pengenalan
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the Testo 400563 4354 IAQ Kit. This device is designed for simple and intuitive operation for reading, saving, and analyzing ventilation and indoor air quality parameters, including Relative Humidity (RH), Temperature, Carbon Dioxide (CO2), and Barometric Pressure.
Maklumat Keselamatan
Please read this section carefully before operating the device. Failure to comply with these instructions may result in injury or damage to the instrument.
- Always operate the device within its specified operating temperature and humidity ranges.
- Do not expose the device to extreme temperatures, direct sunlight, or corrosive environments.
- Elakkan daripada menjatuhkan atau meletakkan peranti kepada kesan yang kuat.
- Only use specified batteries and dispose of them properly.
- Jangan cuba membuka atau membaiki peranti sendiri. Rujuk semua servis kepada kakitangan yang berkelayakan.
- Pastikan peranti bersih dan bebas daripada habuk dan serpihan.
Produk Selesaiview
The Testo 400563 4354 IAQ Kit is a versatile instrument for environmental measurements. Familiarize yourself with its components:
Rajah 1: Testo 435-4 IAQ Meter. This image displays the handheld meter, featuring a large digital display at the top showing readings like "1037 ppm" and "934.4 m³/h". Below the screen are several control buttons: three orange circular buttons at the top, followed by two grey arrow buttons (up and down), another grey circular button, and finally a power button with a power symbol. The device has a sleek, ergonomic design with a black body and silver-colored accents.
Komponen Utama:
- paparan: Large LCD for clear reading of measurement values and menu navigation.
- Butang Kawalan: Intuitive buttons for power, navigation, selection, and function activation.
- Input Sensor: Port for connecting various probes (e.g., CO2, humidity, temperature).
- Petak Bateri: Located at the rear for power supply.
Persediaan
1. Pemasangan Bateri:
- Cari penutup petak bateri di bahagian belakang peranti.
- Open the cover by sliding or unscrewing it (refer to specific model instructions if screws are present).
- Insert the required batteries (e.g., AA or AAA, typically 3 or 4) ensuring correct polarity (+/-).
- Tutup penutup petak bateri dengan selamat.
2. Sambungan Probe:
- Connect the desired measurement probe (e.g., CO2 probe, humidity/temperature probe) to the designated input port on the device.
- Ensure the connection is firm and secure to prevent inaccurate readings.
Arahan Operasi
1. Menghidupkan/Mematikan:
- Untuk menghidupkan, tekan dan tahan kuasa button (usually marked with Ⓢ) until the display illuminates.
- Untuk mematikan, tekan dan tahan kuasa butang sekali lagi sehingga paparan dimatikan.
2. Mengambil Ukuran:
- Once powered on and a probe is connected, the device will typically display real-time measurements for the connected parameters (e.g., CO2 in ppm, Temperature in °C/°F, RH in %).
- Position the probe in the environment you wish to measure. Ensure proper air circulation around the sensor for accurate readings.
- Allow a few moments for readings to stabilize, especially for CO2 and humidity.
3. Navigating Menus and Saving Data:
- Gunakan Atas/Bawah arrow buttons to navigate through different measurement modes or menu options.
- Tekan ke Masukkan/OK button (often a central circular button) to select an option or confirm a setting.
- To save a measurement, look for a Jimat or Ingatan button/option. Follow the on-screen prompts to store data.
- To recall saved data, navigate to the Ingatan or Ingat kembali pilihan menu.
Penyelenggaraan
1. Pembersihan:
- Lap peranti casing dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Ensure no liquid enters the sensor openings or electrical connections.
- For probes, follow specific cleaning instructions provided with the probe itself.
2. Penggantian Bateri:
- Gantikan bateri apabila penunjuk bateri lemah muncul pada paparan.
- Sentiasa gunakan bateri baharu daripada jenis yang dinyatakan.
- Buang bateri lama mengikut peraturan tempatan.
3. Penentukuran:
- Regular calibration is essential for maintaining measurement accuracy.
- Refer to the device's on-screen calibration menu or consult Testo's official support for recommended calibration intervals and procedures.
- Some probes may require specific calibration gases or humidity standards.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Peranti tidak dihidupkan. | Bateri mati atau tidak dipasang dengan betul. | Check battery polarity; replace with new batteries. |
| Bacaan yang tidak tepat. | Sensor dirty, damaged, or out of calibration; improper probe connection. | Clean sensor; ensure probe is securely connected; perform calibration. |
| Display shows "Error" or "---". | Sensor malfunction; out of measurement range; internal error. | Check probe connection; move to an environment within measurement range; restart device; contact support if persistent. |
| Cannot save data. | Memory full; incorrect save procedure. | Delete old data; refer to operating instructions for saving data. |
Spesifikasi
The following specifications are for the Testo 400563 4354 IAQ Kit:
- Jenis Produk: CO2/Temp/RH/Barometric Meter
- model: 400563 4354
- Jenama: Testo
- Nombor Bahagian: AO-10382-23
- Kuantiti Pakej: SETIAP
- Dimensi Pakej: 16.3 x 13 x 4.3 inci; 8.2 paun
- ASIN: B00481RUUA
- Pertama Tersedia: 18 Julai 2012
Note: Specific measurement ranges and accuracies depend on the probes used with the device. Refer to individual probe documentation for detailed specifications.
Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please contact Testo customer service or visit their official webtapak.
Anda boleh mendapatkan maklumat lanjut dan butiran hubungan di Kedai Testo di Amazon.
