Timeguard TS900N Immersion Controller Timeswitch User Manual

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Timeguard TS900N 24-hour immersion heater timeswitch. Please read this document thoroughly before attempting installation or use to ensure safe and correct operation. Keep this manual for future reference.

Maklumat Keselamatan Penting

Pemasangan hanya boleh dijalankan oleh juruelektrik yang berkelayakan mengikut peraturan pendawaian semasa.
Always disconnect the mains supply before commencing any installation, maintenance, or wiring work.
Ensure all electrical connections are secure and correctly wired to prevent electric shock or fire hazards.
Do not exceed the maximum load rating of 13A (3kW) for this device.
This device is designed for indoor use only and must not be exposed to moisture or extreme temperatures.
Jangan cuba mengubah suai atau membaiki unit ini sendiri. Rujuk semua servis kepada kakitangan yang berkelayakan.

Ciri-ciri Produk

The Timeguard TS900N is a reliable 24-hour mechanical timeswitch designed for efficient control of immersion heaters.

24-Hour Control: Allows setting of multiple ON/OFF periods over a 24-hour cycle.
Adjustable Switching Intervals: Features a minimum switching interval of 30 minutes, adjustable in 15-minute steps.
Kapasiti Beban Tinggi: Suitable for resistive loads up to 13 Amperes (3 kilowatts).
Tetapan Mudah: User-friendly setting pins facilitate straightforward programming.
Pembatalan Manual: Includes a manual override switch for temporary control, bypassing programmed settings.

Kandungan Pakej

Sila sahkan bahawa pakej anda mengandungi item berikut:

1 x Timeguard TS900N Immersion Controller Timeswitch
1 x Manual Arahan (dokumen ini)

Persediaan dan Pemasangan

Note: Installation must be performed by a qualified electrician and comply with all local and national wiring regulations.

Penyediaan: Before beginning, ensure the mains power supply to the immersion heater circuit is completely switched off at the consumer unit (fuse box).
Pemasangan: Select a suitable, dry indoor location for the timeswitch, typically near the immersion heater or consumer unit. Secure the timeswitch to the wall using appropriate screws and wall plugs.
Pendawaian:
- Connect the incoming Live (L) wire from the mains supply to the terminal marked 'L IN'.
- Connect the incoming Neutral (N) wire from the mains supply to the terminal marked 'N IN'.
- Connect the Earth (E) wire to the Earth terminal.
- Connect the Live (L) wire going to the immersion heater to the terminal marked 'L OUT'.
- Connect the Neutral (N) wire going to the immersion heater to the terminal marked 'N OUT'.
Refer to the wiring diagram provided on the unit's internal casing or in the full installation guide for precise connections.
Sambungan Selamat: Ensure all terminal screws are tightened securely to prevent loose connections and overheating.
Tutup Casing: Carefully replace the front cover of the timeswitch, ensuring it is properly seated and secured.
Hidupkan kuasa: Restore mains power supply to the circuit at the consumer unit.

Timeguard TS900N Immersion Controller Timeswitch front view

Rajah 1: Depan view of the Timeguard TS900N Immersion Controller Timeswitch, showing the dial, setting pins, and manual override switch.

Arahan Operasi

Menetapkan Masa Semasa: Rotate the outer dial clockwise until the current time aligns with the 'TIME' arrow indicator. The dial is marked in 24-hour format (e.g., 13 for 1 PM, 18 for 6 PM).
Programming ON/OFF Periods:
- The dial's circumference is divided into segments, with each segment representing 15 minutes.
- To set an 'ON' period, push the corresponding segment pins outwards.
- To set an 'OFF' period, ensure the corresponding segment pins are pushed inwards.
- Untuk example, to have the immersion heater ON from 07:00 AM to 08:30 AM, push out all pins between the 07:00 and 08:30 markings on the dial.
Pembatalan Manual: The timeswitch includes a manual override switch, typically a slider or button, with positions such as 'ON', 'AUTO/TIMER', and 'OFF'.
- ON: Keeps the immersion heater continuously ON, overriding any programmed settings.
- AUTO/TIMER: Allows the timeswitch to operate according to the programmed ON/OFF settings. This is the standard operating mode.
- MATI: Keeps the immersion heater continuously OFF, overriding any programmed settings.
Consult the specific markings on your unit for exact override positions and their functions.

