1. परिचय
The FLSUN S1 Pro is an advanced FDM Delta 3D printer designed for high-speed and high-precision additive manufacturing. It features an ultra-fast printing speed of up to 1200mm/s and an acceleration of 40,000mm/s², significantly reducing print times. Equipped with Klipper firmware, a 7-inch smart touch screen, and a 350℃ all-metal hotend, the S1 Pro supports a wide range of filaments, including high-performance engineering materials. Its large build volume of Φ320*320*430 mm³ accommodates substantial projects. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your FLSUN S1 Pro 3D Printer.
प्रतिमा 1.1: समोर view of the FLSUN S1 Pro 3D Printer, showcasing its sleek design and enclosed build chamber.
२. बॉक्समध्ये काय आहे?
अनपॅक करताना, कृपया सर्व घटक उपस्थित आहेत का ते तपासा:
- FLSUN S1 Pro 3D Printer (main unit)
- फिलामेंट ड्रायर बॉक्स
- पॉवर केबल
- यूएसबी केबल
- Tool Kit (various wrenches, screwdrivers, etc.)
- Sample फिलामेंट
- वापरकर्ता मॅन्युअल (हा दस्तऐवज)
- द्रुत प्रारंभ मार्गदर्शक
Image 2.1: The FLSUN S1 Pro 3D Printer and its included accessories, demonstrating its 95% pre-assembled state.
४. सेटअप सूचना
The FLSUN S1 Pro is designed for quick setup, being 95% pre-assembled. The initial setup typically takes less than 10 minutes.
- अनपॅक करणे: पॅकेजिंगमधून प्रिंटर आणि सर्व अॅक्सेसरीज काळजीपूर्वक काढा.
- प्लेसमेंट: Place the printer on a stable, level surface in a well-ventilated area.
- विधानसभा: Install the door and glass panels as per the instructions in the detailed स्थापना पुस्तिका (पीडीएफ).
- वीज कनेक्शन: Connect the power cable to the printer and a suitable power outlet.
- प्रारंभिक पॉवर चालू: Turn on the printer using the main power switch. The device will perform self-checks to ensure stability.
- स्वयंचलित स्तरीकरण: The printer features automatic leveling. Follow the on-screen prompts on the 7-inch touch screen to initiate and complete the leveling process. This ensures optimal print bed calibration.
- फिलामेंट लोडिंग: Load your desired filament into the filament dryer box and then guide it into the extruder as instructed on the display.
- नेटवर्क जोडणी: Connect the printer to your local Wi-Fi network via the touch screen interface for remote monitoring and control.
तपशीलवार दृश्य सूचनांसाठी, कृपया अधिकृत पहा स्थापना पुस्तिका (पीडीएफ).
4. ऑपरेटिंग सूचना
4.1 User Interface and Control
The FLSUN S1 Pro utilizes a 7-inch Klipper firmware smart touch screen for intuitive control. The visual operation interface allows for smart adjustment and monitoring directly from the printer. Additionally, with advanced Microtac radar control and Wi-Fi connectivity, you can monitor and control your printer in real-time from mobile phones and PCs.
Image 4.1: Remote control and monitoring capabilities via the FLSUN World app on a mobile device.
- रिमोट कंट्रोल: Manage your printers remotely from anywhere.
- Tap it, Print it, Like it: Start printing tasks with a quick tap on the FLSUN World app, utilizing cloud storage for G-code files.
- Monitor in Pocket: Real-time checking of your printing progress.
- Smart Reminder: Receive notifications when print errors occur.
३.३ छपाई प्रक्रिया
- Prepare Model: Use compatible slicing software (FLSUN Slicer V2.0 or other slicers like PrusaSlicer, Cura) to prepare your 3D model. Ensure settings are optimized for the S1 Pro's capabilities, including its high speed and acceleration.
- हस्तांतरण File: Transfer the sliced G-code file to the printer via USB or Wi-Fi (FLSUN World app).
- प्रिंट सुरू करा: निवडा file on the touch screen or through the app and initiate the print.
- देखरेख: Utilize the built-in camera for real-time monitoring and time-lapse recording. The printer's low noise level (55dB) ensures a quiet operating environment.
- Power-Off Resume: In case of power interruption, the printer supports power-off continuous printing, resuming from where it left off. Vibration compensation further ensures print quality.
Image 4.2: Illustration of the FLSUN S1 Pro's epic speed capabilities: 1200mm/s max printing speed, 40000mm/s² max acceleration, and 110mm³/s peak flow rate.
Image 4.3: Key features for smooth and consistent printing, including AI-powered functions, auto-leveling, spaghetti detection, and perfect first layer adhesion.
Image 4.4: Advanced features like the Air Filter, Filament Dryer, Built-in camera, Intelligent Zoned Heating, and 16GB EMMC storage.
5. देखभाल
Regular maintenance ensures the longevity and optimal performance of your FLSUN S1 Pro 3D Printer.
- स्वच्छता: Regularly clean the print bed, nozzle, and internal components to prevent debris buildup. Use a soft cloth and appropriate cleaning solutions.
- एअर फिल्टर: The printer is equipped with a combined HEPA + activated carbon air filter. Check and replace the filter periodically as needed to maintain air quality and prevent odors.
- Filament Dryer Box: Ensure the filament dryer box is functioning correctly to keep your filament dry, which is crucial for print quality.
- नोजल तपासणी: Periodically inspect the 0.4mm hardened steel nozzle for wear or clogs. Replace if necessary. The all-metal hot end can reach up to 350°C, supporting various high-temperature filaments.
