Sentry BT900

Sentry BT900 On-Neck Bluetooth Headphones User Manual

pengenalan

This manual provides instructions for the Sentry BT900 On-Neck Bluetooth Headphones. It covers setup, operation, maintenance, and troubleshooting to ensure proper use of your wireless audio device.

Kandungan Pakej

Sahkan bahawa item berikut disertakan dalam pakej produk anda:

Produk Selesaiview

Familiarize yourself with the components of your Sentry BT900 headphones.

Sentry BT900 On-Neck Bluetooth Headphones showing the neckband and earbuds

The image displays the Sentry BT900 headphones, featuring a flexible neckband designed for comfortable wear. The earbuds are connected to the neckband, and control buttons are typically located on one side of the neckband for easy access.

Komponen Utama:

Mengecas Fon Kepala

Before initial use, fully charge the headphones.

  1. Connect the small end of the USB charging cable to the Micro-USB port on the headphones.
  2. Sambungkan hujung kabel pengecas USB yang lebih besar kepada sumber kuasa USB (cth., port USB komputer, penyesuai dinding USB).
  3. Penunjuk LED akan menyala semasa pengecasan dan bertukar warna atau padam apabila pengecasan selesai.
  4. Pengecasan penuh biasanya mengambil masa kira-kira 2-3 jam.

Berpasangan dengan Peranti Bluetooth

Follow these steps to connect your headphones to a Bluetooth-enabled device:

  1. Ensure the headphones are turned off and fully charged.
  2. Tekan dan tahan butang Butang kuasa/berbilang fungsi for approximately 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
  3. Pada peranti anda yang didayakan Bluetooth (telefon pintar, tablet, dsb.), navigasi ke tetapan Bluetooth.
  4. Dayakan Bluetooth dan cari peranti yang tersedia.
  5. Select 'Sentry BT900' from the list of found devices.
  6. Once paired, the LED indicator on the headphones will typically flash blue slowly or turn solid blue.
  7. If a passcode is requested, enter '0000'.

Mengendalikan Fon Kepala

Hidupkan/Mati Kuasa:

Main Balik Muzik:

Pengurusan Panggilan:

Kawalan Kelantangan:

Penyelenggaraan

Pembersihan:

Gently wipe the headphones and earbuds with a soft, dry cloth. For ear tips, remove them and clean with a mild soap solution if necessary, then rinse and dry completely before reattaching.

Storan:

Simpan fon kepala di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau. Elakkan meletakkan objek berat di atasnya.

Penjagaan Bateri:

To prolong battery life, avoid fully discharging the battery frequently. Charge the headphones regularly, even if not in use for extended periods.

Menyelesaikan masalah

Fon kepala tidak boleh dihidupkan:

Ensure the headphones are fully charged. Connect to a power source and attempt to power on after a few minutes.

Tidak boleh berpasangan dengan peranti:

Ensure the headphones are in pairing mode (flashing red and blue LED). Make sure Bluetooth is enabled on your device and it is within range (typically 10 meters). Turn off and on both the headphones and the device, then try pairing again.

Tiada bunyi atau kelantangan rendah:

Periksa tahap kelantangan pada kedua-dua fon kepala dan peranti anda yang disambungkan. Pastikan fon kepala dipasangkan dan disambungkan dengan betul. Cuba pasangkan semula fon kepala.

Kualiti bunyi yang lemah:

Ensure there are no obstructions between the headphones and your device. Move closer to your device. Check for interference from other wireless devices.

Isu pengecasan:

Verify the USB cable is securely connected to both the headphones and the power source. Try a different USB cable or power source.

Spesifikasi

Waranti dan Sokongan

For warranty information, please refer to the documentation included with your purchase or contact Sentry customer support.

Simpan bukti pembelian anda untuk tuntutan waranti.