1. Pengenalan
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of the Samsung Washing Machine PCB Control Panel Display Board (Models DC92-00248E, DC41-00104B). This component is a critical replacement part designed to restore the full functionality of your Samsung drum washing machine's control and display interface. Please read this manual thoroughly before attempting any installation or repair.
2. Maklumat Keselamatan
AMARAN: Risiko Renjatan Elektrik
- Always disconnect the washing machine from the main power supply before attempting any installation, repair, or maintenance.
- Only qualified technicians or individuals with appropriate electrical knowledge should attempt to replace this component.
- Wear appropriate personal protective equipment (PPE), including insulated gloves, during installation.
- Ensure all connections are secure and correctly made before restoring power to the appliance.
- Do not operate the washing machine if the control board or any electrical component is damaged or exposed to moisture.
3. Produk Lebihview
The PCB Control Panel Display Board is the central interface for controlling and monitoring your Samsung drum washing machine. It integrates the electronic circuitry for program selection, cycle timing, and displaying operational status and error codes.
4. Persediaan dan Pemasangan
This control board is a direct replacement part. Proper installation is crucial for the safe and correct functioning of your washing machine. It is highly recommended that installation be performed by a certified appliance technician.
- Putuskan Kuasa: Cabut plag mesin basuh dari saluran keluar dinding.
- Panel Kawalan Akses: Depending on your specific Samsung washing machine model, you may need to remove the top panel or front fascia to access the existing control board. Refer to your washing machine's service manual for exact instructions.
- Sambungan Dokumen: Before disconnecting any wires, take clear photos of all wiring connections to the old PCB. Note the position and color of each wire.
- Putuskan Sambungan Papan Lama: Tanggalkan semua penyambung pendawaian dan skru pelekap yang mengikat papan kawalan lama dengan berhati-hati.
- Pasang Papan Baharu: Position the new PCB Control Panel Display Board in the same location as the old one. Secure it with the appropriate screws.
- Sambung semula Pendawaian: Using your documented photos, carefully reconnect all wiring harnesses to the new board. Ensure each connector is firmly seated.
- Pasang semula Perkakas: Reattach any panels or fascia removed during the process.
- Kefungsian Ujian: Plug the washing machine back into the power outlet. Perform a test cycle to ensure all functions (power, display, program selection, water fill, spin, etc.) are working correctly.
5. Arahan Operasi
This PCB Control Panel Display Board enables the operation of your Samsung washing machine. Once installed, operate your washing machine according to its original user manual. The board facilitates the following core functions:
- Hidupkan/Mati Kuasa
- Program Selection (e.g., Cotton, Synthetics, Delicates)
- Cycle Start/Pause
- Display of remaining time, error codes, and selected options
- Adjustment of temperature, spin speed, and rinse cycles
If the washing machine does not respond as expected after installation, refer to the Troubleshooting section.
6. Penyelenggaraan
The PCB Control Panel Display Board is a sealed electronic component and generally requires no routine maintenance. To ensure its longevity and proper function:
- Keep the washing machine's control panel clean and dry. Avoid using abrasive cleaners or excessive moisture.
- Protect the washing machine from extreme temperatures and humidity.
- Ensure the washing machine is properly grounded to prevent electrical surges.
7. Penyelesaian masalah
If you encounter issues after installing the new control board, consider the following:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Washing machine does not power on | Loose power connection, faulty outlet, incorrect wiring. | Check power cord, test outlet, re-verify all wiring connections to the PCB. |
| Display is blank or shows incorrect characters | Loose display ribbon cable, faulty display component. | Ensure display ribbon cable is securely connected. If issue persists, the display component may be faulty. |
| Butang tidak bertindak balas | Loose button connections, faulty buttons. | Check connections to the button array. Ensure no debris is obstructing buttons. |
| Washing machine displays an error code | Specific appliance fault. | Refer to your washing machine's original user manual for the meaning of the error code and recommended solutions. |
Jika langkah penyelesaian masalah tidak menyelesaikan isu, hubungi juruteknik perkhidmatan yang berkelayakan.
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | DC92-00248E, DC41-00104B |
| bahan | Komposit |
| Ketebalan | 0.6mm |
| taip | Venir |
| bentuk | I |
| asal usul | Tanah Besar China |
| Bahan kimia yang sangat prihatin | tiada |
| Penyesuaian | Tidak |
| Berat Pakej | 1.0 kg |
| Dimensi Pakej (L x W x H) | 20 cm x 20 cm x 15 cm |
9. Petua Pengguna
- Always double-check model compatibility before purchasing a replacement part.
- When handling the PCB, avoid touching the electronic components directly to prevent static discharge damage.
- Keep the work area clean and well-lit during installation.
10. Sokongan
For further assistance or technical inquiries regarding this product, please contact the seller or a qualified appliance repair professional.
