Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Maklumat Keselamatan

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Gunakan hanya kord kuasa yang dibekalkan bersama pencetak.
• Jangan dedahkan pencetak kepada air atau kelembapan yang berlebihan.
• Pastikan pencetak diletakkan di atas permukaan yang stabil dan rata.
• Elakkan menyekat bukaan pengudaraan.
• Disconnect power before cleaning or servicing the printer.
• Jangan cuba membuka atau membaiki pencetak sendiri. Rujuk kepada kakitangan servis yang berkelayakan.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Intermec PC43TB01100201 Printer Unit
• Kord Kuasa AS
• Panduan Mula Pantas (tidak disertakan dalam manual ini)
• Software/Driver CD (may vary by package)

4. Persediaan

4.1 Membongkar dan Meletakkan

1. Keluarkan pencetak dengan berhati-hati daripada pembungkusannya.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Kuasa Penyambung

1. Connect the supplied US power cord to the printer's power input.
2. Palamkan hujung kord kuasa yang lain ke dalam salur keluar elektrik yang dibumikan.

4.3 Menyambung ke Komputer

The PC43TB01100201 printer supports USB and LAN connectivity.

• Sambungan USB: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• Sambungan LAN: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Buka penutup pencetak.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Tutup penutup pencetak.

5. Arahan Operasi

5.1 Menghidupkan/Mematikan

• Untuk Menghidupkan: Press the power button located on the printer. The LCD display will illuminate.
• Untuk Mematikan: Press and hold the power button until the printer shuts down.

5.2 Menggunakan Paparan LCD

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Mencetak

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Buka perisian atau aplikasi reka bentuk label anda.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Mulakan kerja cetak.

The printer features a tear-off function for easy label separation after printing.

6. Penyelenggaraan

6.1 Membersihkan Pencetak

Pembersihan berkala membantu mengekalkan kualiti cetakan dan memanjangkan jangka hayat pencetak.

• Kepala cetak: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Penggelek Platen: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Luaran: Lap bahagian luar dengan lembut, damp kain. Jangan gunakan pembersih yang kasar.

6.2 Menggantikan Media dan Reben

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Penyelesaian masalah

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Pencetak Tidak Memberi Respons:
  • Periksa sambungan kuasa.
  • Verify USB or LAN cable connections.
  • Restart the printer and computer.
  • Pastikan pemacu pencetak dipasang dengan betul.
• Kualiti Cetakan Lemah:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Label Tidak Memberi Makan Dengan Betul:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Periksa sebarang halangan pada laluan media.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Spesifikasi

9. Waranti dan Sokongan

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Pengeluar: Intermec
• Nombor Model: PC43TB01100201
• For technical assistance, visit the official Intermec support webtapak atau hubungi perkhidmatan pelanggan mereka.