JOCCA 6285U UV Lamp Manual Arahan

1. Produk Lebihview

The JOCCA 6285U UV Lamp is a specialized device designed for curing nail polish and gel, suitable for both manicures and pedicures. It features four UV bulbs to ensure quick and even drying, providing professional results at home.

This image shows the JOCCA 6285U UV Lamp, a white, compact device designed for curing nail polish and gel. It features an opening for hands or feet and houses four UV bulbs.

2. Arahan Keselamatan Penting

Sila baca dan fahami semua arahan keselamatan sebelum menggunakan perkakas ini. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.

• Baca semua arahan: Biasakan diri anda dengan ciri-ciri operasi dan keselamatan sebelum penggunaan pertama.
• Keselamatan Elektrik: Jangan kendalikan lamp with a damaged cord or plug. Keep the power cord away from heated surfaces. Do not immerse the lamp dalam air atau cecair lain.
• UV Light Exposure: Avoid direct eye exposure to the UV light. Prolonged exposure to UV light can be harmful to skin and eyes. Use in a well-ventilated area.
• Kanak-kanak dan Haiwan Kesayangan: Jauhkan perkakas ini daripada capaian kanak-kanak dan haiwan peliharaan. Ini bukan mainan.
• Storan: Cabut plag lamp when not in use and store it in a dry, safe place.
• Penyelenggaraan: Do not attempt to service or repair the unit yourself. Refer all servicing to qualified personnel.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• 1 x JOCCA 6285U UV Lamp Unit
• 4 x UV Bulbs
• 1 x Manual Arahan (dokumen ini)

4. Persediaan

Follow these steps to set up your UV lamp:

1. Bongkar: Keluarkan UV l dengan berhati-hatiamp and all components from the packaging.
2. Masukkan Mentol: Locate the bulb sockets inside the lamp. Gently insert each of the 4 UV bulbs into its designated socket. Ensure they are securely seated and properly aligned.
3. penempatan: Letakkan lamp on a stable, flat, and dry surface, away from water sources.
4. Sambungkan Kuasa: Plug the power cable into the lamp's power input, then connect the other end to a suitable electrical outlet.

5. Arahan Operasi

To use your JOCCA UV Lamp for nail curing:

1. Penyediaan: Ensure your nails are prepared and the nail polish or gel has been applied according to the product's instructions.
2. Kedudukan: Carefully place your hand or foot inside the lamp, ensuring that all nails are positioned directly under the UV bulbs for even exposure.
3. Hidupkan kuasa: Locate the power switch (usually on the top or side of the unit) and turn the lamp HIDUP.
4. Masa Pengawetan: Allow the nails to cure for the recommended duration specified by your nail polish or gel manufacturer. Curing times can vary significantly between products.
5. Matikan: Once the curing process is complete, turn the lamp OFF using the power switch and carefully remove your hand or foot.
6. Ulang: Repeat the process for additional coats or the other hand/foot as needed.

6. Penyelenggaraan

Proper maintenance ensures the longevity and optimal performance of your UV lamp.

Pembersihan

• Sentiasa putuskan sambungan lamp dari sumber kuasa sebelum membersihkan.
• Wipe the exterior of the lamp dengan lembut, kering, atau sedikit keringamp kain.
• Jangan gunakan pembersih yang melelas, pelarut atau bahan kimia yang keras, kerana ini boleh merosakkan permukaan.
• Jangan sekali-kali merendam unit ke dalam air atau cecair lain.

Penggantian Mentol

If a UV bulb stops working or its effectiveness diminishes:

1. Putuskan Kuasa: Pastikan lamp is unplugged from the electrical outlet.
2. Keluarkan Mentol Lama: Carefully remove the non-functional UV bulb by gently pulling or twisting it out of its socket (depending on the bulb type).
3. Masukkan Mentol Baharu: Insert a new, compatible UV bulb into the empty socket. Ensure it is securely fitted.
4. Keserasian: Only use replacement bulbs specified by JOCCA for the 6285U model to ensure proper function and safety.

7. Penyelesaian masalah

If you encounter issues with your JOCCA UV Lamp, rujuk kepada masalah dan penyelesaian biasa berikut:

• Lamp tidak dihidupkan:
  • Check if the power cable is securely plugged into both the lamp and a functional electrical outlet.
  • Pastikan suis kuasa berada dalam kedudukan 'HIDUP'.
  • Verify that all UV bulbs are correctly installed and not loose.
• Nail polish/gel is not curing:
  • Confirm that you are using a nail polish or gel product that specifically requires UV light for curing.
  • Check if all UV bulbs are working. Replace any non-functional bulbs.
  • Ensure the curing time is sufficient as per the nail product's instructions. Some products require longer exposure.
• Pengawetan tidak sekata:
  • Ensure your hand or foot is positioned correctly inside the lamp, allowing all nails to receive even exposure to the UV light.
  • Check for any obstructions blocking the UV light from reaching certain nails.

8. Spesifikasi

9. Waranti dan Sokongan

For detailed warranty information, product registration, or customer support, please refer to the warranty card included with your purchase or visit the official JOCCA website. You may also contact JOCCA customer service directly for assistance with any product-related inquiries or issues.

Sila simpan bukti pembelian anda untuk tuntutan waranti.