EBYTE E32-900T20D LoRa वायरलेस मॉड्यूल सूचना पुस्तिका

1. परिचय

The EBYTE E32-900T20D is a LoRa wireless module designed for long-range, low-power data transmission. It operates in the 868MHz and 915MHz frequency bands, offering robust anti-interference capabilities and extended communication distances up to 5.5 kilometers. This module integrates a serial port interface, making it suitable for various embedded applications requiring reliable wireless connectivity.

आकृती 1: समोर view of the EBYTE E32-900T20D LoRa Wireless Module.

2. प्रमुख वैशिष्ट्ये

• LoRa Spread Spectrum Technology: Utilizes LoRa Direct Sequence Spread Spectrum for enhanced communication range and interference resistance.
• Dual Frequency Bands: Supports both 868MHz and 915MHz operation.
• High Transmit Power: Features a 20dBm (100mW) transmit power output.
• Long Communication Distance: Capable of transmitting data up to 5.5 kilometers in optimal conditions.
• सिरीयल पोर्ट इंटरफेस: Easy integration with microcontrollers via UART (TX, RX).
• एकाधिक कार्य मोड: Offers Transmission, Wake-up, Power Saving, and Deep Sleep modes for flexible power management.

Figure 2: Illustration of LoRa spread spectrum communication benefits.

3. तपशील

Figure 3: E32-900T20D module with physical dimensions.

4. Pin Definitions and Hardware Interface

The E32-900T20D module features a standard pin header for integration. For detailed pinout information, including specific functions for VCC, GND, TX, RX, AUX, M0, and M1 pins, please refer to the official EBYTE E32-900T20D datasheet available on the manufacturer's website. Proper connection of these pins to your microcontroller or host device is crucial for correct operation.

• VCC: वीज पुरवठा इनपुट.
• GND: ग्राउंड कनेक्शन.
• TX: Transmit data output (connects to RX of host).
• आरएक्स: Receive data input (connects to TX of host).
• AUX: Auxiliary pin, often used for status indication (e.g., data ready).
• M0, M1: Mode selection pins, used to configure the module's operating mode.

5. सेटअप आणि कनेक्शन

1. वीज पुरवठा: Connect the VCC pin to a stable power source within the module's specified voltage range. Connect GND to the system ground.
2. सिरीयल कम्युनिकेशन: Connect the module's TX pin to the RX pin of your microcontroller or host device, and the module's RX pin to the TX pin of your host device. Ensure both devices share a common ground.
3. अँटेना कनेक्शन: Securely attach a compatible 868MHz or 915MHz antenna to the module's antenna connector. An improperly connected or missing antenna can damage the module.
4. मोड निवड: Use the M0 and M1 pins to set the desired operating mode. Refer to the datasheet for specific pin configurations for each mode.
5. सॉफ्टवेअर कॉन्फिगरेशन: Configure your host device's UART settings (baud rate, parity, stop bits) to match the module's default or configured settings. The module can often be configured via AT commands through the serial interface.

३.२. ऑपरेटिंग मोड्स

The E32-900T20D module supports four distinct operating modes, each optimized for different application requirements:

• ट्रान्समिशन मोड: This is the standard transparent transmission mode, commonly used for continuous data exchange.
• जागे होण्याची पद्धत: Designed for low-power applications, this mode allows the transmitter to wake up the receiver by automatically adding a wake-up code before data transmission.
• पॉवर सेव्हिंग मोड: In this receiver-only mode, the module consumes less power. It can receive data but cannot initiate transmissions.
• डीप स्लीप मोड: The lowest power consumption mode, where the module's overall power consumption is significantly reduced (e.g., to 2uA), ideal for battery-powered devices requiring minimal activity.

आकृती 4: ओव्हरview of the four working modes.

६. अर्ज परिस्थिती

The E32-900T20D LoRa module's long-range and low-power characteristics make it suitable for a wide range of Internet of Things (IoT) and industrial applications:

• स्मार्ट शेती: Environmental monitoring, irrigation control, livestock tracking.
• वायरलेस रिमोट कंट्रोल: Industrial equipment control, smart home devices.
• Industrial Scene: Sensor data collection, asset tracking, process automation.
• स्मार्ट वेअरेबल्स: Low-power communication for wearable devices.

आकृती 5: उदाamples of application scenarios for the E32-900T20D module.

8. समस्या निवारण

If you encounter issues with your E32-900T20D module, consider the following troubleshooting steps:

• कोणतेही संप्रेषण नाही:
  • वीज पुरवठा व्हॉल्यूम तपासाtage and ground connections.
  • Check serial port wiring (TX to RX, RX to TX).
  • Ensure UART baud rate, data bits, parity, and stop bits match on both devices.
  • Confirm M0 and M1 pins are set correctly for the desired operating mode.
• Short Communication Range:
  • Ensure the antenna is securely connected and is appropriate for the operating frequency (868MHz or 915MHz).
  • Check for physical obstructions between modules.
  • Verify transmit power settings (if configurable).
• मॉड्यूल प्रतिसाद देत नाही:
  • Perform a power cycle.
  • Check for any short circuits or incorrect wiring that might damage the module.

For persistent issues, refer to the official EBYTE datasheet or contact technical support.

9. देखभाल

To ensure the longevity and optimal performance of your E32-900T20D module:

• Keep the module in a dry environment, away from moisture and corrosive substances.
• Avoid exposing the module to extreme temperatures or sudden temperature changes.
• Handle the module with care to prevent physical damage to components or pins.
• Ensure proper ventilation if operating in an enclosed space.

10. हमी आणि समर्थन

The EBYTE E32-900T20D LoRa Wireless Module is manufactured by EBYTE. For detailed warranty information, technical support, and access to the latest datasheets and resources, please visit the official EBYTE webसाइट किंवा त्यांच्या समर्थन कार्यसंघाशी संपर्क साधा.

निर्माता: EBYTE

अधिकृत Webसाइट: http://www.cdebyte.com/

समर्थन ईमेल: service@cdebyte.com वर ईमेल करा