Android Car Player Instruction Manual

Android Car Player Instruction

SPESIFIKASI

• power Supply Volllgo
• Penggunaan Semasa Maksimum
• Kuasa Output Maks

1. GAMBARAJAH PENDAWAIAN MESIN UNIVERSAL
   
2. GAMBARAJAH PENDAWAIAN KENDERAAN KHAS

LANGKAH BERJAGA-JAGA PENDAWAIAN

• 10P: Connect the reversing video input. Note: The two short wires above this line are the Bluetooth antenna and the WIFI antenna. Even if the reversing camera is not connected, this cable needs to be connected to the machine, otherwise Bluetooth and WIFI will not be connected, and carplay and Android auto will not be connected.
• 6P: Sambungkan USB-2.
• 4P. Connect USB-1.
• 8P: Connect the CANBUS box. Note: When the product you purchased has a CANBUS box, you must connect the CANBUS box to the
• 8Pin socket on the body, otherwise some of the original car functions will not be available.
• 12P.360-degree panoramic reversing image (only supported by some models).
• 20P.RCA plug. The AMP Talian CONT perlu memberi perhatian kepada: Jika kereta anda menyokong pembesar suara seperti JBL atau BOSE, anda mungkin perlu menyambungkan kabel ini ke kawalan on-off kuasa kereta anda amplifier, and try connecting it when there is no sound.

KAEDAH PEMASANGAN KAMERA TERBALIK

ARAHAN PENDAWAIAN KOD KUASA UNIVERSAL

Tips The wiring harness colors of some models may be different. Please refer to the wire labels and the positions on the plugs and sockets.

DEFINISI PIN KUASA MESIN UNIVERSAL

BELAJAR KAWALAN RODA STEELING
Tekan dan tahan butang pada stereng kereta asal dan cari ikon butang yang sepadan dengan fungsi butang pada stereng. Klik ikon untuk menukar warna, pembelajaran berjaya.

iPHONE Mirrorlink (Hanya beberapa model yang menyokong)
Apabila peranti dipalamkan ke iPhone, kandungan skrin telefon akan ditayangkan ke skrin kereta.

Android Mirrorlink (Hanya beberapa model yang menyokong)
When using an Android device, after connecting the USB data cable. you will be prompted to install the APP software. After installation, Plug the data cable again, it will enter the screen mirroring mode. And it can be operatedon both the player screen and the phone screen. Only the image transfer is successful at this time. The sound can only be  transmitted after the Bluetooth connection is successful.

Apple Car Play (Only some models support)

1. Wired connection: Just connect the USB data cable, and then it will auto matically enter the CarPlay interface.
2. Wireless connection: first tum on the bluetooth and wifi functions of the mobile phone. and then connect the bluetooth. Then it will automatically enter the CarPlay interface.
   (Note. The signal is transmitted through wifi at this ime, so even if the Bluetooth function is tumed off, it will be transmitted normally. When the wifi function is turned off. CarPlay will be disconnected.)

Android Auto (Hanya beberapa model yang menyokong)
Ciri ini tidak disokong di semua negara dan “Perkhidmatan Google Play perlu tersedia secara tempatan.

1. Perlu memuat turun dan memasang "Android Auto" software in “Google Play”
2. Telefon mudah alih dengan Android 6.0 atau lebih tinggi mesti digunakan. Mesti menggunakan sambungan kabel data yang sah.
3. Sambungan berwayar: Hanya sambungkan kabel data USB, dan kemudian ia akan memasuki antara muka Android Auto secara automatik.
4. Wireless connection: First turn on the Bluetooth and wifi functions of the mobile phone. and then connect the Bluetooth. Then it will automatically enter the Android Auto interface. (Note: The signal is transmitted through wifi at this time, so even if the Bluetooth function is turned off, it will be transmitted normally. When the wifi function is turned off, Android Auto will be disconnected.)

MASALAH BIASA DAN PENYELESAIAN MASALAH MUDAH

Tidak boleh boot secara normal

1. “Yellow” “Red” “Black’ this 3 lines only connected 2 line of them, so it will not start, it should be that the yellow line is connected to the positive pole, red line to the key control line, black to the negative pole, less connection or wrong connection does not boot.
2. Talian kereta dan unit pendawaian asal tidak boleh disambungkan kepada warna, warna talian kereta asal tidak standard, jika anda menyambung seperti itu ia bukan sahaja boleh dihidupkan tetapi juga boleh terbakar.
3. Palam kereta asal tidak boleh pasang terus ke unit baru, walaupun hanya pasang, ia tidak boleh digunakan. jika tidak, ia tidak akan dihidupkan atau dibakar.
4. 3 wayar disambungkan dengan betul, tetapi ia tidak but. Periksa sama ada fius pada garisan kuning rosak. Jika tiada masalah dengan fius, putar wayar kuning dan merah bersama-sama. Hidupkan kekunci dan tekan butang kuasa unit untuk melihat sama ada ia boleh dihidupkan.
5. Every time you change the fuse, it burns. Please don’t change it again The reason is that when you first connect the positive and negative poles, the protection circuit of the unit is short-circuited. The unit can be repairedunder the guidance of our master. No basis can only be returned to the after-sales or new unit. If these are no problem, or also don’t boot, please make the final step to confirm, find a 12V battery or 12V power supply yellow and “red twist together with the positive, black to the negative pole. press the button check if it can boot or no, if you can boot, it showed that the original car line is not right connect, or there is a problem with the car line.  If it can’t be boot, the unit is broken. Does not boot unit, check the line carefully, do not blindly suspect the unit problem.

