Po Labs PoUSB12C USB to UART Adapter User Manual
महत्वाची माहिती
- हा दस्तऐवज जारी केल्याच्या तारखेपासून या दस्तऐवजात समाविष्ट केलेली सर्व माहिती वर्तमान आहे. तथापि, अशी माहिती कोणत्याही पूर्वसूचनेशिवाय बदलू शकते.
- Po Labs does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Po Labs products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Po Labs or others. Po Labs claims the copyright of, and retains the rights to, all material (software, documents, etc.) contained in this release. You may copy and distribute the entire release in its original state, but must not copy individual items within the release other than for backup purposes.
- या दस्तऐवजातील सर्किट्स, सॉफ्टवेअर आणि इतर संबंधित माहितीचे वर्णन केवळ उत्पादनांचे ऑपरेशन आणि ऍप्लिकेशनचे उदाहरण देण्यासाठी प्रदान केले आहे.amples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Po Labs assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information.
- Po Labs has used reasonable care in preparing the information included in this document, but Po Labs does not warrant that such information is error free. Po Labs assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
- Po Labs devices may be used in equipment that does not impose a threat to human life in case of the malfunctioning, such as: computer interfaces, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment, and industrial robots.
- Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when Po Labs devices are used for or in connection with equipment that requires higher reliability, for example: वाहतूक नियंत्रण प्रणाली, आपत्तीविरोधी प्रणाली, क्राइम प्रतिबंधक प्रणाली, सुरक्षा उपकरणे, विशेषत: जीवन समर्थनासाठी तयार केलेली वैद्यकीय उपकरणे आणि इतर तत्सम अनुप्रयोग.
- Po Labs devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety, as for example: विमान प्रणाली, एरोस्पेस उपकरणे, आण्विक अणुभट्टी नियंत्रण प्रणाली, वैद्यकीय उपकरणे किंवा जीवन समर्थन प्रणाली (उदा. कृत्रिम जीवन समर्थन उपकरणे किंवा प्रणाली), आणि मानवी जीवनाला थेट धोका निर्माण करणारे इतर कोणतेही अनुप्रयोग किंवा उद्दिष्टे.
- You should use the Po Labs products described in this document within the range specified by Po Labs, especially with respect to the maximum rating, operating supply voltage range and other product characteristics. Po Labs shall have no liability for malfunctions or damages arising out of the use of Po Labs products beyond such specified ranges.
- Although Po Labs endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Po Labs products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Po Labs product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures.
- वापर: the software in this release is for use only with Po Labs products or with data collected using Po Labs products.
- हेतूसाठी तंदुरुस्ती: no two applications are the same, so Po Labs cannot guarantee that its equipment or software is suitable for a given application. It is therefore the user’s responsibility to ensure that the product is suitable for the user’s application.
- व्हायरस: this software was continuously monitored for viruses during production; however, the user is responsible for virus checking the software once it is installed.
- अपग्रेड: आम्ही आमच्याकडून विनामूल्य अपग्रेड प्रदान करतो web येथे साइट www.poscope.com. आम्ही भौतिक मीडियावर पाठवलेल्या अद्यतनांसाठी किंवा बदलांसाठी शुल्क आकारण्याचा अधिकार राखून ठेवतो.
- Please contact a Po Labs support for details as to environmental matters such as the environmental compatibility of each Po Labs product. Please use Po Labs products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Po Labs assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
- Please contact a Po Labs support at support@poscope.com if you have any questions regarding the information contained in this document or Po Labs products, or if you have any other inquiries.
- परवानाधारक केवळ अशा व्यक्तींनाच या सॉफ्टवेअरमध्ये प्रवेश देण्यास सहमत आहे ज्यांना या अटींची माहिती देण्यात आली आहे आणि ते या अटींचे पालन करण्यास सहमत आहेत.
- ट्रेडमार्क: Windows is a registered trademark of Microsoft Corporation. Po Keys, PoKeys55, PoKeys56U, PoKeys56E,PoScope, Po Labs and others are internationally registered trademarks.
परिचय
The PoUSB12C is a USB 2.0 to RS-232 (UART) bridge converter which is simple, cost effective, very small and easy to use. It uses a USB-C type connector to connect to your PC and is based on the CP2102 Bridge from Silicon Labs. It provides the user with multi baud rate serial data and access to USB control signals in a convenient 8 pin 2,54 mm (0.1”) pitch package. The PoUSB12C is ideal for prototype or production.
The converter automatically manages the requests from USB host and commands for controlling the UART functions which simplifies the development effort and firmware. PoUSB12C also supports the RS485 standard and has an additional pin for transmit/receive (driver/receive enable) selection. To modify the device and its functionality Simplicity Studio software can be downloaded and used.
मुख्य वैशिष्ट्ये:
- USB 2.0 compliant full-speed device (12Mbps maximum speed).
- Xon/Xoff handshaking supported (300bps to 3Mbps).
- UART supports 5-8 bit data, 1-2 Stop bits, odd/even and no parity.
- Integrated EEPROM for Vendor ID, product ID, serial and release number.
