BENFEI USB C Dual Bay Hard Drive Docking Station with UASP Offline Clone Function

परिचय

This manual provides detailed instructions for the BENFEI USB C Dual Bay Hard Drive Docking Station. This device allows for simultaneous reading, writing, and transferring data between two 2.5" or 3.5" HDD/SSD drives, and features a one-button offline clone function. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your device.

बॉक्समध्ये काय आहे

खाली सूचीबद्ध केलेल्या सर्व वस्तू तुमच्या पॅकेजमध्ये समाविष्ट आहेत याची खात्री करा:

• 1 x BENFEI USB 3.0 to SATA Dual-Bay Hard Drive Docking Station
• 1 x USB-A/C to USB-C Cable (3.3 ft / 1 M)
• 1 x USB-C to USB-C Cable (Power supply) (3.3 ft / 1 M)
• १ x ३३W फास्ट चार्जर
• १ x वापरकर्ता मॅन्युअल (हे दस्तऐवज)

Image: The package contents include the docking station, two USB cables (one for data, one for power), a 33W fast charger, and the user manual.

उत्पादन संपलेview

The BENFEI Dual Bay Docking Station is designed for efficient data management and drive cloning. It supports both 2.5" and 3.5" SATA I/II/III HDDs and SSDs.

Image: The BENFEI Dual Bay Hard Drive Docking Station, shown with a 3.5-inch HDD and a 2.5-inch SSD inserted, along with its power adapter and USB data cable.

प्रमुख वैशिष्ट्ये:

• Dual-Bay Operation: Simultaneously read, write, and transfer data between two 2.5" or 3.5" HDD/SSD drives.
• One-Button Offline Clone: Duplicate drives without connecting to a computer.
• हाय-स्पीड डेटा ट्रान्सफर: Up to 5Gbps with USB 3.1 Gen 1 and UASP support.
• स्थिर वीज पुरवठा: Dedicated 12V/2.5A power adapter ensures reliable operation.
• साधन-मुक्त स्थापना: Easy insertion and removal of drives.
• विस्तृत सुसंगतता: Supports Windows, macOS, Linux, and Android systems.

सेटअप सूचना

डॉकिंग स्टेशनला जोडणे:

1. हार्ड ड्राइव्ह घाला: Gently slide your 2.5" or 3.5" SATA HDD/SSD into the drive bays (Slot A and/or Slot B) until securely seated. Ensure the power switch on the back of the docking station is in the OFF position before inserting or removing drives.
2. वीज कनेक्ट करा: Use the white USB-C to USB-C cable to connect the included 33W Fast Charger to the "USB-C Power in" port on the back of the docking station. Plug the charger into a power outlet.
3. Connect to Computer (for Read & Write function): Use the black USB-A/C to USB-C cable to connect the "USB 3.0-C" port on the back of the docking station to an available USB port on your computer.
4. पॉवर चालू: Press the power button located on the back of the docking station. The indicator lights will illuminate.

प्रतिमा: सविस्तर view of the BENFEI docking station, highlighting the SATA ports (A for Source, B for Target), Copy Button, Disk A/B Indicators, Power Button, USB 3.0-C port, and USB-C Power In port. This image also shows the included USB-A to USB-C and USB-C to USB-C cables.

ऑपरेटिंग सूचना

1. Read & Write Function (PC Mode)

This mode allows you to access and manage data on your drives via a connected computer.

1. Ensure the docking station is set up as described in the "Setup Instructions" and connected to your computer.
2. Insert your 2.5" or 3.5" HDD/SSD into either Slot A or Slot B (or both).
3. डॉकिंग स्टेशनवर पॉवर.
4. Your computer's operating system should detect the drives automatically. You can now access them like any other external storage device.
5. महत्त्वाची सूचना: For new SSDs, you may need to initialize them through your computer's Disk Management (Windows) or Disk Utility (macOS) before they appear.

Image: The BENFEI docking station connected to a laptop via USB-C, illustrating high-speed data transmission at 5Gbps. A 3.5-inch HDD and a 2.5-inch SSD are inserted into the bays.

2. Offline Clone Function (No PC Required)

This function allows you to duplicate a source drive to a target drive without needing a computer connection.

