Philips Hue Being Ceiling Light Installation and User Manual

Product Overview

This document serves as the user manual and installation guide for the Philips Hue Being ceiling light, a smart lighting solution offering personal wireless control.

The manual is available in multiple languages, including English, German, French, Spanish, Portuguese, Italian, Russian, Ukrainian, and Kazakh.

What's Included

The Philips Hue Being ceiling light package typically includes:

• The Hue Being ceiling light fixture.
• One CR2032 battery (for use with compatible Hue accessories like dimmer switches).
• Mounting hardware such as screws and wall plugs.

Tools and Materials Not Included

For installation, you will need the following tools, which are not supplied with the product:

• Drill ?
• Screwdriver (Phillips and Flathead) ?
• Pencil ✏️

Important Safety and Usage Information

• Power Safety: Always switch off the main power supply at the circuit breaker ?❌ before commencing any installation work.
• Environment: This fixture is designed for indoor use only ? and is not suitable for bathrooms ?❌.
• Clearance: Maintain a minimum clearance of 5cm (approx. 2 inches) from the ceiling ?.
• Ventilation: Do not cover the light fixture ?❌ to ensure proper heat dissipation.
• Electrical Connections: Ensure all electrical connections are made correctly and securely, including proper grounding ?. Verify voltage and wattage compatibility ?.
• Dimming: This light is designed for use with the Philips Hue system and is not compatible with standard external dimmer switches ?️❌.

Installation Guide

Follow these steps for a secure and correct installation:

1. Step 1: Disconnect Power

   Turn off the power to the installation area at the main circuit breaker ?❌.

2. Step 2: Mount the Base Plate

   Disassemble the main light fixture. Position the mounting base plate on the ceiling where the light will be installed. Mark the screw hole positions with a pencil ✏️. Drill holes if necessary and insert wall plugs. Securely fasten the base plate to the ceiling using the provided screws.

   Diagram Description: Shows the ceiling light fixture being separated, revealing the mounting base. The base is then shown being attached to the ceiling with screws and plugs.

3. Step 3: Connect Wiring

   Connect the household electrical wires to the corresponding terminals within the fixture's wiring compartment. Ensure correct polarity for live, neutral, and ground wires. Use the provided connectors for a secure connection.

   Diagram Description: Illustrates the process of connecting the main power supply wires to the fixture's internal wiring block, including the ground wire. Push-in connectors are shown for wire joining.

4. Step 4: Attach the Fixture

   Carefully lift the main light fixture and align it with the mounted base plate. Secure the fixture to the base plate using the provided screws. Ensure it is firmly attached.

   Diagram Description: Depicts the main light unit being attached to the ceiling-mounted base plate, with screws being used for fastening.

5. Step 5: Restore Power

   Once the fixture is securely mounted and all wiring is complete, turn the power back ON at the circuit breaker ?✅.

6. Step 6: Install Diffuser

   Attach the outer diffuser or cover to the main light fixture. This is typically done by twisting or clipping it into place until it is secure.

   Diagram Description: Shows the final step of attaching the decorative outer ring or diffuser to the installed ceiling light.

Operating Your Philips Hue Being Light

The Philips Hue Being ceiling light can be controlled using the Philips Hue mobile app or a compatible Philips Hue accessories like the dimmer switch.

Using the Hue Dimmer Switch:

• Click ?: Toggles the light ON or OFF (вкл/выкл).
• Hold ✊: Adjusts the brightness level (dim up/down - прибавить/убавить).
• Click ? (Hue Button): Cycles through pre-set lighting scenes (scene cycle - цикл режимов).

Available Lighting Scenes:

• Read (Чтение)
• Relax (Отдых)
• Concentrate (Концентрация)
• Energize (Заряд энергии)

Mounting Flexibility

The fixture offers flexible mounting options. It can also be magnetically attached to metallic surfaces, such as refrigerators ?, for alternative placement.

Product Specifications and Support

Brand: Philips Hue

Product Name: Hue Being Ceiling Light

Model Numbers:

• 929003055201 (Aluminium)
• 929003055101 (Black)
• 929003055001 (White)

Part Number: 4404 029 05265

Last Update: 01/2022

Website: Visit www.philips-hue.com ? for more information and support.

Connectivity: Supports Bluetooth ? and Zigbee ? certified products.