ANENG AT619 Voice Broadcast Multimeter Clamp मीटर वापरकर्ता मॅन्युअल

1. परिचय

This user manual provides essential information for the safe and efficient operation of your ANENG AT619 Voice Broadcast Multimeter Clamp Meter. Please read this manual thoroughly before using the device and retain it for future reference. This device is designed for measuring AC/DC voltage, AC/DC current (via clamp), resistance, capacitance, frequency, temperature, and for continuity and diode tests, featuring a voice broadcast function for readings.

1.1 सुरक्षितता माहिती

मीटरला वैयक्तिक इजा किंवा नुकसान टाळण्यासाठी नेहमी खालील सुरक्षा खबरदारीचे पालन करा:

• प्रत्येक मापन श्रेणीसाठी निर्दिष्ट केलेल्या कमाल इनपुट मूल्यांपेक्षा जास्त करू नका.
• व्हॉल्यूमसह काम करताना अत्यंत सावधगिरी बाळगाtag30V AC RMS, 42V पीक किंवा 60V DC पेक्षा जास्त. हे व्हॉल्यूमtages एक शॉक धोका ठरू.
• Ensure the test leads are in good condition and properly seated before making any measurements.
• Do not use the meter if it appears damaged or if the case is open.
• Always turn off the circuit power and discharge all high-voltage capacitors before measuring resistance, continuity, diodes, or capacitance.
• Use the correct function and range for each measurement.
• Observe all local and national safety codes.

2. उत्पादनाची वैशिष्ट्ये

The ANENG AT619 Multimeter Clamp Meter offers a range of functionalities for electrical testing:

• Voice Broadcast Function: Announces measurement readings for convenience.
• Multi-functional Measurement: Capable of measuring AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature.
• संपर्क नसलेले खंडtage (NCV) शोध: थेट संपर्काशिवाय जिवंत तारा ओळखण्यासाठी.
• Clamp Meter Design: Allows for non-invasive current measurement.
• सातत्य आणि डायोड चाचणी: सर्किट डायग्नोस्टिक्ससाठी आवश्यक.
• मोठा एलसीडी डिस्प्ले: Clear digital readout with 4000 counts.
• Data Hold and Relative Measurement (REL): For convenient data analysis.
• Automatic Range Selection: Simplifies operation by automatically selecting the appropriate measurement range.

३. घटक आणि नियंत्रणे

Figure 1: ANENG AT619 Voice Broadcast Multimeter Clamp Meter. This image displays the front view of the ANENG AT619 clamp meter, highlighting its red clamp jaws, rotary dial, LCD screen, function buttons, and input terminals.

Familiarize yourself with the following components:

• Clamp जबडा: संपर्क नसलेल्या एसी/डीसी करंट मापनासाठी वापरले जाते.
• रोटरी डायल: Selects the desired measurement function (e.g., V, A, Ω, Hz, NCV, OFF).
• एलसीडी डिस्प्ले: Shows measurement readings, units, and function indicators (e.g., AUTO, AC, DC, MAX/MIN).
• फंक्शन बटणे:
  • H/∗ (Hold/Backlight): Freezes the current reading on the display. Long press for backlight.
  • REL (Relative): संग्रहित मूल्य आणि वर्तमान वाचन यातील फरक मोजते.
  • सेट: Used for selecting sub-functions within a rotary dial position (e.g., AC/DC, Diode/Continuity).
• इनपुट टर्मिनल:
  • COM (सामान्य): Negative input terminal for all measurements.
  • VΩHz: व्हॉल्यूमसाठी सकारात्मक इनपुट टर्मिनलtage, resistance, frequency, capacitance, diode, and continuity measurements.
  • °C°F: Input for temperature probe.
• एनसीव्ही सेन्सर: Located near the top of the meter for non-contact voltage शोध.

4. सेटअप

Before first use, ensure the battery is correctly installed and the test leads are ready.

4.1 बॅटरी इंस्टॉलेशन

The ANENG AT619 typically uses AAA batteries. Locate the battery compartment on the back of the device, open it, insert the batteries according to the polarity indicators, and securely close the compartment.

