हेंडी ब्लेंडर वापरकर्ता मॅन्युअल

1. उत्पादन संपलेview

The HENDI Blender is a versatile kitchen appliance designed for efficient blending of fruits and vegetables, preparing cocktails, smoothies, and even crushing ice. It features a robust design with advanced safety mechanisms and intuitive controls.

Figure 1: HENDI Blender - Main Unit

This image shows the HENDI Blender from the front, highlighting its sleek black base with an electronic touch panel and the clear 2.5-liter pitcher with its lid and tamper ठिकाणी.

प्रमुख वैशिष्ट्ये:

• शक्तिशाली मिश्रण: Suitable for a wide range of ingredients, including ice.
• Large Capacity Pitcher: Comes with a durable, transparent 2.5-liter polycarbonate pitcher.
• Tamper समाविष्ट: A polypropylene tamper is provided for processing denser or larger ingredients.
• टिकाऊ बांधकाम: Features an ABS housing, polycarbonate lid, and a removable AISI 420 stainless steel blade with titanium coating.
• तापमान प्रतिकार: Designed to withstand temperatures from -40°C to 90°C.
• सुरक्षितता वैशिष्ट्ये: Equipped with overheating and electrical overload protection, and a safety locking system to prevent accidental operation without the pitcher.
• Electronic Control Panel: Easy-to-use touch panel with 3 speed levels (8,350 to 24,800 rpm) and 3 timer settings (30, 45, 90 seconds).

2. महत्त्वाच्या सुरक्षितता सूचना

उपकरण वापरण्यापूर्वी कृपया सर्व सुरक्षा सूचना काळजीपूर्वक वाचा. या सूचनांचे पालन न केल्यास विजेचा धक्का, आग किंवा गंभीर दुखापत होऊ शकते.

• विद्युत सुरक्षा:
  • व्हॉल्यूमची खात्री कराtagउपकरणावर दर्शविलेले e कनेक्ट करण्यापूर्वी तुमच्या स्थानिक वीज पुरवठ्याशी जुळते.
  • मोटर बेस पाण्यात किंवा इतर कोणत्याही द्रवात बुडवू नका.
  • भाग साफ करण्यापूर्वी, असेंबल करण्यापूर्वी किंवा वेगळे करण्यापूर्वी ब्लेंडर नेहमी पॉवर आउटलेटमधून अनप्लग करा.
  • खराब झालेल्या कॉर्ड किंवा प्लगने ब्लेंडर चालवू नका.
• ब्लेड सुरक्षा:
  • The blades are extremely sharp. Handle with extreme care during assembly, disassembly, and cleaning.
  • Never touch the blades while the appliance is plugged in or operating.
• ऑपरेशन सुरक्षा:
  • Always ensure the pitcher is securely locked onto the motor base before starting the blender. The safety locking system prevents operation if not properly installed.
  • Do not overfill the pitcher. Refer to the MAX fill line.
  • Do not operate the blender continuously for extended periods to prevent motor overheating. The appliance has built-in overheating protection.
  • टी वापराamper only when the lid is securely in place and the blender is running. Do not use other utensils.
  • Keep hands and utensils out of the pitcher while blending.
• तापमान विचार:
  • The pitcher is resistant to temperatures from -40°C to 90°C. Avoid blending extremely hot liquids above 90°C.

3. उत्पादन घटक

Familiarize yourself with the main parts of your HENDI Blender:

1. मोटर बेस: Contains the motor, electronic controls, and safety locking mechanism.
2. 2.5L Pitcher: Transparent polycarbonate container with integrated blades.
3. झाकण: Secures the pitcher during operation, with an opening for the tampएर
4. Tamper: Used to push ingredients towards the blades during blending.
5. ब्लेड असेंब्ली: Removable AISI 420 stainless steel blades with titanium coating.

