BOSCH GSB 185-LI Brushless Cordless Impact Drill Instruction Manual

1. Pengenalan

The Bosch GSB 185-LI is a versatile 18V brushless cordless impact drill designed for various applications including wood drilling, metal drilling, brick wall drilling, and screwing. Its compact and lightweight design makes it suitable for a wide range of tasks, offering powerful performance and durability.

2. Arahan Keselamatan Am

Sentiasa patuhi langkah berjaga-jaga keselamatan asas apabila menggunakan alatan kuasa untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan diri.

• Read all instructions and safety warnings provided with the tool before operation.
• Pakai peralatan pelindung diri yang sesuai, termasuk pelindung mata, pelindung pendengaran, dan sarung tangan.
• Pastikan kawasan kerja anda bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan.
• Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Jauhkan kanak-kanak dan orang ramai semasa mengendalikan alat kuasa.
• Ensure the battery pack is fully charged and properly inserted before use.
• Always secure the workpiece before drilling or screwing.
• Kekalkan pijakan dan keseimbangan yang betul pada setiap masa.

3. Komponen Selesaiview

Familiarize yourself with the key components of your Bosch GSB 185-LI impact drill:

• Metal Collet: For securely holding drill bits and screwdriver bits.
• Badan Kompak: Reka bentuk yang ringan dan ergonomik untuk kegunaan yang selesa.
• Motor tanpa berus: Provides efficient power, longer runtime, and extended tool life.
• Smart LED Lights: Menerangi kawasan kerja untuk penglihatan yang lebih baik.
• Penunjuk Bateri: Memaparkan baki aras cas bateri.
• Bosch Professional 18V Battery System: Compatible with all Bosch Professional 18V batteries.
• Cincin Pelarasan Tork: For selecting desired torque settings.
• Pemilih Mod: For switching between screwing, drilling, and impact drilling modes.
• Suis Hadapan/Undur: Mengawal arah putaran.
• Pencetus Kelajuan Berubah: Allows for precise speed control.

4. Persediaan

4.1 Pemasangan dan Pembuangan Bateri

Ensure the battery is fully charged before first use. The GSB 185-LI uses the Bosch Professional 18V Battery System.

• Untuk Memasang: Sejajarkan pek bateri dengan tapak alat dan luncurkannya ke dalam sehingga ia berbunyi klik dengan selamat di tempatnya.
• Untuk Alih Keluar: Press the release button on the battery and slide it out.

4.2 Chuck and Bit Installation

• Putar chuck melawan arah jam untuk membuka rahang.
• Masukkan bit gerudi atau bit pemutar skru sepenuhnya ke dalam chuck.
• Twist the chuck clockwise to tighten it securely. Ensure the bit is centered and firmly gripped.

5. Arahan Operasi

5.1 Menghidupkan/Mematikan dan Kawalan Kelajuan

• Press the trigger switch to start the tool. Release the trigger to stop.
• The tool features a variable speed trigger for precise control. Pressing the trigger further increases the speed.
• The no-load speed ranges from 0-500 RPM (low gear) to 0-1900 RPM (high gear).

5.2 Arah Putaran

• Use the forward/reverse switch located above the trigger to select the desired rotation direction.
• Push the switch to the left for forward (clockwise) rotation.
• Tolak suis ke kanan untuk putaran undur (lawan arah jam).

5.3 Mode Selection and Torque Settings

The GSB 185-LI offers three main operating modes. Rotate the collar near the chuck to select the desired mode:

• Screw Mode: For driving screws. Adjust the torque ring to the appropriate setting (1-20) to prevent overtightening or stripping screw heads.
• Flat Drill Mode: For drilling into wood, metal, and plastics. Use higher speed settings for smaller bits and softer materials, and lower speeds for larger bits and harder materials.
• Impact Drill Mode: For drilling into masonry and brick walls. This mode engages a hammering action for faster penetration.

5.4 Aplikasi

The GSB 185-LI is suitable for a variety of tasks:

• Penggerudian Kayu: Use appropriate wood drill bits and select Flat Drill Mode.
• Penggerudian Logam: Use appropriate metal drill bits and select Flat Drill Mode. Apply steady pressure and use cutting fluid if necessary.
• Brick Wall Drilling: Use masonry drill bits and select Impact Drill Mode.
• Skru: Use appropriate screwdriver bits and select Screw Mode. Adjust the torque setting to match the screw size and material.

Video 1: Selesaiview of the Bosch GSB 185-LI's features and applications.

6. Penyelenggaraan

• Pembersihan: Keep the tool clean and free from dust and debris. Use a soft, damp kain untuk pembersihan. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Pemeriksaan Chuck: Regularly check the chuck for wear and ensure it grips bits securely. Replace if worn or damaged.
• Storan: Store the tool and batteries in a dry, cool place, away from direct sunlight, moisture, and extreme temperatures.
• Penjagaan Bateri: Do not store batteries in a discharged state. Charge them periodically if not in use for extended periods.

7. Penyelesaian masalah

8. Spesifikasi

9. Petua Pengguna

• Bateri dan Pengecas: The Bosch GSB 185-LI is typically sold as a bare tool. Batteries and chargers are usually sold separately. Ensure you have a compatible Bosch Professional 18V battery and charger for operation.
• Prestasi Optimum: For best results, always use sharp, high-quality drill bits and screwdriver bits appropriate for the material you are working with.
• Ruang Sempit: The compact body of the GSB 185-LI makes it ideal for working in tight or confined spaces.

10. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the official Bosch website or contact your authorized Bosch dealer. Keep your purchase receipt as proof of purchase for any warranty claims.