Fender Monterey Bluetooth Speaker Instruction Manual

1. Produk Lebihview

The Fender Monterey Bluetooth Speaker delivers clear, powerful audio with a design inspired by classic Fender amplifiers. This speaker is engineered for high-fidelity sound reproduction, featuring 120 watts of power, two woofers, and two tweeters. It supports audio streaming via Bluetooth and direct connection through a 3.5mm auxiliary jack or RCA inputs.

Rajah 1: Depan view of the Fender Monterey Bluetooth Speaker, showcasing its classic amplifier-inspired grille and Fender logo.

2. Apa yang ada di dalam Kotak

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• Fender Monterey Bluetooth Speaker
• Kabel Tambahan 3.5 mm
• RCA kabel
• Kabel Kuasa

3. Panduan Persediaan

3.1 Sambungan Kuasa

1. Ensure the speaker's volume control is set to minimum before connecting power.
2. Connect the supplied power cable to the AC input on the rear panel of the speaker.
3. Pasangkan hujung kabel kuasa yang satu lagi ke soket dinding yang sesuai (100-240V, 50/60Hz).
4. Flip the power switch on the top panel to the "ON" position. The speaker will emit a chime indicating it is powered on.

Figure 2: Rear panel of the Fender Monterey speaker, showing the power input and auxiliary connections.

3.2 Berpasangan Bluetooth

1. With the speaker powered on, press the PASANGAN button on the top panel. The Bluetooth indicator light will begin to flash, indicating it is in pairing mode.
2. On your audio device (smartphone, tablet, computer), navigate to the Bluetooth settings.
3. Select "Fender Monterey" from the list of available devices.
4. Once successfully paired, the Bluetooth indicator light on the speaker will turn solid blue, and a confirmation chime will sound.

3.3 Auxiliary Input Connection

For devices without Bluetooth, use the provided 3.5mm auxiliary cable or RCA cable.

• Aux 3.5mm: Connect one end of the 3.5mm cable to your audio device's headphone jack and the other end to the MINI input on the speaker's top panel.
• RCA: Connect the RCA cable to your audio device's RCA outputs and the other end to the RCA inputs on the speaker's rear panel.

Select the appropriate source (BLUETOOTH, MINI, atau RCA) menggunakan SUMBER butang pada panel atas.

Figure 3: Top panel controls of the Fender Monterey speaker, including Volume, Treble, Bass, Source, and Pair buttons.

4. Arahan Operasi

4.1 Main Balik Audio

1. Ensure your audio source is connected and selected (Bluetooth, Mini, or RCA).
2. Start playing audio from your connected device.
3. Laraskan JILID knob on the speaker's top panel to your desired listening level.

4.2 Kawalan Nada

The Fender Monterey speaker features dedicated controls for customizing your sound:

• Treble: Adjusts the high-frequency response of the audio. Turn clockwise for brighter sound, counter-clockwise for warmer sound.
• ASAS: Adjusts the low-frequency response of the audio. Turn clockwise for more bass, counter-clockwise for less bass.
• BENTUK: A toggle switch located on the rear panel. This control modifies the overall tonal character, offering different sound profiles. Experiment with both positions to find your preferred sound.

5. Penyelenggaraan

• Pembersihan: Use a soft, dry cloth to clean the speaker's exterior. Avoid abrasive cleaners, solvents, or sprays that may damage the finish.
• Storan: Apabila tidak digunakan untuk tempoh yang lama, simpan pembesar suara di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
• Pengudaraan: Pastikan pengudaraan yang betul di sekeliling pembesar suara untuk mengelakkan terlalu panas. Jangan sekat sebarang bukaan pengudaraan.
• Pendedahan Cecair: Keep the speaker away from liquids. In case of accidental spills, immediately disconnect power and allow it to dry completely before re-use.

6. Penyelesaian masalah

Tiada Kuasa

• Pastikan kabel kuasa disambungkan dengan selamat kepada kedua-dua pembesar suara dan salur keluar dinding yang berfungsi.
• Verify the power switch on the top panel is in the "ON" position.
• Periksa sama ada alur keluar dinding berfungsi dengan memasang peranti lain.

Tiada Bunyi

• Confirm the correct audio source (Bluetooth, Mini, or RCA) is selected using the SUMBER butang.
• Tingkatkan JILID knob on the speaker and the volume on your connected audio device.
• If using Bluetooth, ensure the device is properly paired and connected. Try re-pairing if necessary.
• If using auxiliary inputs, ensure cables are fully inserted and not damaged.

Isu Berpasangan Bluetooth

• Ensure the speaker is in pairing mode (flashing Bluetooth indicator). Press the PASANGAN button if it's not flashing.
• Move your audio device closer to the speaker to ensure it's within range.
• Matikan dan hidupkan fungsi Bluetooth pada peranti audio anda.
• If the speaker was previously paired with another device, disconnect it from that device first.

7. Spesifikasi Teknikal

Figure 4: Dimensions of the Fender Monterey Bluetooth Speaker.

8. Waranti dan Sokongan

For warranty information, product registration, or technical support, please refer to the official Fender website or contact Fender customer service. Keep your proof of purchase for warranty claims.

Sumber Dalam Talian: www.fender.com