1. तयारी:
   • Ensure the docking station is नाही संगणकाशी जोडलेले.
   • घाला सोर्स डिस्क (the drive you want to copy FROM) into स्लॉट ए.
   • घाला लक्ष्य डिस्क (the drive you want to copy TO) into स्लॉट बी.
   • महत्त्वाचे: The capacity of the Target Disk must be equal to or larger than the Source Disk. Any data on the Target Disk will be overwritten during the cloning process. Back up any important data from the Target Disk before proceeding.
2. Start Cloning:
   • पॉवर स्विच चालू असल्याची खात्री करा.
   • Press and hold the "CLONE" button for approximately 3 seconds until the progress indicator LEDs (25%, 50%, 75%, 100%) begin to flash.
   • Release the button, then press it again quickly to confirm and start the cloning process.
3. प्रगतीचे निरीक्षण करा: The progress indicator LEDs will illuminate sequentially (25%, 50%, 75%, 100%) to show the cloning status.
4. पूर्णता: All four progress LEDs will remain solid when the cloning process is complete.
5. वीज बंद: Once cloning is finished, turn off the power switch before removing the drives.

Image: A visual guide to the offline clone function, showing a source drive in Slot A and a target drive in Slot B, with an arrow indicating data flow from A to B. Important notes about target drive capacity and data backup are also displayed.

Image: A two-part diagram detailing the "Read & Write Function" and "Offline Clone Function" steps. The Read & Write section shows inserting drives, connecting power, connecting to a computer, and powering on. The Offline Clone section shows inserting drives, pressing the clone button, and the completion status.

सुसंगतता

समर्थित प्रणाली:

• खिडक्या
• macOS
• लिनक्स
• Android

समर्थित ड्राइव्ह:

• 2.5" SATA I/II/III HDDs and SSDs
• 3.5" SATA I/II/III HDDs and SSDs

Image: An illustration demonstrating the wide compatibility of the BENFEI docking station with various operating systems (Windows, macOS, Linux, Android) and different types and sizes of SATA HDDs and SSDs (2.5-inch and 3.5-inch).

देखभाल

• Keep the docking station clean and free from dust. Use a soft, dry cloth for cleaning.
• डिव्हाइसला अत्यंत तापमान, आर्द्रता किंवा थेट सूर्यप्रकाशात उघड करणे टाळा.
• स्वतः डिव्हाइस वेगळे करण्याचा किंवा दुरुस्त करण्याचा प्रयत्न करू नका. पात्र सेवा कर्मचाऱ्यांचा संदर्भ घ्या.
• Always turn off the power switch before inserting or removing drives to prevent data corruption or damage to the drives/docking station.

समस्यानिवारण

संगणकाला आढळलेले ड्राइव्हस्:

• Ensure the docking station is powered on and the USB data cable is securely connected to both the docking station and your computer.
• Verify that the drives are properly seated in the bays.
• For new drives, they may need to be initialized and formatted through your operating system's disk management utility (e.g., Disk Management in Windows, Disk Utility in macOS).
• Try connecting the docking station to a different USB port on your computer.
• Test with a different USB data cable if available.

Offline clone fails or does not start:

• Ensure the docking station is नाही connected to a computer during the cloning process.
• Verify that the Source Disk is in Slot A and the Target Disk is in Slot B.
• Confirm that the Target Disk's capacity is equal to or larger than the Source Disk's capacity.
• Ensure there are no bad blocks on the source disk. A damaged source disk can cause cloning to fail.
• Make sure you press and hold the CLONE button for 3 seconds until LEDs flash, then press it again quickly to confirm.

डेटा ट्रान्सफरचा वेग कमी:

• Ensure you are using a USB 3.0 or higher port on your computer.
• Verify that the black USB-A/C to USB-C data cable is used for data connection, not the white power cable.
• The actual transfer speed can be affected by the performance of your hard drives and your computer's system.

तपशील

Image: The BENFEI docking station displayed with its physical dimensions: 6.3 inches (160 mm) length, 4.4 inches (111 mm) width, and 2.4 inches (62 mm) height, alongside a smartphone and laptop for scale.

हमी आणि समर्थन

The BENFEI Hard Drive Docking Station is backed by an exclusive ६ महिन्यांची वॉरंटी. For technical support, warranty claims, or any inquiries, please contact BENFEI customer support. Contact information can typically be found on the official BENFEI webसाइटवर किंवा तुमच्या खरेदी प्लॅटफॉर्मद्वारे.

अधिक माहितीसाठी, भेट द्या BENFEI Store on Amazon.