VEVOR Electric Crepe Maker HT-2E Instruction Manual

1. महत्त्वाच्या सुरक्षितता सूचना

Please read all instructions carefully before using this appliance to ensure safe and efficient operation. Retain this manual for future reference.

• विद्युत सुरक्षा: वीज पुरवठा व्हॉल्यूमशी जुळत असल्याची खात्री कराtage specified on the appliance. Do not operate with a damaged cord or plug. Keep the appliance away from water or other liquids to prevent electric shock.
• उष्णता सुरक्षा: The cooking plates become extremely hot during operation. Use caution and avoid direct contact with hot surfaces. Always use heat-resistant gloves or utensils. Allow the appliance to cool completely before cleaning or storing.
• प्लेसमेंट: Place the crepe maker on a stable, heat-resistant, and level surface. Ensure adequate ventilation around the appliance. Do not place near flammable materials.
• मुले आणि पर्यवेक्षण: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
• स्वच्छता: Disconnect from power supply before cleaning. Do not immerse the appliance in water. Refer to the cleaning section for proper maintenance.

2. उत्पादन संपलेview

The VEVOR HT-2E Electric Crepe Maker is a commercial-grade appliance designed for efficient crepe and pancake preparation. It features two independent heating plates and controls for versatile cooking.

Figure 2.1: VEVOR Electric Crepe Maker (Model HT-2E)

घटक:

• Dual Heating Plates: Two 16-inch (400mm) non-stick cooking surfaces.
• Independent Temperature Controls: Separate knobs for each plate, allowing temperature adjustment from 122°F to 572°F (50°C to 300°C).
• उर्जा संकेतक: Lights to show when the unit is powered on.
• Heat Indicators: Lights to show when the heating elements are active and when the set temperature is reached.
• स्टेनलेस स्टील बॉडी: Durable and easy-to-clean housing.
• ड्रिप ट्रे: Removable tray to collect overflow and facilitate cleaning.

Figure 2.2: Thoughtful Design Features

The design includes features such as a sturdy stainless steel body, overflow channels to manage batter spills, and a compact form factor for countertop use.

3. तांत्रिक तपशील

आकृती ३.१: उत्पादनाचे परिमाण आणि समाविष्ट अॅक्सेसरीज

Included components: 1 x Electric Crepe Maker, various accessories (brushes, food clips, whisk, plastic scraper, wooden spreaders, sponges).

३. सेटअप आणि पहिला वापर

4.1 अनपॅक करणे

1. Carefully remove the crepe maker and all accessories from the packaging.
2. Inspect the appliance for any damage during transit. If damage is found, do not operate and contact customer support.
3. Remove all packaging materials, stickers, and protective films from the unit.

4.2 प्रारंभिक साफसफाई

1. जाहिरातीसह नॉन-स्टिक कुकिंग प्लेट्स पुसून टाकाamp cloth or sponge and mild detergent. Rinse thoroughly with a clean, damp कापड
2. Dry the plates completely before use.
3. Clean the stainless steel body with a damp कापड

4.3 प्लेसमेंट

1. Place the crepe maker on a stable, level, and heat-resistant countertop.
2. Ensure there is sufficient space around the appliance for ventilation (at least 6 inches / 15 cm on all sides).
3. Plug the power cord into a grounded electrical outlet that matches the appliance's voltagई आवश्यकता.

5. ऑपरेशन

5.1 तापमान नियंत्रण

The crepe maker features two independent temperature control knobs, one for each cooking plate. This allows you to cook at different temperatures simultaneously or keep one plate warm while using the other.

Figure 5.1: Temperature Control Knob

• Turn the knob clockwise to increase the temperature and counter-clockwise to decrease it.
• तापमान श्रेणी ३७°F ते ६१°F (३°C ते १६°C) आहे.
• The heat indicator light will illuminate when the heating elements are active and turn off when the set temperature is reached. It will cycle on and off during operation to maintain the temperature.

5.2 Making Crepes/Pancakes

1. Ensure the crepe maker is plugged in and placed on a stable surface.
2. Turn the temperature control knob(s) to your desired cooking temperature. Allow the plates to preheat until the heat indicator light turns off (approximately 3-5 minutes).
3. Lightly grease the non-stick cooking plate with a small amount of cooking oil or butter, if desired, for the first crepe.
4. Pour a ladle of crepe batter onto the center of the hot plate.
5. Immediately use a wooden spreader (provided) to spread the batter evenly in a circular motion to form a thin crepe.
6. Cook for approximately 1-2 minutes, or until the edges begin to crisp and the surface appears set.
7. Using a spatula, gently flip the crepe and cook the other side for another 30-60 seconds, or until golden brown.
8. Remove the cooked crepe from the plate and repeat the process for additional crepes.

Figure 5.2: Crepe Making Process

४.४ सूचनात्मक व्हिडिओ

This video provides a visual guide to operating the crepe maker, including setup and cooking techniques.

6. स्वच्छता आणि देखभाल

Regular cleaning and proper maintenance will extend the life of your VEVOR Electric Crepe Maker.

८.१ प्रत्येक वापरानंतर स्वच्छता

1. उपकरण बंद करा आणि पॉवर आउटलेटमधून अनप्लग करा.
2. Allow the cooking plates to cool completely before cleaning.
3. मऊ ब्रश वापरा किंवा डीamp cloth to wipe away any food residue from the non-stick plates. For stubborn residue, a small amount of mild dish soap can be used, followed by wiping with a clean, damp कापड
4. Do not use abrasive cleaners, metal scouring pads, or sharp objects, as these can damage the non-stick coating.
5. ड्रिप ट्रे काढा आणि रिकामा करा. पुन्हा घालण्यापूर्वी ते कोमट, साबणयुक्त पाण्याने धुवा, स्वच्छ धुवा आणि चांगले वाळवा.
6. Wipe the stainless steel exterior with a clean, damp कापड

Figure 6.1: Cleaning the Non-Stick Plates

५.८.१ स्टोरेज

Ensure the crepe maker is clean and completely dry before storing. Store in a cool, dry place, away from direct sunlight and moisture.

7. समस्या निवारण

If you encounter issues with your crepe maker, refer to the following common problems and solutions:

७. वॉरंटी आणि ग्राहक समर्थन

VEVOR products are designed for durability and performance. For warranty information, technical assistance, or any questions regarding your VEVOR Electric Crepe Maker, please contact VEVOR customer support through their official webज्या साइटवर किंवा किरकोळ विक्रेत्याकडे उत्पादन खरेदी केले होते.

Please have your model number (HT-2E) and purchase information ready when contacting support.