Penutupan automatik

1. Ralat kabel menyambung: Jika kabel biru (bekalan kuasa antena automatik) disambungkan ke kabel kuasa unit, penutupan automatik akan berlaku. Sila ikut kaedah pendawaian yang betul untuk menyelesaikan masalah.
2. Jilidtage tidak stabil: sila cari 12V-5A yang mana satu adalah bekalan kuasa dan diuji semula untuk melihat sama ada ia akan ditutup secara automatik. Jika ia tidak dimatikan secara automatik selepas ujian, sila gantikan bekalan kuasa. Jika ia akan ditutup secara automatik, ia adalah masalah dengan unit.

ada bunyi bising

1. Kuasa pembesar suara asal terlalu kecil. Apabila isipadu unit dinaikkan. akan ada bunyi bising.
   Penyelesaian: Apabila menggantikan pembesar suara atau mendengar lagu, kelantangan tidak boleh terlalu besar.

Kabel pembesar suara dibumikan.
Penyelesaian: Ambil kabel pembesar suara besi. Disambungkan terus ke kabel pembesar suara unit.

Alat kawalan jauh tidak boleh digunakan

1. Test method Turn on the camera of the mobile phone and align the light of the remote control then press the button of the remote control to see if the phone will light up. If it is not lit there will be no power. Replace the battery: If it is it there is electricity, which proves that there is no problem with the remote control.

Tetapan tidak boleh disimpan (tiada memori)

1. Garis kuning dan garis merah disambungkan bersama (pisahkan kuning kepada positif, merah kepada kawalan kekunci).
2. Kuning dan merah diterbalikkan (tukar kedudukan sahaja).

Bluetooth tidak berfungsi
Hidupkan mesin, cari nama Bluetooth mesin menggunakan Bluetooth telefon mudah alih, dan kemudian klik Sambung, selepas menyambung, anda boleh menjawab panggilan atau memainkan lagu melalui Bluetooth.

Produk mengeluarkan asap
Gantikan fius FUSE, jika masalah tidak dapat diselesaikan, litar dalaman telah terbakar. Perkhidmatan selepas jualan diperlukan.

Bunyi tidak boleh dilaraskan

1. Sila tetapkan semula unit atau cabut palam kord kuasa dan pasangkannya.
2. The Volume knob is broken, and it can be replaced.

Kamera undur tidak dipaparkan

1. Pendawaian yang salah atau pendawaian yang hilang.

Kaedah sambungan kamera:

1. Cari aksesori: 1 kamera + 1 kord kuasa +1 kabel video.
2. Find the port of the wiring. First find the reverse control line on the power line of the unit. The control line is a pink line. Connect this line to the positive pole of 12V and the screen will turn blue. And then find the back of the unit the CAM video input interface, find the positive and negative of the backup light.
3. Terdapat dua soket pada kamera, soket merah disambungkan ke kabel kuasa, kuning dimasukkan ke dalam kabel video, wayar merah kabel kuasa dan wayar kabel video diskrukan pada kutub positif terbalik lamp, and the black wire of the power cable is not used. connected, the other end of the video cable is connected to the CAM video input interface on the back of the unit. The red line coming out of the video line is connected to the reversing control line of the power line.
4. Kamera rosak. Jika lamp yang disambungkan dengan betul ke kamera tidak menyala. ia akan rosak dan diganti dengan yang baru.

Peranti USB tidak boleh dimainkan
Formatkan cakera denyar USB, dan file sistem dipilih sebagai: FAT32, muat turun semula pada atau dua lagu dan cuba lagi. Jika masih tidak berfungsi, sila gantikan pemacu kilat USB.

FM tidak menerima stesen radio

1. The antenna plug is not fully inserted, the antenna is disconnect or the line is disconnected.
2. Search station, press AS will automatically search or press the before or after button. Can’t solve the above 2 points. Please unplug the antenna plug and find a screwdriver or a metal strip to insert into the antenna.

Tiada bunyi sejurus selepas pemasangan
Dear customers, the unit has been tested before shipment. If there is no sound, it is usually a wiring error or the original car speaker wire is short- circuited with iron. According to the steps to check it:

1. Periksa sama ada kabel pembesar suara litar pintas dan disambungkan. Sila sambung semula jika anda mempunyai sebarang litar pintas.
2. Check how many speaker cables according to the original speaker cable if there are only 2 speaker cables, to prove that the original car line does not match our unit, you need to re-route the original car line. One speaker must lead to 2 speaker wires. 2 speakers must be have 4 speaker cables to available.

Tidak ada bunyi selepas beberapa ketika
Disconnect all the speaker cable from the unit (do not remove them), and then find an external speaker to receive the gray and purple of the tail line of the unit.Check any group, and then try to see if there is any sound If there is a sound, it is proven that the car’s speaker line is short-circuited with iron or the speaker is damaged. If there is no sound, the unit is broken.

Petua: If the device is updated, the functions are subject to change without prior notice