M5Stack K010

M5Stack Core2 IoT डेव्हलपमेंट किट वापरकर्ता मॅन्युअल

मॉडेल: K010

1. परिचय

The M5Stack Core2 is a versatile IoT development kit designed for rapid prototyping and deployment of various applications. It features an ESP32-D0WDQ6-V3 microcontroller, a 2-inch TFT LCD touch screen, and integrated Wi-Fi and Bluetooth connectivity. This manual provides essential information for setting up, operating, and maintaining your Core2 device.

M5Stack Core2 IoT Development Kit hero image

Figure 1.1: M5Stack Core2 IoT Development Kit, showcasing its compact design and display.

२. बॉक्समध्ये काय आहे?

खाली सूचीबद्ध केलेल्या सर्व वस्तू तुमच्या पॅकेजमध्ये समाविष्ट आहेत याची खात्री करा:

M5Stack Core2 and included accessories: USB-C cable and hex wrench

Figure 2.1: Contents of the M5Stack Core2 package, including the Core2 unit, USB-C cable, and hex wrench.

Diagram showing Core2, USB Type-C cable, and hex wrench as package contents

Figure 2.2: Visual representation of the shipping list for the M5Stack Core2.

3. उत्पादन संपलेview

The M5Stack Core2 is built around the ESP32-D0WDQ6-V3 chip, offering robust performance for various applications. Key features include:

तपशीलवार view of M5Stack Core2 with labels for components like touch screen, ESP32, USB-C, SD card, LED, PWR, RST

Figure 3.1: Annotated diagram of the M5Stack Core2, highlighting its main components and interfaces.

समोर view of M5Stack Core2 with callouts for power indicator light, built-in speaker, 16M Flash, 8M PSRAM, and capacitive touch screen

Figure 3.2: Key features of the M5Stack Core2, including memory and display type.

4. तपशील

The following table details the technical specifications of the M5Stack Core2:

तपशीलपॅरामीटर
SoCESP32-D0WDQ6-V3, 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
फ्लॅश16MB
PSRAM8MB
इनपुट व्हॉल्यूमtage5V @ 500mA
होस्ट इंटरफेसप्रकार-सी x १, ग्रोव्ह(I2C+I/O+UART) x १
एलईडीग्रीन पॉवर इंडिकेटर लाइट
बटणेPower button, RST button, screen virtual buttons x 3
कंपन अलर्टकंपन मोटर
आयटम वजन११.३ औंस (अंदाजे ३२० ग्रॅम)
पॅकेजचे परिमाण3.19 x 2.28 x 0.87 इंच
बॅटरीज1 लिथियम आयन बॅटरी (समाविष्ट)
M5Stack Core2 on a digital scale showing 54.9 grams

Figure 4.1: M5Stack Core2 weight measurement.

M5Stack Core2 with dimensions: 54mm x 54mm x 16.5mm

Figure 4.2: M5Stack Core2 dimensions.

5. सेटअप

To begin using your M5Stack Core2, follow these initial setup steps:

  1. चार्जिंग: Connect the M5Stack Core2 to a 5V USB power source using the provided USB Type-C cable. The device will begin charging.
  2. पॉवर चालू: Press and hold the power button (usually located on the side) for approximately 6 seconds to turn on the device.
  3. सॉफ्टवेअर पर्यावरण: The Core2 supports various development environments, including UIFlow, Arduino, and MicroPython. Choose your preferred environment and set up the necessary drivers and IDE on your computer.
  4. First Program: Refer to the official M5Stack documentation for guides on uploading your first program or firmware to the Core2.

6. ऑपरेटिंग सूचना

The M5Stack Core2 is designed for flexible operation depending on your application. Here are general guidelines:

7. देखभाल

Proper maintenance ensures the longevity and optimal performance of your M5Stack Core2:

8. समस्या निवारण

This section addresses common issues you might encounter with your M5Stack Core2.

Q1: What is the maximum supported capacity of the SD card, and why is there no response when the SD card is inserted?
Theoretically, devices based on ESP32 support up to 16GB. We recommend using a SD card model SDSQUNC-016G-ZN6MA. Ensure the SD card is properly inserted and formatted.
Q2: Using the battery in either of the battery ports on the USB unit or the Core2 forces the unit to stay powered on continuously. Any attempt to shut down using the side button causes the device to restart after.
We have found that the reason is that the filter capacitor capacity of the USB 1.2 module is too large. If you still need to use batteries to power the Core2 + USB 1.2 solution, to avoid frequent restarts, the following two solutions can be adopted:
  • Remove the filter capacitor.
  • Replace it with a smaller capacity filter capacitor (10uF is recommended).
Q3: How to extend the Core2 with an extension module?
You must remove the original bottom and battery of the Core2, then you can stack another module extension.
FAQ section image with questions and answers regarding SD card, battery issue, and extension modules

Figure 8.1: Common questions and solutions for the M5Stack Core2.