- स्नेहन: Refer to the detailed manual for any lubrication requirements for moving parts.
Image 5.1: Diagram illustrating the 350°C hotend, 50°C chamber, and 120°C hot bed for optimal material handling.
6. समस्या निवारण
हा विभाग ऑपरेशन दरम्यान तुम्हाला येऊ शकणाऱ्या सामान्य समस्यांचे निराकरण करतो.
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| Print Not Sticking to Bed | Improper bed leveling, dirty print surface, incorrect bed temperature. | Re-run auto-leveling. Clean the print surface with isopropyl alcohol. Adjust hot bed temperature according to filament type (Max 120°C). |
| Filament Clogging | Dust in filament, incorrect hotend temperature, worn nozzle, heat creep. | Ensure filament is dry (use filament dryer). Verify hotend temperature (Max 350°C). Clean or replace nozzle. Check cooling fan operation. |
| "Spaghetti" Prints | Poor bed adhesion, model detaching, extrusion issues. | The S1 Pro features स्पेगेटी शोध. Ensure proper bed adhesion. Monitor print progress via the built-in camera. |
| प्रिंटर प्रतिसाद देत नाही | Software glitch, loose connection, power issue. | Restart the printer. Check all cable connections. Ensure stable power supply. |
| खराब मुद्रण गुणवत्ता | Incorrect slicing settings, worn nozzle, vibration, wet filament. | Optimize slicing parameters. Replace nozzle if worn. The printer has कंपन भरपाई; ensure it's active. Use filament dryer. |
Image 6.1: Features like the 55dB quiet fan and Power Off Resume Print (UPS) contribute to a reliable printing experience.
7. तांत्रिक तपशील
| श्रेणी | तपशील | तपशील |
|---|---|---|
| सामान्य | कमाल मुद्रण गती | १०० मिमी/से |
| कमाल प्रवेग | 40000mm/s² | |
| पीक फ्लो रेट | ११० मिमी³/सेकंद | |
| खंड तयार करा | Φ320*320*430 mm³ (Maximum height of the cylinder: 383mm) | |
| चेंबर | बंद | |
| आवाज पातळी | 55dB | |
| साधन प्रमुख | नोझल | 0.4mm Hardened Steel Nozzle (supports various nozzle sizes) |
| Max Hot End Temp | 350℃ | |
| फिलामेंट व्यास | 1.75 मिमी | |
| फिलामेंट | समर्थित फिलामेंट | Ideal: PLA, PETG, TPU. Satisfactory: ABS, ASA, PA, PC, PET. Capable: Carbon/Glass Fiber Reinforced PLA, PPS-CF, PPA-CF/GF. |
| Active Heating Dry Box | होय | |
| फिलामेंट क्लोग डिटेक्शन | होय | |
| गरम पाण्याची सोय | बिल्ड प्लेट | टेक्सचर्ड पीईआय प्लेट |
| Max Build Plate Temp | 120℃ | |
| स्मार्ट झोन हीटिंग | Inner Circle Ø220mm, Outer Ring 220-320mm | |
| इलेक्ट्रॉनिक्स | डिस्प्ले | 7" Color Touch Screen |
| स्टोरेज | 16GB EMMC, 32GB USB Flash | |
| वीज पुरवठा | 110-240V, 50/60Hz | |
| ऑन-मोड उर्जा | 400 वॅट्स | |
| सॉफ्टवेअर | फर्मवेअर अपग्रेड | OTA (ओव्हर-द-एअर) |
| स्लाइसिंग सॉफ्टवेअर | FLSUN Slicer V2.0, Other Slicers | |
| समर्थित OS | मॅकओएस, विंडोज | |
| वैशिष्ट्ये | देखरेख कॅमेरा | Realtime, Timelapse |
| फिलामेंट डिटेक्शन | होय | |
| कंपन भरपाई | होय | |
| मोडतोड शोध | होय | |
| स्पेगेटी शोध | होय | |
| Screen Auto Sleep | होय | |
| Printer Auto Power Off | होय | |
| स्वयं-स्तरीकरण | होय | |
| पॉवर लॉस पुनर्प्राप्त | Yes (Z lift, Backup Battery) | |
| एअर फिल्टर | HEPA + Activated Carbon | |
| भौतिक परिमाण | उत्पादनाचे परिमाण (D x W x H) | २.७"उत्तर x २.७"पाऊंड x १.०७"उत्तर (अंदाजे ६८ मिमी x ६८ मिमी x २७ मिमी) |
| Physical Dimension (Printer) | 550*596*1030 मिमी | |
| आयटम वजन | ३.७४ पौंड (अंदाजे १.७ किलो) | |
| रंग | काळा |
Image 7.1: Comprehensive technical specifications for the FLSUN S1 Pro 3D Printer.
8. हमी आणि समर्थन
FLSUN is committed to providing reliable products and excellent customer service.
- परतावा: The product is eligible for 30-day easy returns. Please refer to the retailer's return policy for specific details.
- ग्राहक समर्थन: For technical assistance, troubleshooting, or warranty inquiries, please contact FLSUN Customer Support. You can often find support resources and contact information on the official FLSUN webसाइटवर किंवा उत्पादन खरेदी केलेल्या किरकोळ विक्रेत्याद्वारे.
- संरक्षण योजना: Extended protection plans, such as a 4-Year Protection Plan, may be available for purchase separately to provide additional coverage beyond the standard warranty.
- ऑनलाइन संसाधने: ला भेट द्या Amazon वर FLSUN स्टोअर for additional product information, FAQs, and support.
