Joycare JC-436

Joycare JC-436 Electronic Glass Body Composition Scale User Manual

Model: JC-436

1. Pengenalan

Thank you for choosing the Joycare JC-436 Electronic Glass Body Composition Scale. This manual provides essential information for the safe and effective use of your new scale. Please read it thoroughly before first use and keep it for future reference. This scale is designed to measure body weight, body fat percentage, peratus air badantage, dan jisim otot.

2. Maklumat Keselamatan Penting

3. Kandungan Pakej

Sila semak kandungan pakej untuk memastikan semua item ada:

4. Produk Lebihview

The Joycare JC-436 scale features a sleek glass platform with integrated electrodes for body composition analysis and a clear digital display.

Joycare JC-436 Electronic Glass Body Composition Scale

Rajah 1: Joycare JC-436 Electronic Glass Body Composition Scale. This image shows the top view of the scale, highlighting its glass weighing platform and digital display.

Komponen Utama:

5. Persediaan

5.1 Pemasangan Bateri

  1. Balikkan penimbang untuk mengakses petak bateri di bahagian bawah.
  2. Buka penutup petak bateri.
  3. Masukkan bateri logam litium CR2032 yang disertakan, memastikan kekutuban yang betul (+/-).
  4. Tutup penutup petak bateri dengan selamat.

5.2 Pemilihan Unit

After battery installation, you can select your preferred unit of measurement:

5.3 Initializing the Scale

Before first use or after moving the scale, it is recommended to initialize it:

  1. Letakkan penimbang pada permukaan yang keras dan rata.
  2. Step on the scale briefly with one foot, then step off. The display will show '0.0' or a similar reading and then turn off. This indicates the scale is calibrated and ready for use.

6. Arahan Operasi

6.1 Pengukuran Berat Asas

  1. Letakkan penimbang pada permukaan yang keras dan rata.
  2. Step onto the scale barefoot and stand still, distributing your weight evenly.
  3. The display will show your weight. It will flash a few times and then lock on the final reading.
  4. Step off the scale. The display will remain on for a few seconds before automatically turning off.

6.2 Body Composition Measurement (Body Fat, Water, Muscle Mass)

For accurate body composition readings, ensure your feet are clean, dry, and make direct contact with the metal electrodes on the scale's surface.

  1. Letakkan penimbang pada permukaan yang keras dan rata.
  2. Melangkah ke penimbang tanpa alas kaki dan berdiri diam.
  3. The scale will first display your weight.
  4. After a few seconds, the scale will begin to analyze your body composition. The display may show a '0000' or '----' pattern as it processes.
  5. Once the analysis is complete, the scale will cycle through your readings: weight, body fat percentage, peratus air badantage, and muscle mass percentage.
  6. Step off the scale. The readings will remain on the display for a short period before the scale turns off.

Nota: For consistent results, take measurements at the same time of day, preferably in the morning before meals or exercise.

7. Penyelenggaraan

7.1 Pembersihan

7.2 Penyimpanan

7.3 Penggantian Bateri

8. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
No display / 'Lo' on displayBateri lemah atau dipasang dengan salah.Replace the battery (CR2032) or ensure it is installed with correct polarity.
Bacaan berat yang tidak tepatScale is on an uneven or soft surface; not initialized; moved after last use.Place scale on a hard, flat surface. Initialize the scale (step on briefly, then off). Ensure you stand still.
'Err' or 'O-Ld' on displayOverload. The weight exceeds the maximum capacity (180 kg).Step off the scale. Do not exceed the maximum weight capacity.
Body composition readings are inconsistent or not displayed.Feet are not making proper contact with electrodes; feet are wet or dirty; user profile not set up (if applicable for advanced models).Ensure bare, clean, dry feet are in full contact with the electrodes. Stand still during measurement.

9. Spesifikasi

10. Waranti dan Sokongan

For warranty information, please refer to the warranty card included with your purchase or contact your retailer. If you experience any issues with your Joycare JC-436 scale that cannot be resolved using the troubleshooting guide, please contact Joycare customer support for assistance. Contact details can typically be found on the product packaging or the official Joycare webtapak.