PreSonus AIR10 Active Loudspeaker Instruction Manual

1. Pengenalan

The PreSonus AIR10 is a compact and lightweight 2-way active sound-reinforcement loudspeaker designed to deliver rich low-end and natural high-frequency extension. Its enclosure is engineered for portability and versatility, fitting easily into various setups.

Key features of the AIR10 include:

• 10-inch custom low-frequency driver with 2-inch voice coil.
• 1-inch high-frequency compression driver.
• 90° horizontal dispersion x 60° vertical dispersion.
• Hybrid 1,200W power amplifier configuration (Class D for low-end, Class AB for high-frequency).
• Onboard mixer with two combo XLR and ¼” inputs, plus a stereo 1/8” input.
• Easy-to-use Digital Signal Processing (DSP) performance presets.

2. Maklumat Keselamatan

Before operating your PreSonus AIR10 loudspeaker, please read and understand all safety instructions. Retain this manual for future reference.

• Sumber Kuasa: Connect the unit only to a power supply of the type described in this manual or on the unit.
• Pembumian: Pastikan unit dibumikan dengan betul untuk mengelakkan kejutan elektrik.
• Pengudaraan: Jangan menyekat bukaan pengudaraan. Pasang mengikut arahan pengeluar.
• Air dan Kelembapan: Jangan gunakan peralatan ini berhampiran air atau dedahkannya kepada titisan atau percikan.
• haba: Jangan pasang berhampiran mana-mana sumber haba seperti radiator, daftar haba, dapur, atau radas lain (termasuk amppenghidup) yang menghasilkan haba.
• Servis: Rujuk semua perkhidmatan kepada pegawai perkhidmatan yang berkelayakan. Servis diperlukan apabila alat telah rosak dengan cara apa pun.
• Perlindungan Pendengaran: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use caution when setting volume levels.

3. Persediaan

Proper setup ensures optimal performance and safety for your AIR10 loudspeaker.

3.1 Membongkar

Carefully remove the AIR10 from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. If damage is found, contact your dealer or PreSonus immediately.

3.2 Penempatan dan Pemasangan

The AIR10 is designed for versatile placement, including front-of-house (FOH), floor wedge monitoring, stand mounting, bracket mounting, or flown installations. Location presets optimize performance for these different configurations.

Rajah 1: Depan view of the PreSonus AIR10 Active Loudspeaker.

Rajah 2: Sisi view of the PreSonus AIR10 Active Loudspeaker, showing integrated handles.

3.3 Sambungan Kuasa

Connect the provided power cord to the AC inlet on the rear panel of the AIR10 and then to a suitable grounded power outlet. Ensure the voltage selector switch matches your local power supply before powering on the unit.

3.4 Sambungan Input

The AIR10 features an onboard mixer with various input options:

• Mic/Line 1 & 2: Two combo XLR and ¼” inputs for microphones or line-level sources.
• Aux In: A stereo 1/8” input for connecting portable media players or other consumer-level devices.
• Campurkan: An XLR output for sending the mixed signal to another AIR series loudspeaker or a subwoofer.

Figure 3: Rear panel of the PreSonus AIR10, showing input/output connections, level controls, DSP display, and power switch.

4. Beroperasi

The AIR10 is designed for straightforward operation with powerful DSP controls.

4.1 Menghidupkan/Mematikan

After connecting the power cord, locate the power switch on the rear panel. Flip the switch to the 'ON' position. The front panel LED will illuminate to indicate power. Always power on your AIR10 after connecting all audio sources and power off before disconnecting.

4.2 Level Controls

Adjust the individual LEVEL knobs for Mic/Line 1 and Mic/Line 2 to set the input gain for your sources. The MASTER VOL knob controls the overall output level of the loudspeaker.

4.3 DSP Performance Presets

The AIR10 features easy-to-use DSP presets to optimize its performance for various applications. These presets include options for front-of-house use, floor wedge placement, music playback, enhanced low-end warmth, and improved speech intelligibility. Use the DSP button and display on the rear panel to navigate and select the appropriate preset for your environment.

4.4 Kawalan EQ

The onboard EQ controls allow you to compensate for room anomalies and fine-tune the sound. Access these controls via the DSP menu to adjust frequency response as needed for your specific acoustic space.

4.5 Video Tamatview

5. Penyelenggaraan

Regular maintenance helps prolong the life and performance of your AIR10 loudspeaker.

• Pembersihan: Use a soft, dry cloth to clean the exterior of the loudspeaker. Do not use abrasive cleaners, waxes, or solvents.
• gril: Periodically check the front grille for dust or debris accumulation. Gently clean with a soft brush or vacuum if necessary.
• Storan: Apabila tidak digunakan untuk tempoh yang lama, simpan pembesar suara di persekitaran yang kering dan terkawal suhunya, sebaik-baiknya di dalam pembungkusan asalnya atau penutup pelindung.

6. Penyelesaian masalah

This section addresses common issues you might encounter with your AIR10 loudspeaker.

6.1 Tiada Kuasa

• Check that the power cord is securely connected to both the loudspeaker and the power outlet.
• Sahkan bahawa soket kuasa aktif.
• Pastikan voltage selector switch on the rear panel is set correctly for your region.
• Check the fuse on the rear panel. Replace if blown with a fuse of the correct type and rating.

6.2 Tiada Bunyi

• Confirm the loudspeaker is powered on and the front LED is illuminated.
• Check all audio cable connections from your source to the AIR10 inputs.
• Ensure the input LEVEL knobs and the MASTER VOL knob are turned up.
• Verify that your audio source is active and producing sound.
• If using the Mix Out, ensure the connected device is receiving a signal and its volume is adjusted.

6.3 Hissing or Noise

• Reduce the input gain (LEVEL knobs) if the input signal is too strong.
• Pastikan semua kabel berada dalam keadaan baik dan dilindungi dengan betul.
• Try connecting the loudspeaker to a different power outlet to rule out ground loop issues.
• Disconnect all inputs and listen for the noise. If the noise persists, the issue may be internal.

7. Spesifikasi

8. Apa yang ada di dalam Kotak

Your PreSonus AIR10 package should contain the following items:

• PreSonus AIR10 10" 2-Way Active Sound-Reinforcement Loudspeaker
• Kord Kuasa
• Product Documentation (including this manual)

9. Waranti dan Sokongan

PreSonus provides a limited warranty for the AIR10 loudspeaker. For detailed warranty information, please refer to the warranty card included with your product or visit the official PreSonus webtapak.

For technical support, product registration, or to access additional resources, please visit the PreSonus support page or contact their customer service directly. Keeping your product registered can facilitate warranty claims and support.