सिस्को आयपी फोन ८८६१ मल्टी-प्लॅटफॉर्म फोन वापरकर्ता मॅन्युअल

1. परिचय

The Cisco IP Phone 8861 with Multi-Platform Phone firmware is designed to enhance personal productivity in the workplace through its robust and user-friendly features. This office phone offers an ergonomic design, wideband audio for clear voice communications, reliable operation, and encrypted voice communications for enhanced security.

Figure 1: Cisco IP Phone 8861 device overview.

2. प्रमुख वैशिष्ट्ये

• Optimized for Cisco Webex Calling: This device is optimized for Cisco Webex Calling. A Cisco Webex subscription must be purchased separately.
• Fixed Function Keys: Provides one-touch access to essential features such as service, messaging, directory, hold/resume, transfer, and conference.
• Fully Programmable: Line keys can be configured to support directory numbers or call features like speed dialing.
• इष्टतम कामगिरी: Features Class 2 Power over Ethernet (PoE) and a built-in Gigabit Ethernet switch for PC connection.
• सुसंगतता: Integrates with various industry-leading call control platforms, which may require additional licenses or services.

3. पॅकेज सामग्री

तुमच्या पॅकेजमध्ये खालील आयटम असल्याचे सत्यापित करा:

• Cisco IP Phone 8861 (CP-8861-3PW-NA-K9=)
• हँडसेट आणि गुंडाळलेला दोरखंड
• इथरनेट केबल
• दस्तऐवजीकरण

4. सेटअप

1. हँडसेट कनेक्ट करा: Plug one end of the coiled handset cord into the handset port on the phone base and the other end into the handset.
2. नेटवर्कशी कनेक्ट करा: Connect an Ethernet cable from your network switch or router to the network port on the back of the phone. If using Power over Ethernet (PoE), the phone will power on automatically.
3. Connect to PC (Optional): If you wish to connect a PC through the phone, use another Ethernet cable to connect your PC to the PC port on the back of the phone.
4. Connect Power (if not using PoE): If PoE is not available, connect an optional power adapter (sold separately) to the power port on the phone and then to a power outlet.
5. सुरुवातीचे बूट-अप: The phone will power on and begin its boot sequence. This may take a few minutes as it connects to the network and registers with your call control system.
6. कॉन्फिगरेशन: Follow any on-screen prompts or consult your system administrator for specific network and account configurations.

5. ऑपरेटिंग सूचना

5.1 कॉल करणे आणि प्राप्त करणे

• कॉल करण्यासाठी: Lift the handset, press the speaker button, or press a line button. Dial the number using the keypad.
• कॉलला उत्तर देण्यासाठी: Lift the handset, press the speaker button, or press the flashing line button.
• कॉल समाप्त करण्यासाठी: Replace the handset or press the End Call button.

७.२.२ स्थिर फंक्शन की

The phone features dedicated buttons for common functions:

• सेवा: Access various phone services.
• संदेशन: Access voicemail or message indicators.
• निर्देशिका: Access corporate or personal directories.
• Hold/Resume: Place an active call on hold or resume a held call.
• हस्तांतरण: Transfer an active call to another party.
• परिषद: कॉन्फरन्स कॉल सुरू करा.

5.3 Programmable Line Keys

The buttons alongside the display are programmable line keys. They can be configured by your system administrator to function as:

• Additional phone lines (directory numbers).
• Speed dial buttons for frequently called numbers.
• Access to specific call features.

5.4 आवाज नियंत्रण

Use the volume up (+) and volume down (-) buttons to adjust the volume of the handset, headset, or speakerphone during a call, or the ringer volume when the phone is idle.

४.४ हेडसेटचा वापर

The phone supports a headset for hands-free communication. Connect your headset to the dedicated headset port. Press the headset button to activate/deactivate headset mode. Note that a headset is sold separately.

5.6 इतर कार्ये

• निःशब्द: Press the Mute button to mute your microphone during a call. Press again to unmute.
• वक्ता: Press the Speaker button to use the speakerphone. Press again to turn off the speakerphone.
• पुन्हा डायल करा: Access your call history and redial previous numbers.
• रेकॉर्डिंग: Access and manage call recordings (if enabled by your system administrator).
• Group Calling: Utilize features for group calls as configured by your system.

6. देखभाल

• स्वच्छता: Use a soft, dry cloth to clean the phone's exterior. Avoid abrasive cleaners or solvents.
• पर्यावरण: फोन कोरड्या वातावरणात ठेवा, थेट सूर्यप्रकाश आणि अति तापमानापासून दूर.
• केबल्स: सर्व केबल्स सुरक्षितपणे जोडल्या गेल्या आहेत आणि त्या चिमटे किंवा खराब झालेल्या नाहीत याची खात्री करा.

7. समस्या निवारण

५.१ डायल टोन नाही

• Check all cable connections, especially the Ethernet cable to the network port.
• Ensure the phone is receiving power (either via PoE or power adapter).
• Contact your system administrator if the issue persists.

7.2 Cannot Make or Receive Calls

• Verify the phone is registered with your call control system (check the display for status messages).
• Ensure your network connection is active.
• Confirm that your account is active and has calling privileges.
• Contact your system administrator for assistance.

७.३ खराब ऑडिओ गुणवत्ता

• Check handset and headset connections.
• व्हॉल्यूम बटणे वापरून आवाज समायोजित करा.
• इतर इलेक्ट्रॉनिक उपकरणांचा कोणताही हस्तक्षेप नाही याची खात्री करा.
• Verify network quality and bandwidth.

8. तपशील

ब्रँड:

सिस्को

मॉडेल क्रमांक:

CP-8861-3PW-NA-K9=

आयटम वजन:

5.1 पाउंड

पॅकेजचे परिमाण:

14.92 x 12.64 x 4.72 इंच

रंग:

काळा, राखाडी

दूरध्वनी प्रकार:

आयपी फोन

उर्जा स्त्रोत:

कॉर्ड केलेले इलेक्ट्रिक

डायलर प्रकार:

सिंगल कीपॅड

उत्तर प्रणाली प्रकार:

डिजिटल

सुसंगत उपकरणे:

Mobile devices, Cisco Webex Calling, other call control platforms

कॉन्फरन्स कॉल क्षमता:

2 मार्ग

मल्टीलाइन ऑपरेशन:

मल्टी-लाइन ऑपरेशन

कॉलर ओळख:

होय

9. हमी आणि समर्थन

For warranty information and technical support, please refer to the documentation provided with your product or visit the official Cisco support website. Specific warranty terms may vary by region and reseller.