आकृती 2: स्फोट View of Blender Components

This image illustrates the main components of the HENDI Blender: the motor base, the 2.5-liter pitcher with its integrated blade assembly, the lid, and the tampएर

4. सेटअप

Follow these steps to set up your blender for first use:

1. अनपॅक करा: पॅकेजिंगमधील सर्व घटक काळजीपूर्वक काढा. भविष्यातील साठवणूक किंवा वाहतुकीसाठी पॅकेजिंग ठेवा.
2. स्वच्छ: Before first use, wash the pitcher, lid, and tamper with warm soapy water. Rinse thoroughly and dry. Wipe the motor base with a damp कापड
3. प्लेसमेंट: Place the motor base on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
4. Assemble Pitcher: Ensure the blade assembly is securely attached to the bottom of the pitcher.
5. Attach Pitcher to Base: Place the pitcher onto the motor base. Rotate it slightly until it clicks into place, engaging the safety locking system. The blender will not operate if the pitcher is not correctly seated.
6. वीज कनेक्ट करा: पॉवर कॉर्ड योग्य इलेक्ट्रिकल आउटलेटमध्ये (२४० व्ही) प्लग करा.

5. ऑपरेटिंग सूचना

Your HENDI Blender features an electronic touch panel for easy operation.

Figure 3: Blender Ready for Operation with Ingredients

This image shows the HENDI Blender with fresh berries inside the pitcher, demonstrating its readiness for blending various ingredients.

1. साहित्य जोडा: Place your desired ingredients into the pitcher. Do not exceed the maximum fill line. For best results, add liquids first, then soft ingredients, and finally harder ingredients or ice.
2. सुरक्षित झाकण: Place the lid firmly onto the pitcher. Ensure the small cap is also in place or removed if using the tampएर
3. वेग निवडा: Use the electronic touch panel to select one of the three speed levels:
   • कमी: Approximately 8,350 rpm
   • मध्यम: Approximately 13,500 rpm
   • उच्च: Approximately 24,800 rpm
4. टाइमर सेट करा (पर्यायी): Choose one of the preset timer settings: 30, 45, or 90 seconds. The blender will automatically stop after the selected time.
5. मिश्रण सुरू करा: Press the start button on the touch panel.
6. टी वापरूनamper: If ingredients are not circulating, remove the small cap from the lid and use the tamper to push ingredients towards the blades. Never use fingers or other utensils.
7. नाडी कार्य: For short bursts of power or to chop ingredients, use the pulse function. This provides maximum speed as long as the button is pressed.
8. मिश्रण थांबवा: Press the stop button or wait for the timer to complete.
9. Remove Pitcher: Once blending is complete, unplug the blender and carefully remove the pitcher from the base.

6. देखभाल आणि स्वच्छता

नियमित साफसफाई केल्याने इष्टतम कामगिरी सुनिश्चित होते आणि तुमच्या ब्लेंडरचे आयुष्य वाढते.

1. अनप्लग: साफ करण्यापूर्वी नेहमी पॉवर आउटलेटमधून ब्लेंडर अनप्लग करा.
2. वेगळे करणे: Remove the pitcher, lid, and tamper from the motor base.
3. Clean Pitcher and Blades:
   • For easy cleaning, fill the pitcher halfway with warm water and a drop of dish soap. Secure the lid and run the blender on low speed for 30 seconds. Rinse thoroughly.
   • For more thorough cleaning, carefully remove the blade assembly from the pitcher (if detachable). Wash the pitcher, lid, tamper, and blade assembly with warm soapy water. Use a brush for the blades, exercising extreme caution due to their sharpness.
   • All removable parts are dishwasher safe (top rack recommended) or can be hand-washed.
4. स्वच्छ मोटर बेस: मऊ, डी सह मोटर बेस पुसून टाकाamp कापड. मोटर बेस पाण्यात बुडवू नका किंवा त्यावर पाण्याची फवारणी करू नका.
5. कोरडे: ब्लेंडर पुन्हा एकत्र करण्यापूर्वी किंवा साठवण्यापूर्वी सर्व भाग पूर्णपणे कोरडे असल्याची खात्री करा.
6. स्टोरेज: Store the blender in a clean, dry place, away from direct sunlight and heat.

7. समस्या निवारण

If you encounter issues with your HENDI Blender, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact HENDI customer support.

8. तपशील

9. हमी आणि समर्थन

HENDI products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official HENDI webसाइट

रिटर्न पॉलिसी: This product is eligible for returns within 30 days of receipt, as per Amazon's return policy.

ग्राहक समर्थन: For technical assistance, spare parts, or service inquiries, please contact HENDI customer support through their official channels. Information regarding spare parts availability is currently unavailable through general product listings.

You can often find contact details on the manufacturer's webसाइटवर किंवा उत्पादन पॅकेजिंगमध्ये.