pengenalan
This manual provides essential information for the safe and efficient operation of your RCF ART 710A active 2-way speaker. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Rajah 1: Depan view of the RCF ART 710A active speaker, showcasing its robust grille and RCF logo.
Maklumat Keselamatan Penting
- Bekalan Kuasa: Pastikan bekalan kuasa voltage matches the requirements specified on the unit. Use only the provided power cord.
- Pengudaraan: Jangan sekat bukaan pengudaraan. Pastikan aliran udara yang mencukupi di sekeliling unit untuk mengelakkan terlalu panas.
- Kelembapan: Do not expose the unit to rain or moisture. Avoid placing liquids on or near the speaker.
- penempatan: Place the speaker on a stable, level surface or mount it securely using appropriate hardware.
- Servis: Rujuk semua servis kepada kakitangan servis yang berkelayakan. Jangan cuba membuka atau membaiki unit itu sendiri.
- Perlindungan Pendengaran: Pendedahan berpanjangan kepada tahap tekanan bunyi yang tinggi boleh menyebabkan kerosakan pendengaran kekal. Gunakan pelindung pendengaran apabila beroperasi pada kelantangan tinggi.
Ciri-ciri Utama
- 1400W Peak Power, 700W RMS
- 10-inch Woofer, 1-inch Compression Driver
- FiRPHASE Technology for linear response
- Integrated DSP with equalization, phase control, soft limiting, crossover, and speaker protections
- Kelas D Amppenghidup
- Frequency Response: 50 Hz - 20 kHz
- SPL Maksimum: 129 dB
Persediaan
1. Membongkar
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.
2. Penempatan dan Pemasangan
The ART 710A can be used as a main front-of-house speaker, a stage monitor, or mounted on a pole. Ensure the speaker is placed on a stable surface or securely mounted.
- Pemasangan tiang: Use a standard 35mm speaker pole. Ensure the pole is rated to support the speaker's weight (approximately 37 lbs / 16.8 kg).
- Peletakan Lantai: Untuk stage monitor applications, position the speaker at the desired angle.
- Penggantungan: If suspending the speaker, consult a qualified professional and use appropriate rigging hardware.
Rajah 2: Atas view of the RCF ART 710A, highlighting the integrated pole mount socket for stand placement.
3. Sambungan
Refer to the rear panel for all input and output connections.
Figure 3: Rear panel of the RCF ART 710A, displaying XLR inputs, output, volume control, and power connection.
- Input Audio: Connect your audio source (mixer, instrument, etc.) to the INPUT SEIMBANG menggunakan kabel XLR.
- Audio Output (Link): Gunakan OUTPUT YANG DIimbangkan to link to another speaker or audio device.
- Input Kuasa: Connect the provided power cord to the INPUT AC soket.
- Suis Kepekaan Input: Adjust for microphone or line-level signals.
- Kawalan Kelantangan: Adjust the overall output level of the speaker.
Arahan Operasi
1. Menghidupkan/Mematikan
- Ensure all connections are secure and the volume control is set to minimum before powering on.
- Balikkan SUIS KUASA to the "ON" position. The power indicator LED will illuminate.
- To power off, set the volume to minimum, then flip the SUIS KUASA to "OFF".
2. Adjusting Volume and Input Sensitivity
- Mulakan dengan JILID control at its minimum setting.
- Tetapkan SENSITIVITI INPUT switch according to your source: "MIC" for microphone level signals, "LINE" for line level signals (e.g., mixer output).
- Meningkatkan secara beransur-ansur JILID control to the desired listening level. Monitor the signal LEDs to avoid clipping (distortion).
3. DSP Functions (Internal Processing)
The ART 710A features an integrated Digital Signal Processor (DSP) that manages equalization, phase control, soft limiting, crossover, and speaker protections automatically. There are no user-adjustable DSP parameters directly on the unit. The system is optimized for a linear response and balanced sound.
Penyelenggaraan
- Pembersihan: Clean the speaker cabinet with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- gril: Periodically check the front grille for dust or debris and gently clean if necessary to maintain optimal sound dispersion.
- Storan: When not in use for extended periods, store the speaker in a dry, temperate environment, ideally in its original packaging or a protective cover.
- Pemeriksaan: Regularly inspect power cables and audio cables for any signs of wear or damage. Replace damaged cables immediately.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada keluaran bunyi |
|
|
| Bunyi herot |
|
|
| Hum atau bunyi bising |
|
|
Spesifikasi Teknikal
| Ciri | Perincian |
|---|---|
| Model | RCF ART 710A |
| Jenis Pembesar Suara | Active 2-way Speaker |
| Output Kuasa | Puncak 1400W, 700W RMS |
| Woofer | 10 inci |
| Pemacu Mampatan | 1 inci |
| Respons Kekerapan | 50 Hz - 20 kHz |
| SPL maks | 129 dB |
| Ciri DSP | FiRPHASE Technology, EQ, Phase Control, Soft Limiting, Crossover, Protections |
| AmpJenis yang lebih hidup | Kelas D |
| Penyambung Input | XLR |
| Penyambung Output | XLR |
| Dimensi (H x W x D) | 22.3 x 15.4 x 13.9 inci (56.6 x 39.1 x 35.3 cm) |
| Berat badan | 37 paun (16.8 kg) |
| Sumber Kuasa | Elektrik Bertali |
Maklumat Waranti
RCF products are covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please refer to the official RCF website or your local distributor for detailed warranty information and registration procedures. Keep your proof of purchase for warranty claims.
Sokongan Pelanggan
For technical assistance, service, or spare parts, please contact RCF customer support or your authorized RCF dealer. You can find contact information on the official RCF webtapak:
When contacting support, please have your product model (ART 710A) and serial number ready. The serial number is located on the rear panel of the speaker.
