• Most RunCam Analog FPV Cameras

3. Arahan Operasi

Once the RunCam Key Board is connected and your FPV system is powered on, you can use the buttons to navigate and adjust your camera's OSD settings. The specific functions of each button may vary slightly depending on your camera model, but generally follow a standard pattern:

• Butang Tengah: Typically used to enter the OSD menu or confirm a selection.
• Butang Naik / Turun: Digunakan untuk menavigasi melalui pilihan menu.
• Butang Kiri/Kanan: Used to change values or move between sub-menus.

Refer to your specific RunCam FPV camera's manual for detailed OSD menu navigation and parameter descriptions. After completing your camera settings, it is recommended to disconnect the RunCam Key Board before flying to prevent accidental changes and reduce weight.

4. Penyelenggaraan

The RunCam Key Board is a durable electronic component, but proper care ensures its longevity:

• Storan: Store the key board in a dry, dust-free environment when not in use.
• Pembersihan: If necessary, gently wipe the board with a dry, soft cloth. Avoid using liquids or harsh chemicals.
• Pengendalian: Handle the board by its edges to avoid touching the electronic components directly. Do not apply excessive force to the buttons or connectors.
• Penjagaan Kabel: Ensure the FPV cable is not bent sharply or subjected to strain, which could damage the internal wires or connectors.

5. Penyelesaian masalah

If you encounter issues while using the RunCam Key Board, consider the following:

• No OSD Menu Appears:
  • Ensure the FPV cable is securely connected to both the key board and the camera.
  • Verify that your camera is powered on and functioning correctly.
  • Confirm that your camera model is listed as compatible with the RunCam Key Board.
• Butang Tidak Menjawab:
  • Check for any visible damage to the buttons or the board itself.
  • Ensure the cable connection is firm and there are no loose wires.
• Limited OSD Options:
  • The available OSD options are determined by your specific camera model. Some cameras may have fewer configurable settings than others. Refer to your camera's manual for its full OSD capabilities.

6. Spesifikasi

7. Waranti dan Sokongan

For warranty information, technical support, or further inquiries regarding your RunCam Key Board or compatible RunCam FPV cameras, please visit the official RunCam webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung.

Anda boleh mendapatkan lebih banyak maklumat dan sumber sokongan di RunCam Official Store on Amazon.