pengenalan
The Hyperkin Armor3 NuWave Controller is designed to provide accurate and fluid motion control for your Nintendo Wii U and Wii consoles. Featuring built-in Nu+ technology, this controller enhances your gaming experience by offering a wider range of motion in compatible titles. This manual provides essential information on setting up, operating, maintaining, and troubleshooting your NuWave Controller.
Rajah 1: Hyperkin Armor3 NuWave Controller and its packaging. The controller is black with a wrist strap, and the packaging highlights its Nu+ technology and compatibility with Wii U and Wii.
Produk Selesaiview
The Armor3 NuWave Controller is a motion-sensing controller compatible with both Wii U and Wii systems. It integrates advanced Nu+ technology for enhanced motion detection and precision in supported games.
Ciri-ciri Utama:
- Keserasian: Fully compatible with Nintendo Wii U and Nintendo Wii consoles.
- Nu+ Technology: Built-in technology for a wider range of motion and improved accuracy in compatible titles.
- Reka bentuk ergonomik: Designed for comfortable grip and extended gameplay sessions.
- Sumber Kuasa: Memerlukan 2 bateri AA (tidak termasuk).
Persediaan
1. Pemasangan Bateri
- Cari petak bateri di bahagian belakang pengawal.
- Luncurkan penutup bateri ke bawah untuk membukanya.
- Masukkan dua (2) bateri AA, pastikan kekutuban (+/-) betul seperti yang ditunjukkan di dalam petak.
- Replace the battery cover by sliding it upwards until it clicks into place.
2. Connecting to Your Console
To connect the NuWave Controller to your Wii U or Wii console, follow these steps:
- Pastikan konsol anda dihidupkan.
- On your Wii U or Wii console, press the SYNC button (usually located near the SD card slot or battery compartment).
- On the NuWave Controller, open the battery cover and locate the small red SYNC button inside the battery compartment.
- Press and release the SYNC button on the controller.
- The player indicator lights on the bottom of the controller will flash. Once a single light remains lit, the controller is successfully connected.
- If connection fails, repeat steps 2-5. Ensure the controller is within range of the console.
Arahan Operasi
Kawalan Asas:
- Pad Arah (D-Pad): Used for menu navigation and character movement.
- Butang: Primary action button, often used for selection or interaction.
- B Button (Trigger): Located on the underside, typically used for grabbing or firing.
- 1 & 2 Buttons: Auxiliary action buttons, functions vary by game.
- Butang rumah: Returns to the console's Home Menu.
- Plus (+) & Minus (-) Buttons: Often used for zooming, adjusting settings, or specific in-game actions.
- Butang Kuasa: Menghidupkan/mematikan pengawal.
Motion Sensing with Nu+ Technology:
The built-in Nu+ technology provides enhanced motion tracking. For games that support it, you will experience more precise and responsive movements. Hold the controller firmly and ensure clear line of sight to the sensor bar for optimal performance.
- Penentukuran: Some games may require initial calibration. Follow on-screen prompts.
- Tali pergelangan tangan: Always use the included wrist strap to prevent accidental drops during active gameplay.
Penyelenggaraan
Pembersihan:
- Lap pengawal dengan kain lembut dan kering.
- Untuk kotoran degil, sedikit dampLap kain dengan air. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Ensure no liquid enters the controller's openings.
Storan:
- Simpan pengawal di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
- Jika menyimpan untuk tempoh yang lama, keluarkan bateri untuk mengelakkan kebocoran.
Penjagaan Bateri:
- Always use new, high-quality AA batteries.
- Jangan campurkan bateri lama dan baharu, atau jenis bateri yang berlainan.
- Buang bateri terpakai secara bertanggungjawab mengikut peraturan tempatan.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pengawal tidak dihidupkan. | Bateri mati atau salah dimasukkan. | Gantikan bateri dengan bateri AA baharu, memastikan kekutuban yang betul. |
| Controller does not sync with console. | Incorrect syncing procedure; out of range; console interference. | Ensure console is on. Repeat syncing steps (press SYNC on console, then on controller). Move closer to console. Check for other wireless device interference. |
| Buttons are unresponsive or delayed. | Low battery; connection issue; physical obstruction. | Replace batteries. Re-sync the controller. Ensure buttons are not stuck. |
| Motion control is inaccurate. | Sensor bar obstruction; improper calibration; environmental factors. | Ensure clear line of sight to the sensor bar. Re-calibrate in-game if prompted. Avoid strong light sources directly facing the sensor bar. |
Spesifikasi
- model: M07399-bk
- Jenama: Hyperkin
- Keserasian: Nintendo Wii U, Nintendo Wii
- Sumber Kuasa: 2 x Bateri AA (tidak termasuk)
- Dimensi: 2.8 x 1.8 x 8 inci (anggaran)
- Berat: 3.88 ounces (approximate, without batteries)
- Teknologi: Built-in Nu+ motion technology
- warna: Hitam
Waranti dan Sokongan
For specific warranty information and terms, please refer to the documentation included with your purchase or visit the official Hyperkin website. Hyperkin provides customer support for their products.
Sokongan dalam talian: Visit the official Hyperkin webtapak untuk Soalan Lazim, panduan penyelesaian masalah dan maklumat hubungan. www.hyperkin.com
Hubungi: Refer to the Hyperkin website for the most current customer service contact methods (phone, email, etc.).
