Eiko 43A/CL/H-120V

Eiko Halogen A19 43W Clear 120V Bulb User Manual

Model: 43A/CL/H-120V

1. महत्वाची सुरक्षितता माहिती

Please read all instructions carefully before installing or using this Eiko Halogen A19 bulb. Failure to follow these instructions may result in electric shock, fire, or other hazards.

2. सेटअप आणि स्थापना

Follow these steps to safely install your Eiko Halogen A19 bulb:

  1. पॉवर बंद करा: Locate the light fixture's power switch and turn it to the "OFF" position. For added safety, turn off the power at the main circuit breaker or fuse box.
  2. थंड करण्याची परवानगी द्या: जर तुम्ही आधीचा बल्ब बदलत असाल तर त्याला स्पर्श करण्यापूर्वी तो पूर्णपणे थंड झाला आहे याची खात्री करा.
  3. जुना बल्ब काढा: सॉकेटमधून जुना बल्ब घड्याळाच्या उलट दिशेने काळजीपूर्वक काढा.
  4. फिक्स्चर तपासा: लाईट फिक्स्चरच्या सॉकेटमध्ये कोणतेही नुकसान किंवा मोडतोड आहे का ते तपासा. ते स्वच्छ आणि कोरडे असल्याची खात्री करा.
  5. नवीन बल्ब बसवा: Gently screw the Eiko Halogen A19 bulb clockwise into the socket until it is snug. Do not overtighten.
  6. पुनर्संचयित शक्ती: Turn the power back on at the circuit breaker or fuse box, then turn on the light switch.
Eiko Halogen A19 43W Clear 120V Bulb

Image 1: Eiko Halogen A19 43W Clear 120V Bulb. This image shows the clear glass bulb with a standard screw-in base, typical of an A19 shape.

3. ऑपरेटिंग सूचना

The Eiko Halogen A19 bulb operates like a standard incandescent bulb. Once installed, simply use the light fixture's switch to turn the bulb on or off.

4. देखभाल

Minimal maintenance is required for your Eiko Halogen A19 bulb. However, following these guidelines can help ensure optimal performance and longevity:

5. समस्या निवारण

If your Eiko Halogen A19 bulb is not functioning as expected, refer to the following common issues and solutions:

समस्यासंभाव्य कारणउपाय
बल्ब पेटत नाही.
  • फिक्स्चरला शक्ती नाही.
  • बल्ब व्यवस्थित स्क्रू केलेला नाही.
  • बल्ब सदोष आहे किंवा त्याचे आयुष्य संपले आहे.
  • Fixture switch is off.
  • सर्किट ब्रेकर/फ्यूज तपासा.
  • Ensure bulb is securely screwed into the socket (power off first).
  • नवीन बल्ब बदला.
  • Turn on the fixture switch.
बल्ब फ्लिकर्स.
  • सॉकेटमधील कनेक्शन सैल झाले आहे.
  • विसंगत डिमर स्विच.
  • खंडtage चढउतार.
  • Turn off power, then tighten the bulb.
  • Ensure dimmer is compatible with halogen bulbs.
  • जर व्हॉल्यूम असेल तर इलेक्ट्रिशियनचा सल्ला घ्याtagसमस्या कायम आहेत.
बल्ब लवकर जळतो.
  • ओव्हर-वॅटtage फिक्स्चरसाठी.
  • Frequent power surges.
  • जास्त कंपन.
  • Touching glass with bare hands during installation.
  • Verify fixture's maximum wattage.
  • Consider a surge protector for the circuit.
  • Ensure fixture is stable.
  • Handle new bulbs with a cloth or gloves.

6. उत्पादन तपशील

Detailed specifications for the Eiko Halogen A19 43W Clear 120V bulb:

7. हमी आणि समर्थन

7.1. मर्यादित वॉरंटी

Eiko products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship under normal use. The specific duration and terms of the warranty may vary. Please retain your proof of purchase for warranty claims.

7.2. ग्राहक समर्थन

For technical assistance, warranty inquiries, or further information regarding your Eiko Halogen A19 bulb, please contact Eiko customer support. Refer to the official Eiko webसर्वात अद्ययावत संपर्क माहितीसाठी साइट किंवा उत्पादन पॅकेजिंग.

संबंधित कागदपत्रे - 43A/CL/H-120V

प्रीview EIKO LHS1 Series LED Linear High Bay Installation Instructions
Comprehensive installation guide for the EIKO LHS1 Series LED Linear High Bay fixtures, covering overview, safety precautions, mounting options, wiring diagrams, and controls.
प्रीview EIKO LED T8 लिनियर ट्यूब इंस्टॉलेशन सूचना
EIKO LED T8 टाइप B लिनियर ट्यूब लाईट्ससाठी सर्वसमावेशक इंस्टॉलेशन सूचना, ज्यामध्ये सुरक्षा खबरदारी, देखभाल आणि फ्लोरोसेंट ल्युमिनेअर्स रेट्रोफिटिंगसाठी तपशीलवार वायरिंग आकृत्या समाविष्ट आहेत.
प्रीview EIKO VL1 मालिका LED व्हॉल्यूमेट्रिक ट्रॉफर इंस्टॉलेशन सूचना
EIKO VL1 सिरीज LED व्हॉल्यूमेट्रिक ट्रॉफरसाठी व्यापक स्थापना मार्गदर्शक, ज्यामध्ये समाविष्ट आहेview, सुरक्षा खबरदारी, स्थापना चरणे, वायरिंग स्कीमॅटिक्स आणि सेन्सर स्थापना. पॉवर आणि सीसीटी निवड समाविष्ट आहे.
प्रीview फोटोसेल इंस्टॉलेशन गाइडसह EIKO Z10 मायक्रोवेव्ह बाय-लेव्हल डिमिंग सेन्सर
फोटोसेलसह EIKO Z10 मायक्रोवेव्ह बाय-लेव्हल डिमिंग सेन्सरसाठी व्यापक स्थापना मार्गदर्शक, योग्य सेटअप आणि ऑपरेशनसाठी तपशीलवार तपशील, सेन्सर कव्हरेज आणि FCC अनुपालन माहिती.
प्रीview EIKO CSX1 मालिका LED कमर्शियल स्ट्रिप प्रीमियम इंस्टॉलेशन सूचना
EIKO CSX1 सिरीज LED कमर्शियल स्ट्रिप प्रीमियम फिक्स्चर, कव्हरिंग सरफेस माउंट, चेन माउंट आणि पर्यायी अॅक्सेसरी इंस्टॉलेशनसाठी व्यापक इंस्टॉलेशन मार्गदर्शक.
प्रीview EIKO LED सरफेस कॅनोपी स्क्वेअर इंस्टॉलेशन सूचना
या दस्तऐवजात EIKO LED सरफेस कॅनोपी स्क्वेअर फिक्स्चरसाठी तपशीलवार इंस्टॉलेशन सूचना प्रदान केल्या आहेत, ज्यामध्ये सुरक्षा खबरदारी, पृष्ठभाग माउंटिंग, साइड वायरिंग, पेंडेंट माउंटिंग, पॉवर अॅडजस्टमेंट आणि Z10 सेन्सर इंस्टॉलेशन यांचा समावेश आहे.