- On-chip 3.3V regulator available with power on reset circuit.
- USB समर्थित.
- TX and RX signal levels are between 0V and 3.3V but 5V logic compatible.
- Temperature range: -40 to +85 °C.
- Small size: 19mm x 11mm x 4mm.
- Virtual COM port drivers for Windows, Linux and MACOS.
- Simplicity Studio software for customization.
कनेक्टर आणि पिनआउट
वर्णन पिन करा
| 5V | Supply pin for 5V power from USB |
| 3V3 | Regulated 3.3V power supply from IC (100mA max) |
| GND | ग्राउंड |
| TX (TXD) | Digital Output. Asynchronous data output (UART Transmit) |
| RX (RXD) | Digital Input. Asynchronous data input (UART Receive) |
| RTS | Digital Output. Ready To Send control output (active low). |
| CTS | Digital Input. Clear To Send control input (active low). |
| RS485 (485) | Digital Output. RS485 control signal. |
वापर उदाampलेस
PoUSB12 makes USB to Serial interface very simple, so you can easily create USB to RS-232 converters, USB to RS-422/RS-485 converters, upgrade legacy RS232 devices, make PDA and cellphone USB interface cables, barcode readers, POS terminals, etc. In any application, make sure the TX and RX lines from the PoUSB12 are crossed over to the attached peripheral. That is, the TX from the PoUSB12 connects to the RX of the target and the RX from the PoUSB12 connects to the TX of the target device. Note: the TX and RX signal levels are between 0.0 Volts and 3.3 Volts and they are 5V logic compatible.
The RS485 pin is an optional control pin that can be connected to the DE and RE inputs of the transceiver. When configured for RS485 mode, the pin is asserted during UART data transmission. The RS485 pin is active-high by default and is also configurable for active low mode using Xpress Configurator.
यांत्रिकी परिमाण
परवान्याचे अनुदान
The material contained in this release is licensed, not sold. Po Labs grants a license to the person who installs this software, subject to the conditions listed below.
प्रवेश
परवानाधारक केवळ अशा व्यक्तींनाच या सॉफ्टवेअरमध्ये प्रवेश देण्यास सहमत आहे ज्यांना या अटींची माहिती देण्यात आली आहे आणि ते या अटींचे पालन करण्यास सहमत आहेत.
वापर
The software in this release is for use only with Po Labs products or with data collected using Po Labs products.
कॉपीराइट
Po Labs claims the copyright of, and retains the rights to, all material (software, documents etc) contained in this release. You may copy and distribute the entire release in its original state, but must not copy individual items within the release other than for backup purposes.
दायित्व
Po Labs and its agents shall not be liable for any loss or damage, howsoever caused, related to the use of Po Labs equipment or software, unless excluded by statute.
हेतूसाठी फिटनेस
No two applications are the same, so Po Labs cannot guarantee that its equipment or software is suitable for a given application. It is therefore the user’s responsibility to ensure that the product is suitable for the user’s application.
मिशन क्रिटिकल ऍप्लिकेशन्स
कारण सॉफ्टवेअर अशा संगणकावर चालते जे कदाचित इतर सॉफ्टवेअर उत्पादने चालवत असेल आणि या इतर उत्पादनांच्या हस्तक्षेपाच्या अधीन असू शकते, हा परवाना विशेषत: 'मिशन क्रिटिकल' ऍप्लिकेशन्समधील वापर वगळतो.ampजीवन समर्थन प्रणाली.
चुका
उत्पादनादरम्यान त्रुटींसाठी या मॅन्युअलचे सतत निरीक्षण केले गेले; तथापि, एकदा वापरकर्ता मॅन्युअल वापरल्यानंतर त्रुटी तपासण्यासाठी जबाबदार आहे.
सपोर्ट
या मॅन्युअलमध्ये त्रुटी असू शकतात, परंतु तुम्हाला काही आढळल्यास, कृपया आमच्या तांत्रिक सहाय्य कर्मचार्‍यांशी संपर्क साधा, जे वाजवी वेळेत समस्येचे निराकरण करण्याचा प्रयत्न करतील.
अपग्रेड
आम्ही आमच्याकडून विनामूल्य अपग्रेड प्रदान करतो web येथे साइट www.PoLabs.com. आम्ही भौतिक मीडियावर पाठवलेल्या अद्यतनांसाठी किंवा बदलांसाठी शुल्क आकारण्याचा अधिकार राखून ठेवतो.
ट्रेडमार्क
Windows is a registered trademark of Microsoft Corporation. Po Keys, PoKeys55, PoKeys56U, PoKeys56E, PoKeys57U, PoKeys57E, PoKeys57CNC, Po Scope, Po Labs, Po Ext Bus, Po Ext Bus Smart, PoRelay8, Plasma Sens and others are internationally registered trademarks.
ग्राहक समर्थन
कागदपत्रे / संसाधने
 |
PoLabs PoUSB12C USB to UART Adapter [pdf] वापरकर्ता मॅन्युअल PoUSB12C USB to UART Adapter, PoUSB12C, USB to UART Adapter, UART Adapter, Adapter |
