pengenalan
The Intermec PB51 is a rugged, 4-inch direct thermal mobile receipt printer designed for demanding field service, route accounting, and point-of-service applications. It offers fast, reliable printing performance to enhance productivity for mobile workers.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB51 printer.
Rajah 1: Depan view of the Intermec PB51 mobile receipt printer. A receipt is partially ejected from the front slot, displaying "Transaction Receipt", "Transaction #: 4530902261009", "Customer #: 057-806-730", and "Date: 2/26/2009 Time: 12:08:43 PM". The printer features a dark gray casing with a blue button on the left side and the "Intermec PB51" logo on the top panel.
Persediaan
1. Membongkar dan Pemeriksaan
- Tanggalkan pencetak dan semua aksesori daripada pembungkusan dengan berhati-hati.
- Sahkan bahawa semua komponen yang disenaraikan dalam slip pembungkusan ada.
- Inspect the printer for any visible damage. If damage is found, contact your supplier immediately.
2. Pemasangan dan Pengecasan Bateri
- Pastikan pencetak dimatikan.
- Locate the battery compartment on the printer.
- Insert the battery, ensuring proper alignment with the contacts.
- Tutup petak bateri dengan selamat.
- Connect the AC adapter to the printer and a power outlet. The battery indicator light will show charging status. Allow the battery to fully charge before first use.
3. Memuatkan Kertas Termal
- Buka penutup petak kertas.
- Insert the thermal paper roll with the print-side facing the print head.
- Pull a small amount of paper out past the print mechanism.
- Close the paper compartment cover firmly until it latches.
- The printer's paper sensors will detect the paper, minimizing lost transactions.
4. Connectivity Setup (Bluetooth / USB / Serial)
- Bluetooth: Turn on the printer and enable Bluetooth on your host device (e.g., smartphone, tablet, or computer). Cari untuk available devices and select the PB51. Pair using the default PIN (refer to the printer's display or documentation for the specific PIN).
- USB: Connect the printer to your host device using a standard USB cable. Install the necessary printer drivers on your host device if prompted.
- bersiri: Connect the printer to your host device using a serial cable. Configure the serial port settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.
Arahan Operasi
1. Menghidupkan/Mematikan
- Untuk menghidupkan, tekan dan tahan butang kuasa sehingga paparan menyala.
- To power off, press and hold the power button until the display indicates shutdown, then release.
2. Printing a Receipt
- Ensure the printer is powered on and connected to your host device.
- Open the application on your host device that generates receipts or invoices.
- Initiate the print command from your application. The PB51 is designed for 20-30% faster time-to-receipt printing.
- The printer will automatically feed and print the receipt.
- Tear off the receipt along the serrated edge.
3. Menggunakan Paparan LCD
The standard LCD display provides important information about the printer's status, battery level, connectivity, and error messages. Use the navigation buttons (if present) to scroll through menu options and settings.
Penyelenggaraan
1. Membersihkan Kepala Cetak
- Power off the printer and disconnect it from any power source.
- Buka petak kertas.
- Gently wipe the print head surface with a lint-free cloth dampditambah dengan isopropil alkohol.
- Biarkan kepala cetak kering sepenuhnya sebelum menutup penutup dan menghidupkan pencetak.
- Perform this cleaning regularly, especially if print quality degrades.
2. Penjagaan Bateri
- Untuk memaksimumkan hayat bateri, elakkan daripada kerap mencas sepenuhnya bateri.
- Store the printer and battery in a cool, dry place when not in use for extended periods.
- Use only genuine Intermec replacement batteries.
3. Pembersihan Am
Lap bahagian luar pencetak dengan lembut, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquid enters the printer's openings.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pencetak tidak dihidupkan | Low or dead battery; faulty power adapter; loose battery connection. | Charge the battery; check power adapter connection; re-seat the battery. |
| Tiada keluaran cetakan | No paper; paper loaded incorrectly; connectivity issue; print head dirty. | Load paper correctly; check Bluetooth/USB/Serial connection; clean print head. |
| Kualiti cetakan buruk | Dirty print head; incorrect paper type; low battery. | Clean print head; ensure thermal paper is used; charge battery. |
| Isu ketersambungan | Incorrect pairing; driver issues; out of range. | Re-pair Bluetooth; reinstall drivers; move closer to host device. |
If the problem persists after attempting these solutions, please contact Intermec customer support.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nama Model | PB51B33004100 |
| Teknologi Percetakan | Terma Terus |
| Output Pencetak | Monokrom |
| Saiz Media Maksimum | 4 inci |
| Teknologi Ketersambungan | USB, Serial, Bluetooth |
| Berat Barang | 42 Ounces (approx. 2.63 lbs) |
| Dimensi Pakej | 10.2 x 10 x 5 inci |
| Jenis Pengawal | Android (serasi) |
| Pengeluar | Intermec |
Waranti dan Sokongan
Specific warranty information for the Intermec PB51 printer is not available in this document. Please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) webtapak untuk terma dan syarat jaminan terperinci.
For technical support, service, or to purchase accessories, please contact your authorized Intermec/Honeywell dealer or visit their official support portal.