9. अर्जाची व्याप्ती

The M5Stack Core2 is suitable for a wide range of applications, including but not limited to:

Collage of M5Stack Core2 applications: Smart home devices, STEM education, IoT controller, DIY projects

आकृती 9.1: उदाamples of M5Stack Core2 applications.

Visual representation of M5Stack Core2's scope of application

Figure 9.2: Further illustration of the M5Stack Core2's versatile applications.

३.१. समर्थन आणि संसाधने

For more detailed tutorials, documentation, and community support, please visit the official M5Stack webसाइट:

www.m5stack.com

Instructions on how to access tutorials on the M5Stack webसाइट

Figure 10.1: Guide to accessing online tutorials and documentation.

M5Stack website logo and URL

Figure 10.2: Official M5Stack webसमर्थनासाठी साइट.

संबंधित कागदपत्रे - K010

प्रीview M5Stack CORE2: ESP32 डेव्हलपमेंट बोर्ड संपलाview आणि जलद सुरुवात मार्गदर्शक
M5Stack CORE2 साठी व्यापक मार्गदर्शक, एक ESP32-आधारित डेव्हलपमेंट बोर्ड ज्यामध्ये 2-इंच TFT स्क्रीन आहे, ज्यामध्ये त्याचे हार्डवेअर, फंक्शन्स, पॉवर मॅनेजमेंट आणि UIFlow क्विक स्टार्टची तपशीलवार माहिती आहे.
प्रीview M5STAC STAMPS3 डेटाशीट आणि तांत्रिक तपशील
M5STACK ST एक्सप्लोर कराAMPS3 डेव्हलपमेंट बोर्ड, ज्यामध्ये वाय-फाय आणि ब्लूटूथ 5 (LE) सह ESP32-S3 चिप आहे. हे डेटाशीट IoT प्रकल्पांसाठी त्याची हार्डवेअर रचना, पिन वर्णन, कार्यात्मक क्षमता आणि विद्युत वैशिष्ट्ये तपशीलवार सांगते.
प्रीview M5Stack AtomS3-Lite ESP32-S3 डेव्हलपमेंट बोर्ड
Explore the M5Stack AtomS3-Lite, a compact ESP32-S3 development board featuring Wi-Fi, integrated antenna, and versatile interfaces for IoT and microcontroller projects. Learn about its specifications, features, and development options with Arduino IDE and UiFlow2.
प्रीview M5StickC Plus2 ऑपरेशन मार्गदर्शन
Comprehensive operation guidance for the M5StickC Plus2 IoT development board. This guide covers common troubleshooting scenarios, including boot failures and battery issues, and provides detailed, step-by-step instructions for flashing official firmware using the M5Burner tool, including essential USB driver installation and port selection procedures.
प्रीview M5STAMP C3 ESP32 IoT डेव्हलपमेंट बोर्ड वापरकर्ता मॅन्युअल
M5ST एक्सप्लोर कराAMP C3, M5Stack चा सर्वात लहान ESP32 सिस्टम बोर्ड. हे मॅन्युअल त्याची वैशिष्ट्ये, तपशीलवार माहिती देते आणि Arduino IDE, ब्लूटूथ आणि WiFi डेव्हलपमेंटसाठी द्रुत प्रारंभ मार्गदर्शक प्रदान करते, जे IoT अनुप्रयोगांसाठी आदर्श बनवते.
प्रीview M5Stack AtomU: ESP32 IoT स्पीच रेकग्निशन डेव्हलपमेंट बोर्ड मार्गदर्शक
ESP32-PICO-D4 मॉड्यूल असलेले कॉम्पॅक्ट IoT स्पीच रेकग्निशन डेव्हलपमेंट बोर्ड, M5Stack AtomU साठी मार्गदर्शक. त्याची वैशिष्ट्ये, Arduino IDE सह सेटअप, ब्लूटूथ सिरीयल कम्युनिकेशन आणि वाय-फाय स्कॅनिंग क्षमता याबद्दल जाणून घ्या.