MPM MZP-01

Manual Arahan Pengukus Pakaian Vertikal MPM MZP-01

Model: MZP-01 | Brand: MPM

Produk Selesaiview

This steam brush is designed to eliminate wrinkles, deodorize, and disinfect all types of fabrics quickly and easily. It is ready for use in seconds. The long cable allows for comfortable movement across the fabric without annoying pulling. It can be used on all types of fabrics and garments without fear of damage. It also includes an accessory for delicate garments and another for thicker fabrics.

Ciri-ciri Utama

Arahan Keselamatan

Sila baca semua arahan keselamatan dengan teliti sebelum menggunakan perkakas. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.

Komponen

MPM MZP-01 Vertical Garment Steamer

Image showing the complete MPM MZP-01 Vertical Garment Steamer, highlighting its main body, water tank, and steam head.

MPM MZP-01 Steamer with steam emitting

Image of the MPM MZP-01 steamer in operation, with visible steam emanating from the steam head, demonstrating its function.

Hand holding MPM MZP-01 Steamer

Image showing a hand holding the MPM MZP-01 steamer, illustrating its ergonomic design and compact size for handheld use.

MPM MZP-01 Steamer with bristle brush attachment

Close-up image of the MPM MZP-01 steamer head with the bristle brush attachment installed, demonstrating one of the interchangeable accessories.

Senarai Komponen

Persediaan

  1. Ensure the appliance is unplugged from the power outlet before beginning.
  2. Remove the water tank from the main unit by gently pulling it downwards.
  3. Open the water tank cap and fill with distilled or demineralized water up to the 'MAX' line (250 ml capacity). Do not overfill. Using tap water may lead to mineral buildup.
  4. Securely close the water tank cap and reattach the tank to the main unit, ensuring it clicks into place.
  5. Select the appropriate attachment (velvet brush for delicate fabrics, bristle brush for thicker fabrics) and securely attach it to the steam head if needed.
  6. Palamkan kord kuasa ke salur keluar elektrik yang sesuai (220 Volt).

Arahan Operasi

Pakaian Mengukus

  1. After plugging in, the steamer will begin to heat up. It is ready for use in approximately 30-45 seconds.
  2. Gantungkan pakaian pada penyangkut. Untuk hasil terbaik, tarik fabrik kencang dengan sebelah tangan sambil mengukus dengan tangan yang sebelah lagi.
  3. Press and hold the steam button to release continuous steam. Move the steam head slowly over the fabric, from top to bottom.
  4. Untuk kedutan degil, sapukan kepala wap ke atas kawasan tersebut beberapa kali.
  5. Use the velvet brush for delicate materials like silk or satin. Use the bristle brush for heavier fabrics like wool or denim to help lift fibers and remove lint.
  6. Release the steam button to stop steaming.
  7. After steaming, allow the garment to cool and dry completely before wearing or storing.

Steaming Curtains and Upholstery

  1. Ensure curtains or upholstery are suitable for steam treatment. Test on an inconspicuous area first.
  2. Hold the steamer upright and move the steam head over the fabric, maintaining a slight distance.
  3. Do not over-saturate the fabric.

Penyelenggaraan dan Penjagaan

Pembersihan

  1. Sentiasa cabut plag pengukus dan biarkan ia sejuk sepenuhnya sebelum membersihkannya.
  2. Kosongkan baki air dari tangki.
  3. Lap bahagian luar pengukus dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
  4. Clean the steam head regularly to prevent mineral buildup. Use a cotton swab or small brush to clear steam vents if necessary.

Penyahkelasan

To maintain optimal performance and extend the life of your steamer, regular descaling is recommended, especially in areas with hard water.

  1. Campurkan larutan 50% cuka putih dan 50% air suling.
  2. Pour the solution into the water tank up to the 'MAX' line.
  3. Plug in the steamer and allow it to heat up. Run the steamer until half of the solution has been used, directing steam into a sink or bucket.
  4. Unplug the steamer and let it cool for 30 minutes.
  5. Ulangi proses mengukus dengan larutan yang tinggal.
  6. Empty the tank and rinse thoroughly with fresh distilled water. Fill with fresh distilled water and run the steamer until the tank is empty to flush out any remaining vinegar.

Penyimpanan

Ensure the steamer is completely cool and dry before storing. Store in a cool, dry place, away from direct sunlight and moisture.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Tiada wapTangki air kosongFill water tank with distilled or demineralized water.
Tiada wapSteamer not heatedAllow 30-45 seconds for the steamer to fully heat up.
Tiada wapSteam vents clogged with mineral buildupPerform descaling procedure as described in the Maintenance section.
Water spitting/leakingTangki air penuhDo not fill past the 'MAX' line. Empty excess water.
Water spitting/leakingPengumpulan mineralLakukan prosedur nyah kerak.
Water spitting/leakingSteamer not hot enoughAllow full heating time before use.
Poor wrinkle removalTidak cukup wapEnsure water tank is full and steamer is fully heated. Press and hold steam button.
Poor wrinkle removalFabric not tautPull fabric taut while steaming to allow steam to penetrate effectively.

Spesifikasi

Waranti dan Sokongan

For product support or inquiries, please refer to the retailer's customer service or the manufacturer's official website. Specific warranty details may vary by region and retailer.

This product is subject to the return policy of the retailer from which it was purchased. For purchases made on Amazon.com.be, a 30-day return policy applies for refunds or replacements, fulfilled by Amazon.

Dokumen Berkaitan - MZP-01

Praview MPM LR-027-86 & LR-027-84 Fabric Shaver User Manual
User manual for the MPM LR-027-86 and LR-027-84 fabric shavers, providing instructions on safe usage, operation, cleaning, and maintenance.
Praview Manual Pengguna Peti Sejuk/Penyejuk beku Siri MPM MPM-216-CF
Manual ini menyediakan arahan untuk peti sejuk/penyejuk beku MPM-216-CF-26, MPM-216-CF-27 dan MPM-216-CF-28, meliputi maklumat keselamatan, penggunaan harian, pemasangan, penyelesaian masalah dan penyelenggaraan.
Praview Instrukcja Obsługi Płyty Indukcyjnej MPM-60-IM-15
Instrukcja obsługi dla płyty indukcyjnej MPM model MPM-60-IM-15, zawierająca informacje o montażu, użytkowaniu, bezpieczeństwie, konserwacji, rozwiązywaniu problemów, danych gc waruniu.
Praview MPM Chłodziarko-zamrażarka MPM-285-KB-31/E, MPM-285-KB-37/E, MPM-286-KB-34/E - Instrukcja Obsługi
Kompleksowa instrukcja obsługi dla chłodziarko-zamrażarek MPM modeli MPM-285-KB-31/E, MPM-285-KB-37/E, MPM-286-KB-34/E. Zawiera informacje o bezpieczeństwie, instalacji, codziennym użytkowaniu, pielęgnacji, czyszczeniu, rozwiązywaniu problemów dan danych technicznych.
Praview MPM-20-KMT-04 Mikrovlná trouba: Navod k obsluze and bezpečnostní pokyny
Kompletní návod k obsluze pro mikrovlnnou troubu MPM-20-KMT-04. Obsahuje důležité bezpečnostní pokyny, maklumat atau pemasangan, čištění, provozu a údržbě.
Praview Instrukcja obsługi MPM-375-FR-53, MPM-375-FR-54
Instrukcja obsługi dla chłodziarko-zamrażarki MPM Total No Frost, modele MPM-375-FR-53 i MPM-375-FR-54. Zawiera informacje o bezpieczeństwie, instalacji, użytkowaniu i konserwacji.