Penyelenggaraan

Pembersihan: Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the unit or cause electrical hazards.
Pemeriksaan: Periodically inspect the timeswitch for any signs of physical damage, loose wiring, or discoloration. If any issues are observed, immediately disconnect power and consult a qualified electrician.
Tiada Bahagian Boleh Diservis Pengguna: The internal components of the TS900N are not user-serviceable. Do not attempt to open the unit beyond accessing the wiring terminals during installation.

Menyelesaikan masalah

Masalah	Kemungkinan Punca	Penyelesaian
Immersion heater not turning ON/OFF as programmed.	Incorrect current time setting; Pins not pushed out/in correctly; Manual override engaged.	Check and adjust the current time setting; Ensure pins are correctly set for desired ON/OFF periods; Set the manual override switch to 'AUTO' or 'TIMER'.
No power to the timeswitch.	Mains power supply is off; Loose wiring connection; Blown fuse or tripped circuit breaker.	Check the mains power supply to the circuit; Verify all wiring connections (consult a qualified electrician if unsure); Check the fuse or circuit breaker at the consumer unit.
Timeswitch making unusual noises (e.g., grinding, buzzing).	Internal mechanical fault.	Immediately disconnect power to the unit. Do not attempt to repair. Contact a qualified electrician or Timeguard customer support.

Spesifikasi

model: TS900N
Jenama: Penjaga Tim
Voltage: 230V AC, 50Hz
Muatan Maks: 13A (3kW resistive)
Switching Intervals: 30 minutes minimum, adjustable in 15-minute steps
Bahan: plastik
warna: putih
Dimensi Produk (lebih kurang): 19.68"D x 19.68"W x 19.68"H (Note: These dimensions may refer to packaging. Actual unit dimensions are typically smaller.)
Berat Barang: 100 Gram (3.53 auns)
Bateri Diperlukan: Tidak
Komponen yang Disertakan: Timeswitch unit only.

Waranti dan Sokongan

Timeguard products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the official Timeguard webtapak atau kad jaminan yang disertakan dengan pembelian anda. Simpan bukti pembelian anda untuk sebarang tuntutan jaminan.

For technical assistance, troubleshooting beyond this manual, or to inquire about spare parts, please contact Timeguard customer support.

Timeguard Contact Information:

Webtapak: www.timeguard.com
Perkhidmatan Pelanggan: Rujuk kepada website for regional contact details and support options.

	TS930 24 Hour Segment Immersion Heater Timeswitch - Operating Instructions & Specifications Detailed operating instructions and specifications for the Timeguard TS930 24-hour segment immersion heater timeswitch. Learn how to set ON/OFF periods, use manual override, and understand its technical capabilities for domestic appliances.
	Suis Timeswitch Digital Timeguard NTTHDA, NTTHDS, NTTHDM: Arahan Pemasangan dan Pengendalian Comprehensive guide for installing and operating Timeguard's 24 Hour / 7 Day Compact Digital Heavy Duty Timeswitches (models NTTHDA, NTTHDS, NTTHDM). Covers safety, technical specifications, installation steps for different versions, connection diagrams, battery, reset, clock setting, programming, loop functions, override, boost, and guarantee information.
	Arahan Pemasangan dan Pengendalian Suis Waktu Elektronik 24 Jam/7 Hari Timeguard TG77 Arahan pemasangan dan pengendalian yang komprehensif untuk Timeguard TG77 24 Jam/7 Hari Electronic Timeswitch, meliputi persediaan, pengaturcaraan, keselamatan dan spesifikasi.
	Arahan Pemasangan dan Pengendalian Suis Masa Digital Timeguard NTT06/NTT07 Comprehensive installation and operating instructions for the Timeguard NTT06 (24 Hour) and NTT07 (7 Day) digital time switches. Learn how to install, program, and use your digital timer for domestic applications.
	Timeguard FSTWIFITUTGV IP66 Wi-Fi Controlled Fused Spur Timeswitch Arahan Pemasangan & Operasi Arahan pemasangan dan pengendalian yang komprehensif untuk Timeguard FSTWIFITUTGV IP66 Wi-Fi Controlled Fused Spur Timeswitch, termasuk spesifikasi teknikal, garis panduan keselamatan dan prosedur pemasangan apl.
	Timeguard FST & NTT Series Timers FAQ Frequently Asked Questions for Timeguard FST and NTT series timers, covering troubleshooting for Fused Spur, Slimline, and WiFi models. Includes setup and operational guidance.