1. Pengenalan
This manual provides essential information for the safe and efficient operation of your Mastervolt ChargeMaster Plus 12/35-3 Battery Charger. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage to the unit or connected systems.
The Mastervolt ChargeMaster Plus 12/35-3 is an advanced automatic battery charger designed for marine and automotive applications, providing optimal charging for various battery types.
2. Maklumat Keselamatan
AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.
- Always disconnect power before installing or servicing the charger.
- Pastikan pengudaraan yang betul di sekeliling pengecas untuk mengelakkan terlalu panas.
- Do not expose the charger to rain, spray, or excessive moisture.
- This device is designed for indoor use in a protected environment.
- Hanya kakitangan yang berkelayakan harus melakukan pemasangan dan penyelenggaraan.
- Jangan kendalikan pengecas jika ia telah rosak dalam apa jua cara.
- Keep flammable materials away from the charger.
For detailed safety guidelines, refer to local electrical codes and marine standards.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Mastervolt ChargeMaster Plus 12/35-3 Battery Charger Unit
- Perkakasan Pemasangan (skru, pencuci)
- Manual Pengguna (dokumen ini)
- Kad Waranti
4. Persediaan dan Pemasangan
4.1 Memasang Pengecas
The ChargeMaster Plus 12/35-3 should be mounted in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for airflow.
- Select a suitable mounting location that can support the weight of the charger.
- Use the provided mounting template (if applicable) or measure the mounting holes on the back of the unit.
- Secure the charger firmly to a solid surface using appropriate screws and fasteners.
Rajah 1: Belakang view of the Mastervolt ChargeMaster Plus 12/35-3, illustrating the integrated mounting brackets for secure installation.
4.2 Sambungan Elektrik
All electrical connections must comply with local regulations and standards. Consult a qualified electrician if unsure.
- Connect the AC input cable to a grounded power source.
- Connect the DC output cables to your battery bank(s). Ensure correct polarity (positive to positive, negative to negative). The ChargeMaster Plus 12/35-3 supports multiple battery banks.
- Verify all connections are secure and free from corrosion.
Rajah 2: Depan view of the Mastervolt ChargeMaster Plus 12/35-3, showing the control panel and connection points.
Rajah 3: Bahagian atas bersudut view of the Mastervolt ChargeMaster Plus 12/35-3, highlighting the ventilation grilles and overall compact design.
5. Arahan Operasi
5.1 Menghidupkan/Mematikan
Once all connections are made, connect the charger to the AC power source. The charger will automatically initiate its startup sequence.
- To power on: Ensure AC power is supplied. The power indicator light will illuminate.
- To power off: Disconnect the AC power source.
5.2 Proses Pengecasan
The ChargeMaster Plus 12/35-3 features an intelligent 3-stage+ charging process to optimize battery life and performance:
- Pukal Stage: Delivers maximum current to rapidly charge the battery to approximately 80%.
- Penyerapan Stage: Charges the battery to 100% at a constant voltage, gradually reducing current.
- Terapung Stage: Mengekalkan bateri pada cas penuh dengan voltan yang rendah dan malartage, preventing overcharging.
- Penyelenggaraan Stage: Periodically checks battery voltage and initiates a new charging cycle if needed.
The charger automatically detects the battery type and condition to apply the most suitable charging profile. Refer to the display indicators for charging status.
6. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your Mastervolt ChargeMaster Plus 12/35-3.
- Pembersihan: Periodically wipe the exterior of the charger with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Pengudaraan: Ensure that the ventilation openings are clear of dust and debris. Blocked vents can lead to overheating.
- Sambungan: Annually inspect all electrical connections for tightness and signs of corrosion. Tighten any loose connections and clean corroded terminals.
- Persekitaran: Confirm the charger remains in a dry, protected environment.
CAUTION: Do not open the charger casing. Tiada bahagian yang boleh diservis pengguna di dalamnya.
7. Penyelesaian masalah
This section addresses common issues you might encounter with your charger. For problems not listed here, contact Mastervolt support.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pengecas tidak dihidupkan | No AC input power; Blown fuse; Faulty connection. | Check AC power source and circuit breaker. Inspect input cable and connections. |
| Bateri tidak dicas | Incorrect battery connection; Battery deeply discharged; Faulty battery. | Verify DC output connections and polarity. Allow time for deeply discharged batteries to recover. Test battery condition. |
| Overheating / Shutdown | Pengudaraan tidak mencukupi; Beban berlebihan. | Ensure clear airflow around the unit. Reduce load if possible. Allow unit to cool down. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Mastervolt |
| Nama Model | ChargeMaster Plus 12/35-3 (Model Number: 44010250) |
| Keluaran Nominal Voltage | 12 Volts DC (Requires AC input power, not specified in data) |
| Arus Output Maksimum | 25 Amps |
| Berat Barang | 5.5 Paun (lebih kurang 2.5 kg) |
| Dimensi Item (LxWxH) | 5.2 x 2.36 x 9.21 inci (lebih kurang 13.2 x 6 x 23.4 cm) |
| bahan | plastik |
| warna | No Color (referring to the product's primary color, which is teal/green) |
| Tarikh Tersedia Pertama | 14 Februari 2015 |
9. Waranti dan Sokongan
The Mastervolt ChargeMaster Plus 12/35-3 comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Mastervolt webtapak.
For technical support, service, or spare parts, please contact Mastervolt customer service or your authorized dealer. Have your product model number (44010250) and serial number ready when contacting support.
Mastervolt Support: www.mastervolt.com/support
