Strymon TimeLine Multidimensional Delay Pedal User Manual
model: TML
Your guide to unlocking the full potential of your Strymon TimeLine.
1. Pengenalan
The Strymon TimeLine is a powerful and versatile multidimensional delay pedal designed to provide an extensive range of studio-quality delay effects. Featuring 12 distinct delay algorithms, a comprehensive 30-second stereo looper, and full MIDI implementation, the TimeLine offers unparalleled creative possibilities for guitarists and musicians.
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your TimeLine pedal, ensuring you get the most out of its advanced features.
2. Bermula: Persediaan
2.1. Apa yang ada di dalam Kotak
- Strymon TimeLine Multidimensional Delay Pedal
- Bekalan Kuasa 9 volt
2.2. Sambungan Kuasa
Connect the included 9-volt DC power supply to the 9VDC input jack on the rear panel of the TimeLine pedal. Ensure the power supply is rated for 9V DC with a center-negative polarity and sufficient current (minimum 300mA recommended).
2.3. Sambungan Audio
The TimeLine supports both mono and stereo operation. Use standard 1/4-inch instrument cables for all audio connections.
- Persediaan Mono: Connect your instrument or preceding pedal to the LEFT IN jack. Connect the MENINGGALKAN jek kepada anda amppedal atau pedal seterusnya.
- Persediaan Stereo: Connect your stereo signal source to both LEFT IN dan RIGHT IN jacks. Connect the MENINGGALKAN dan TERUS KELUAR jacks to your stereo amppersediaan pengadun atau pencampur.
- Gelung Kesan: The KEMBALI dan HANTAR jacks can be used for an external effects loop, allowing you to insert other pedals into the TimeLine's signal path.
Figure 2.3.1: Rear panel connections including Left/Right In/Out, Expression, MIDI, and Power.
2.4. Sambungan MIDI
The TimeLine features MIDI DALAM dan MIDI KELUAR ports for advanced control and synchronization. Use standard 5-pin DIN MIDI cables to connect to MIDI controllers, interfaces, or other MIDI-enabled devices.
- MIDI DALAM: Receives MIDI messages for parameter control, preset changes, and tempo synchronization.
- MIDI KELUAR: Transmits MIDI messages, including MIDI clock and parameter changes.
Figure 2.4.1: MIDI In and Out ports with connected cables.
2.5. Expression Pedal Input
Connect an expression pedal to the EXP jack using a TRS (stereo) cable. This allows real-time control over various parameters, such as delay time, mix, or feedback, for dynamic performance.
Figure 2.5.1: Expression pedal connected to the TimeLine.
3. Operasi
3.1. Kawalan Ke Atasview
The TimeLine features a comprehensive set of knobs and footswitches for intuitive control over its delay parameters and looper functions.
Figure 3.1.1: Front panel controls of the Strymon TimeLine.
- VALUE (push param): Adjusts the currently selected parameter. Push to cycle through parameters.
- MASA: Mengawal masa kelewatan.
- BERULANG: Adjusts the number of delay repeats (feedback).
- CAMPURAN: Controls the blend between dry and wet signals.
- PENAPIS: Adjusts the tone of the delay repeats.
- MENANG: Adds character and saturation to the delay repeats.
- SPEED / MOD / DEPTH: Controls modulation parameters depending on the delay type.
- Tombol JENIS: Selects one of the 12 delay algorithms.
- REC/DUB Footswitch (A): Records or overdubs loops.
- PLAY Footswitch (B): Plays or stops loops.
- TAP Suis Kaki: Taps in tempo or stops looper (hold).
3.2. Delay Algorithms
The TimeLine offers 12 unique delay machines, each with its own distinct character and adjustable parameters:
- Digital: Crystal-clear digital delay.
- Dwi: Two independent delay lines, configurable in series or parallel.
- Corak: Multi-tap patterns for rhythmic delays.
- terbalik: Delays played backward.
- ais: Slices and dices input with selectable interval shift.
- itik: Delay level ducks when playing, swells when silent.
- dBucket: Analog bucket-brigade style delay recreation.
- dTape: Emulates classic tape echo machines.
- Lo-Fi: Adds bit depth and sample rate reduction for vintage bunyi.
- Bengkak: Variable swell time with the delay.
- Trem: Synchronized tremolo with waveshape, depth, and speed.
- Penapis: Synchronized filter placed before or after the delay.
Gambar 3.2.1: Lebihview of the 12 unique delay algorithms.
3.3. Fungsi Penggelung
The TimeLine includes a powerful 30-second stereo looper. It can be routed pre- or post-delay, allowing for creative layering and sound design.
- Rakaman: Tekan REC/DUB (A) untuk memulakan rakaman.
- Berlebihan alih suara: Semasa bermain, tekan REC/DUB (A) again to overdub.
- Main balik: Tekan PLAY (B) untuk memulakan atau menghentikan main balik.
- Berhenti: tahan TAP footswitch to stop the looper.
- Buat asal/Buat Semula: Advanced looper functions are accessible via MultiSwitch or MIDI.
Figure 3.3.1: Built-in looper capabilities.
3.4. Menyimpan dan Mengingat semula Pratetap
The TimeLine allows you to save and recall your custom delay settings. The pedal has 200 preset locations, organized into 100 banks (A and B per bank).
- Menyimpan: To save a preset, hold the JENIS knob until the display indicates "SAVE". Use the NILAI knob to select a preset location, then press NILAI untuk mengesahkan.
- Recalling: Gunakan BANK TURUN dan BANK UP footswitches (A and B when not in looper mode) to navigate through banks. Press the corresponding footswitch (A or B) to load the desired preset.
4. Penyelenggaraan
Proper maintenance ensures the longevity and optimal performance of your Strymon TimeLine pedal.
- Pembersihan: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Storan: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power supply.
- Kemas kini Firmware: Periodically check the official Strymon website for any available firmware updates. Updates can introduce new features, improvements, or bug fixes. Follow the instructions provided by Strymon for any update procedures.
5. Penyelesaian masalah
If you encounter issues with your TimeLine pedal, refer to the following common troubleshooting steps:
| Masalah | Kemungkinan Punca / Penyelesaian |
|---|---|
| No power / Pedal not turning on |
|
| No sound / Dry signal only |
|
| Unexpected behavior / Glitches |
|
| Looper tidak merakam/bermain |
|
For more detailed troubleshooting or issues not covered here, please visit the official Strymon support webtapak atau hubungi perkhidmatan pelanggan mereka.
6. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | TML |
| Berat Barang | 2.03 paun (921 Gram) |
| Dimensi Produk | 10.24 x 5.91 x 3.54 inci |
| Sumber Kuasa | Elektrik Bertali |
| Voltage | 9 Volts DC (center-negative) |
| Jenis Penyambung | 1/4-inch audio jack, 5-pin DIN MIDI |
| Antara Muka Perkakasan | 1/4-inch Audio, MIDI |
| Format Isyarat | Analog (input/output), Digital (internal processing) |
| Delay Types | 12 (Digital, Dual, Pattern, Reverse, Ice, Duck, dBucket, dTape, Lo-Fi, Swell, Trem, Filter) |
| Looper Length | 30 seconds (stereo) |
| Pratetap | 200 (100 banks x 2 presets) |
7. Waranti dan Sokongan
Strymon products are built with high-quality components and undergo rigorous testing. For information regarding the warranty period and terms for your TimeLine pedal, please refer to the warranty card included with your product or visit the official Strymon webtapak.
For technical support, product registration, or to access additional resources such as FAQs and firmware downloads, please visit the official Strymon support page or their Amazon Brand Store:
