Manual Pengguna YABER Car Jump Starter 4000A 26800mAh

1. Pengenalan

Thank you for choosing the YABER Car Jump Starter. This device is designed to provide a reliable solution for starting your vehicle's battery, acting as a powerful power bank, and offering emergency lighting. This manual will guide you through the proper use, maintenance, and safety precautions to ensure optimal performance and longevity of your jump starter.

Having this device in your car's trunk provides peace of mind, ensuring you can start your car and get home without waiting for roadside assistance, especially when facing issues like a battery left unused for too long or low temperatures affecting battery performance.

Common scenarios where the YABER Jump Starter is essential.

2. Amaran Keselamatan Penting

Sila baca dan fahami semua maklumat keselamatan sebelum menggunakan produk ini. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.

Pintar Clamps Protection Features:

The YABER Jump Starter is equipped with smart clamps that incorporate multiple protection mechanisms to ensure safe operation:

• Perlindungan Suhu Tinggi: Prevents overheating during operation.
• Perlindungan Sambungan Terbalik: Alerts and prevents damage if clamps disambungkan dengan salah.
• Perlindungan Semasa: Perlindungan terhadap aliran arus yang berlebihan.
• Perlindungan Caj Songsang: Menghalang arus daripada mengalir kembali ke jump starter daripada bateri kenderaan.
• Perlindungan Polariti Terbalik: Ensures correct polarity connection.
• Perlindungan Lebih Pelepasan: Melindungi bateri dalaman daripada nyahcas yang dalam.
• Perlindungan Lebih Caj: Prevents overcharging of the internal battery.
• Perlindungan Litar pintas: Dimatikan secara automatik sekiranya berlaku litar pintas.

cl yang bijakamps provide multiple layers of safety.

Visual representation of the smart clamp protection features.

Langkah Keselamatan Am:

• Jangan rendam produk dalam air.
• Jangan kendalikan produk dalam atmosfera mudah meletup, seperti dalam kehadiran cecair mudah terbakar, gas atau habuk.
• Jangan ubah atau bongkar produk.
• Jauhkan daripada kanak-kanak.
• Gunakan hanya cl pintar yang disediakanamps and cables.

3. Kandungan Pakej

Sila semak pakej untuk item berikut:

• Car Jump Starter (YA40) x 1
• Protective Smart Clamps (Red = positive; Black = negative) x 1
• Kabel USB Jenis-C x 1
• Inflator Hose x 1 (if applicable to your model variant)
• Manual Pengguna x 1
• Kotak Penyimpanan x 1

The YABER Jump Starter and its included accessories.

4. Ciri-ciri Produk

The YABER Car Jump Starter is a versatile device offering multiple functionalities:

• Pemula Lompat Berkuasa: Delivers 4000A peak current, capable of starting all 12V gasoline engines and up to 10.0L diesel engines.
• High Capacity Power Bank: Features a 26800mAh battery capacity with two USB outputs (5V/2.4A, 9V/2A) and a USB-C input (5V/9V 2A) for fast charging of mobile devices.
• Output DC 12V/10A: Provides power for various 12V accessories.
• Lampu Kecemasan LED: Integrated flashlight with 3 modes: Illumination (Normal), Strobe, and SOS for emergency situations.
• Operasi Suhu Melampau: Designed to work reliably in temperatures ranging from -20℃ to +60℃ (-4°F to 140°F).
• Pintar Clamps: Equipped with multiple safety protections as detailed in the Safety Warnings section.

Berakhirview of the YABER Jump Starter's multi-functional capabilities.

5. Spesifikasi

The jump starter is designed for reliable performance in a wide range of temperatures.

6. Persediaan dan Pengecasan Awal

Before first use, ensure the jump starter is fully charged. It is recommended to fully charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided Type-C USB cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB wall adapter (not included) or a powered USB port.
3. The digital display on the jump starter will show the charging progress. Charge until the display shows 100%.

The device supports two-way fast charging, allowing for quick recharging of the unit itself.

7. Arahan Operasi

7.1. Lompat Memulakan Kenderaan

Pastikan jump starter dicas sekurang-kurangnya 50% sebelum cuba memulakan kenderaan dengan jump start.

