1. परिचय
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schlage 163604 Addison Lower Half Front Entry Handleset with Accent Lever. This handleset is designed to enhance both the security and aesthetic appeal of your front door. All Schlage front entry handlesets are precision-engineered for security and ease of installation.
Image 1.1: Schlage 163604 Addison Handleset. This image displays the main components of the handleset, including the exterior handleset, interior lever, latch, and mounting hardware.
2. सुरक्षितता माहिती
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in damage to the product, property, or personal injury.
- स्थापनेदरम्यान नेहमी योग्य सुरक्षा उपकरणे, जसे की सुरक्षा चष्मा, घाला.
- Use only the tools specified in the installation guide.
- लहान भाग मुलांपासून दूर ठेवा.
- Do not modify the product in any way, as this may compromise its security features and void the warranty.
3. पॅकेज सामग्री
स्थापना सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा:
- Exterior Handleset Assembly
- Interior Accent Lever Assembly
- लॅच यंत्रणा
- स्ट्राईक प्लेट
- Mounting Screws and Fasteners
- स्थापना टेम्पलेट (जर समाविष्ट असेल तर)
- की (लागू असल्यास)
4. सेटअप आणि स्थापना
The Schlage 163604 handleset is designed for easy installation and can be fitted to both right-hand and left-hand door swings. Its patented adjustable bottom thru-bolt allows for vertical adjustment of 1-1/2 inches to accommodate various pre-existing door preparations.
4.1 दरवाजा तयार करणे
- Ensure your door has the correct bore holes and backset. Refer to the included template for precise measurements.
- If replacing an existing handleset, remove the old hardware.
4.2 Installing the Latch
- Insert the latch into the edge bore hole of the door.
- Secure the latch with the provided screws. Ensure the latch bolt faces the correct direction for your door swing.
4.3 Installing the Exterior Handleset
- Position the exterior handleset assembly on the outside of the door, aligning the spindle with the latch mechanism.
- Feed the thru-bolt through the lower hole in the door. Adjust its position as needed using the patented adjustable feature.
4.4 Installing the Interior Lever
- Place the interior lever assembly on the inside of the door, aligning it with the exterior handleset and latch.
- Secure the interior and exterior components together using the provided screws. Tighten all screws firmly but do not overtighten.
4.5 स्ट्राइक प्लेट स्थापित करणे
- Align the strike plate with the latch bolt on the door frame.
- Mark and chisel out the necessary area for a flush fit, if required.
- Secure the strike plate with the provided screws.
5. ऑपरेटिंग सूचना
To operate your Schlage Addison Handleset:
- लॉक करण्यासाठी: From the interior, rotate the thumbturn to the locked position. From the exterior, insert the key and turn to lock.
- अनलॉक करण्यासाठी: From the interior, rotate the thumbturn to the unlocked position. From the exterior, insert the key and turn to unlock.
- उघडण्यासाठी: Depress the thumbpiece on the exterior handleset or the lever on the interior to retract the latch bolt.
6. देखभाल
योग्य देखभाल तुमच्या हँडलसेटचे दीर्घायुष्य आणि सुरळीत ऑपरेशन सुनिश्चित करते.
- स्वच्छता: हँडलसेट नियमितपणे सॉफ्ट, डी ने स्वच्छ करा.amp कापड. अपघर्षक क्लीनर, सॉल्व्हेंट्स किंवा कठोर रसायने टाळा, कारण ते फिनिशिंगला नुकसान पोहोचवू शकतात.
- स्नेहन: Periodically apply a small amount of graphite-based lubricant to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dirt.
- घट्ट करणे: Check all mounting screws periodically and tighten if necessary. Do not overtighten.
7. समस्या निवारण
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| Lever/Thumbpiece is stiff or sticky | Lack of lubrication, dirt buildup, misaligned components | Apply graphite lubricant to the latch mechanism. Clean the exterior. Check for proper alignment during installation. |
| Key does not turn smoothly | Dirt in keyway, worn key, lock mechanism needs lubrication | Apply graphite lubricant to the keyway. Try a spare key. |
| दरवाजा व्यवस्थित लावला जात नाही. | Strike plate misalignment, latch bolt obstruction | Adjust the strike plate position. Ensure no debris is blocking the latch bolt. |
| Handleset feels loose | Mounting screws are loose | Tighten all visible mounting screws. |
8. तपशील
- मॉडेल क्रमांक: 163604
- ब्रँड: SCHLAGE
- साहित्य: धातू
- रंग: साटन निकेल
- समाप्त: साटन
- शैली: आधुनिक
- उत्पादन परिमाणे: ९.४ x ५.६ x २.५९ सेमी (३.७ x २.२१ x १.०२ इंच)
- आयटम वजन: 2.04 किलो (4.5 पौंड)
- हँडल प्रकार: लीव्हर
- विशेष वैशिष्ट्य: Easy to Install, Patented adjustable bottom thru-bolt
- निर्माता: Allegion Canada Inc
- मूळ देश: मेक्सिको
9. हमी आणि समर्थन
Schlage products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty (where applicable). For specific warranty details, product support, or to contact customer service, please visit the official Schlage webसाइटवर जा किंवा तुमच्या उत्पादनासोबत असलेले वॉरंटी कार्ड पहा.
अधिक मदतीसाठी, कृपया भेट द्या SCHLAGE स्टोअर.