४.२ चाचणी लीड्स कनेक्ट करणे

बहुतेक मोजमापांसाठी (खंडtage, resistance, continuity, diode, capacitance, frequency), insert the black test lead into the COM टर्मिनल आणि रेड टेस्ट लीड मध्ये VΩHz terminal. For temperature measurements, connect the temperature probe to the designated terminals.

5. ऑपरेटिंग सूचना

Always select the correct function before making a measurement.

5.1 पॉवर चालू/बंद

Turn the rotary dial from the "OFF" position to any desired measurement function to power on the meter. To power off, turn the dial back to "OFF".

5.2 AC/DC व्हॉल्यूमtagई मापन (V)

1. Set the rotary dial to the "V" position. The meter will typically auto-detect AC or DC. Use the "SET" button if manual selection is needed.
2. Connect the test leads in parallel to the circuit or component being measured.
3. खंड वाचाtagएलसीडी डिस्प्लेवरील e मूल्य.

5.3 AC/DC Current Measurement (A) - Clamp कार्य

1. Set the rotary dial to the "A" position. Use the "SET" button to select AC or DC current.
2. cl उघडाamp jaws and enclose only one conductor of the circuit. Ensure the jaws are fully closed.
3. LCD डिस्प्लेवरील वर्तमान मूल्य वाचा.

५.४ प्रतिकार मापन (Ω)

1. Set the rotary dial to the "Ω" position.
2. Ensure the circuit is de-energized and all capacitors are discharged.
3. मोजण्यासाठी घटकावर चाचणी लीड्स जोडा.
4. Read the resistance value.

5.5 सातत्य चाचणी

1. Set the rotary dial to the "Ω" position and press "SET" until the continuity symbol (speaker icon) is displayed.
2. सर्किट डी-एनर्जाइज्ड असल्याची खात्री करा.
3. Connect the test leads across the circuit or component. A continuous beep indicates continuity (low resistance).

5.6 गैर-संपर्क खंडtage (NCV) शोध

1. Set the rotary dial to the "NCV" position.
2. Move the NCV sensor near the conductor or outlet. The meter will indicate the presence of AC voltage with an audible beep and/or visual indicator.

5.7 Voice Broadcast Function

The ANENG AT619 automatically broadcasts the measured value after a stable reading is obtained. Ensure the meter's speaker is not obstructed for clear audio output.

6. देखभाल

6.1 स्वच्छता

Wipe the meter's case with a damp कापड आणि सौम्य डिटर्जंट. अ‍ॅब्रेसिव्ह किंवा सॉल्व्हेंट्स वापरू नका. वापरण्यापूर्वी मीटर पूर्णपणे कोरडे असल्याची खात्री करा.

6.2 बॅटरी बदलणे

When the low battery indicator appears on the display, replace the batteries promptly to ensure accurate readings. Refer to section 4.1 for battery installation instructions.

6.3 फ्यूज बदलणे

The ANENG AT619 may contain internal fuses for protection. If a fuse blows, it must be replaced with a fuse of the same type and rating. Refer to the specifications for fuse details. Fuse replacement should only be performed by qualified personnel.

7. समस्या निवारण

• मीटर चालू होत नाही: बॅटरीची स्थापना आणि चार्ज पातळी तपासा. आवश्यक असल्यास बॅटरी बदला.
• No reading or "OL" (Overload) displayed:
  • Ensure test leads are properly connected and making good contact.
  • Verify the correct function and range are selected.
  • For resistance/continuity, ensure the circuit is de-energized.
• चुकीचे वाचन:
  • बॅटरी पातळी तपासा.
  • Ensure test leads are not damaged.
  • Verify the meter is not exposed to strong electromagnetic fields.
• Voice broadcast not working: Check if the speaker is obstructed or if the volume setting (if available) is too low.

8. तपशील

9. हमी आणि समर्थन

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer. Keep your proof of purchase for warranty claims.