1. Sisipkan: Pasang cl pintaramp cable into the jump starter's 12V jump start port. Ensure it is fully inserted.
2. Sambung: Lekatkan cl (+) merahamp to the positive terminal of your vehicle's battery and the black (-) clamp to the negative terminal. The smart clamps will indicate if the connection is correct.
3. Mulakan: Start your car's engine. If it doesn't start immediately, wait 20-30 seconds and try again. Do not crank for more than 3 seconds per attempt.
4. Alih keluar: Once the car starts, immediately remove the smart clampdaripada bateri kereta, kemudian cabut plag lampu pintaramp kabel daripada penghidup lompat.

Visual guide for the jump starting process.

The YABER Jump Starter is suitable for a wide range of 12V vehicles.

7.2. Menggunakan sebagai Power Bank

The jump starter can charge your electronic devices via its USB output ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-1 or USB-2).
2. Pemula lompat akan mula mengecas peranti anda secara automatik.
3. Paparan digital akan menunjukkan baki peratusan bateritage.

Charging multiple devices simultaneously with the power bank function.

7.3. Using the LED Emergency Light

The built-in LED light has three modes: Illumination (normal flashlight), Strobe, and SOS.

1. Press and hold the power button for approximately 3 seconds to turn on the Illumination mode.
2. Press the power button briefly to cycle through the modes: Illumination > Strobe > SOS.
3. Press and hold the power button again for 3 seconds to turn off the light.

The LED light provides versatile illumination for various situations.

Terperinci view of the LED emergency light modes.

8. Penyelenggaraan dan Penyimpanan

• mengecas: Recharge the jump starter every 3-6 months, even if not used, to prolong battery life.
• Pembersihan: Use a dry, soft cloth to clean the device. Do not use harsh chemicals or abrasive materials.
• Storan: Store the device in a cool, dry place away from direct sunlight, heat sources, and moisture. Keep it in its protective storage box when not in use.
• Suhu: Avoid storing the device in environments outside its operating temperature range (-20℃ to +60℃).

9. Penyelesaian masalah

Peranti tidak akan dihidupkan:

• Ensure the device is charged. Connect it to a power source using the Type-C cable.

Vehicle will not jump start:

• Semak bahawa cl pintaramp cable is fully inserted into the jump starter.
• Ensure the red (+) and black (-) clamps are connected correctly to the vehicle battery terminals. The smart clamps should indicate a correct connection.
• Verify that the jump starter has sufficient charge (at least 50%).
• If the vehicle battery is completely dead, it may take a few attempts. Wait 20-30 seconds between attempts.
• Jika cl pintaramps show an error, refer to the smart clamp's indicator guide (if available) or disconnect and reconnect carefully.

Peranti tidak mengecas daripada bank kuasa:

• Pastikan jump starter mempunyai cas yang mencukupi.
• Check that the USB cable is securely connected to both the jump starter and your device.
• Cuba kabel atau port USB lain.

10. Petua Pengguna

• Always keep the jump starter charged, especially before long trips or during winter months when car batteries are more prone to failure.
• Familiarize yourself with the smart clamp indicators. They are designed to provide immediate feedback on connection status and potential issues.
• When jump starting, ensure your vehicle's ignition is off before connecting the clamps.
• After a successful jump start, allow your car's engine to run for a few minutes to recharge its battery before turning it off.

11. Waranti dan Sokongan

YABER products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact YABER customer service through the official webtapak atau tempat pembelian anda.

Sila simpan bukti pembelian anda untuk tuntutan waranti.

12. Soalan Lazim (FAQ)

Q: What power does the device charge? Is it 110V or 220V?

A: The YABER Jump Starter charges via a USB-C input (5V/2A, 9V/2A). You can use any standard USB wall adapter (110V or 220V compatible) with a USB-C output to charge the device. The jump starter itself does not have a direct 110V or 220V input.

Q: Is the product new and does it come with a warranty?

A: Yes, all new YABER products are sold with a manufacturer's warranty. Please refer to the 'Warranty and Support' section for more details.